Fee can now be multiplied by 2 or 3, if users want to give
priority to their transactions. There are only three levels
to avoid too much fingerprinting. Default is 1 (minimum fee).
The default multiplier can be set by "set fee-multiplier X".
It sets the max number of threads to use for a parallel job.
This is different that the number of total threads, since monero
binaries typically start a lot of them.
It allows a simple get_transfers (with default 0 min_height and
max_height) to return all transactions, instead of the unexpected
set of txes in block 0, which is probably none at all.
This sends all outputs in a wallet to a given address, alleviating
the difficulty people have had trying to send all monero but
being left with some small amount left.
modified: src/wallet/wallet2.cpp
modified: src/wallet/wallet2.h
Update to fix unconfirmed balance and give a slightly more verbose and informative confirmation message for transfers
When m_refresh_from_block_height has been set, only hashes will be
retrieved up to that height, instead of full blocks. The same will
be done for "refresh <height>" when the specified height is beyond
the current local blockchain.
b4eada9 wallet: make load_keys check types when loading JSON (moneromooo-monero)
3e55725 wallet: make the JSON reading type safe (moneromooo-monero)
f8d05f3 common: new json_util.h (moneromooo-monero)
This allows appropriate action to be taken, like displaying
the reason to the user.
Do just that in simplewallet, which should help a lot in
determining why users fail to send.
Also make it so a tx which is accepted but not relayed is
seen as a success rather than a failure.
With the change in mixin rules for v2, the "annoying" outputs are
slightly changed. There is high correlation between dust and
unmixable, but no equivalence.
It takes a filename containing JSON data to generate a wallet.
The following fields are valid:
version: integer, should be 1
filename: string, path/filename for the newly created wallet
scan_from_height: 64 bit unsigned integer, optional
password: string, optional
viewkey: string, hex representation
spendkey: string, hex representation
seed: string, optional, list of words separated by spaces
Either seed or private keys should be given. If using private
keys, the spend key may be omitted (the wallet will not be
able to spend, but will see incoming transactions).
If scan_from_height is given, blocks below this height will not
be checked for transactions as an optimization.
After the fork, normal transfer functions called via RPC
use the minimum mixin 2 if 0 or 1 is requested. While the
incoming transaction may be valid (eg, it has an unmixable
and at most a mixable input), it is a simple way to make
sure RPC users can't get a seemingly random accept/reject
behavior if they don't update their requested mixin.
If it is, it points to reuse of a tx key, which isn't meant to happen.
If it does, a key image collision means that only one of those
outputs is spendable, so the wallet selects the larger amount,
unless that output was spent already.
This causes a discrepancy betewen reported received inputs and
payment total.
Since tx keys are 256 bits, this should never happen except if
done on purpose, or if a sender uses a bad PRNG.
7fc6fa3 wallet: forbid dust altogether in output selection where appropriate (moneromooo-monero)
5e1a739 blockchain: log number of outputs available for a new tx (moneromooo-monero)
The value will be different depending on whether we've reached
the first hard fork, which allows a larger size, or not.
This fixes transactions being rejected by the daemon on mainnet
where the first hard fork is not yet active.
Blockchain hashes and key images are flushed, and blocks are
pulled anew from the daemon.
The console command is shortened to match bc_height.
This should make it a lot easier on users who are currently
told to remove this particular cache file but keep the keys
one, etc, etc.
The version number passed to those data's serialize function
was always 0, not the wallet's version as I had expected.
A version number now exists for these structures so they're
versioned correctly.
^C while in manual refresh will cancel the refresh, since that's
often an annoying thing to have to wait for. Also, a manual refresh
command will interrupt any running background refresh and take
over, rather than wait for the background refresh to be done, and
look to be hanging.
The daemon will be polled every 90 seconds for new blocks.
It is enabled by default, and can be turned on/off with
set auto-refresh 1 and set auto-refresh 0 in the wallet.
Assume the whole of a coinbase goes to the same address (so that
if the first output isn't for us, none of it is), and only look
for payment id when we received something in the transaction.
The wallet and the daemon applied different height considerations
when selecting outputs to use. This can leak information on which
input in a ring signature is the real one.
