Asks user for all the data required to merge secret keys from multisig wallets into one master wallet, which then gets full control of the multisig wallet. The resulting wallet will be the same as any other regular wallet.
Library code should definitely not ask for console input unless
it's clearly an input function. Delegating the user interaction
part to the caller means it can now be used by a GUI, or have a
decision algorithm better adapted to a particular caller.
3b599d2b wallet2: get current height from the daemon on creation (moneromooo-monero)
d3bb72ff wallet2: fix infinite loop on future refresh height (moneromooo-monero)
32754784 wallet: fix refresh_from_height setting on new wallet (moneromooo-monero)
76043b17 monero-wallet-cli: hang on exit in readline code (#2117) (moneromooo-monero)
a73a42a6 monero-wallet-cli: hang on exit in readline code (#2117) (moneromooo-monero)
be9d4f04 Fix multiline wallet cli output with readline (Jethro Grassie)
The previous patch was based on a wrong premise (that the
daemon height was 0 because the daemon calling code wasn't
yet initialized). In fact, current height approximation
was not setup for testnet. Fix this.
monero-wallet-cli commands which have multine output sometimes causes
issues with the readline support. This patch fixes show_transfers,
payments and incoming_transfers.
Add fail-fast paths that reduce frustration around the misuse of
--wallet-file combined with --restore-deterministic-wallet. Flow now
gives more descriptive errors and avoids having users type in their
whole seed before the failure condition is noticed.
With the recent change to wallet creation code, the code was
calling to the daemon before the wallet's daemon address was