Found and originally fixed by smooth on Aeon.
f197599 wallet: encrypt the cache file (moneromooo-monero)
98c76a3 chacha8: add a key generation variant that take a pointer and size (moneromooo-monero)
It contains private data, such as a record of transactions.
The key is derived from the view and spend secret keys.
The encryption currently is one shot, so may require a lot of
memory for large wallet caches.
This obsoletes the need for a lengthy blockchain rescan when
a transaction doesn't end up in the chain after being accepted
by the daemon, or any other reason why the wallet's idea of
spent and unspent outputs gets out of sync from the blockchain's.
Pros:
- smaller on the blockchain
- shorter integrated addresses
Cons:
- less sparseness
- less ability to embed actual information
The boolean argument to encrypt payment ids is now gone from the
RPC calls, since the decision is made based on the length of the
payment id passed.
A payment ID may be encrypted using the tx secret key and the
receiver's public view key. The receiver can decrypt it with
the tx public key and the receiver's secret view key.
Using integrated addresses now cause the payment IDs to be
encrypted. Payment IDs used manually are not encrypted by default,
but can be encrypted using the new 'encrypt_payment_id' field
in the transfer and transfer_split RPC calls. It is not possible
to use an encrypted payment ID by specifying a manual simplewallet
transfer/transfer_new command, though this is just a limitation
due to input parsing.
It should avoid a lot of the issues sending more than half the
wallet's contents due to change.
Actual output selection is still random. Changing this would
improve the matching of transaction amounts to output sizes,
but may have non obvious effects on blockchain analysis.
Mapped to the new transfer_new command in simplewallet, and
transfer uses the existing algorithm.
To use in RPC, add "new_algorithm: true" in the transfer_split
JSON command. It is not used in the transfer command.
dc4dbc1 simplewallet: allow creating a wallet from a public address and view secret key (moneromooo-monero)
6a0f61d account: allow creating an account from a public address and view secret key (moneromooo-monero)
e05a58a wallet2: fix write_watch_only_wallet comment description (moneromooo-monero)
4bf6f0d simplewallet: forbid seed commands for watch only wallets (moneromooo-monero)
The new save_watch_only saves a copy of the keys file without the
spend key. It can then be given away to be used as a normal keys
file, but with no spend ability.
Sends all the dust to your own wallet. May fail (if the fee required
is more than the dust total). May end up paying most of the dust in fees.
Unlocked dust total is now also displayed in "balance".
Based on tewinget's update.
Make OpenAlias address format independent of existing DNS functions.
Add tests.
Test:
make debug-test
cd build/debug/tests/unit_tests
# test that regular DNS functions work, including IPv4 lookups.
# also test function that converts OpenAlias address format
make && ./unit_tests --gtest_filter=DNSResolver*
# test that OpenAlias addresses like donate@getmonero.org work from
# wallet tools
make && ./unit_tests --gtest_filter=AddressFromURL.Success
Daemon interactive mode is now working again.
RPC mapped calls in daemon and wallet have both had connection_context
removed as an argument as that argument was not being used anywhere.
simplewallet run without a wallet path argument should prompt again if
an invalid path was entered.
Validity here currently means the string isn't empty.
Allow pre-JSON wallet format to load without depending on existing bin
file.
Don't write bin file while inside keys rewrite, so bin file write
behavior here matches that of regular wallet load.
Fix for simplewallet loading a wallet with a keys file but no bin file.
- this situation previously required a user to restart simplewallet
before it would refresh its blockchain from the server.
f9822c4 wallet JSON update for non-deterministic wallet data (warptangent)
4c6230d Checking and handling for deterministic vs non-deterministic wallet (warptangent)
1beedb9 Extract check for deterministic keys to wallet2::is_deterministic() (warptangent)
359ede3 indentation (warptangent)
2290eff replace lines with call to recently added print_seed() (warptangent)
wallet2::store_keys() and wallet2::load_keys() should only use the JSON
attribute "seed_language" when applicable. That is only for
deterministic wallets.
- store_keys() don't add JSON attribute "seed_language" if
seed_language is empty
- load_keys() don't call set_seed_language if JSON attribute
"seed_language" not present
f1eaf88 Prints seed after wallet upgrade. Removed iostream include. (Oran Juice)
70971be Doxygen comments (Oran Juice)
031ca23 Rewrites to old wallet file correctly (Oran Juice)
1f833dc Doxygen comments in (Oran Juice)
0bd88ff Writes seed language while generating wallet. Wallet open fix. (Oran Juice)
09a659e Stores seed language in wallet file. added rapidjson. Yet to test backward compatibility (Oran Juice)
dde7897 Disable legacy fees for now (iamsmooth)
cc74b43 Remove DEFAULT_FEE, add temporary acceptance of too-small per-kb fee >= 0.1, denominations based on DEFAULT_DUST_THRESHOLD, document fee arg to create_transactions as unused, se DEFAULT_DUST_THRESHOLD for wallet dust collection instead of calcualted tx fee (iamsmooth)
ce71c01 cmake: work around a bug with implicit link directories (Ben Boeckel)
de4fc40 mingw: copy required libraries to the build tree (Ben Boeckel)
ec54e2f cmake: place binaries together in the build tree (Ben Boeckel)
18c56ab msys: don't use LTO (Ben Boeckel)
5680c9c msys: factor out -Werror on msys (Ben Boeckel)
4751542 msys: look in msys' directory for files (Ben Boeckel)
d855fe4 miniupnpc: bump the _POSIX_C_SOURCE feature macro (Ben Boeckel)
c696492 unbound: fix getaddrinfo detection for 32-bit windows (Ben Boeckel)
e377687 cmake: Windows and static builds need this (Ben Boeckel)
01895dd cmake: fix up link lines (Ben Boeckel)
4b6515c unbound: fix type checking (Ben Boeckel)
d43a20f unbound: plumb the libdir up (Ben Boeckel)
7d708e4 cmake: support 2.8.7 (Ben Boeckel)
464c280 cmake: fix up miniupnpc's define (Ben Boeckel)
9689df9 cmake: clean up EXTRA_LIBRARIES (Ben Boeckel)
3b7bdcb cmake: set the project name (Ben Boeckel)
0f0efc4 cmake: prepend to CMAKE_MODULE_PATH (Ben Boeckel)
031e3da cmake: remove scream-make (all-caps functions) (Ben Boeckel)
abbd5c0 unbound: import cmake build system (Ben Boeckel)
e59b5b7 miniupnpc: clean up build system (Ben Boeckel)
475fe20 cmake: minor cleanups (indentation and typos) (Ben Boeckel)
799e8b2 cmake: use option() for STATIC (Ben Boeckel)
c24d22b cmake: clean up if auto-dereferencing (Ben Boeckel)
9ed415a build: inform the build of what generates version.h (Ben Boeckel)
eba180a cmake: support git info in released tarballs (Ben Boeckel)
eeffac6 cmake: fix up BOOST_IGNORE_SYSTEM_PATHS (Ben Boeckel)
a43f1a8 cmake: remove configuration variables (Ben Boeckel)
a87ce09 cmake: factor out error messages (Ben Boeckel)
9aa48b6 miniupnpc: clear out else/endfoo command arguments (Ben Boeckel)
8a86ac8 daemon_tests: update cmake code (Ben Boeckel)
fa3ff75 gtest: support an external gtest (Ben Boeckel)
7bfcffa cmake: put each test executable in its own directory (Ben Boeckel)
f53f047 cmake: handle private vs. public headers (Ben Boeckel)
55ca7d3 cmake: refactor common code with libraries (Ben Boeckel)
c773f46 cmake: refactor common code with executables (Ben Boeckel)
89cff7b cmake: put each library into its own directory (Ben Boeckel)
Note: DNSResolver does not yet *use* DNSSEC, but rather this commit is
preparation for including DNSSEC validation. The function in
src/wallet/wallet2.cpp that uses DNSResolver still needs its parameters
updated accordingly.
wallet RPC now uses wallet2::create_transactions and wallet2::commit_tx instead
of wallet2::transfer. This made it possible to add the RPC call /transfer_split, which
will split transactions automatically if they are too large. The old call to
/transfer will return an error stating to use /transfer_split if multiple
transactions are needed to fulfill the request.
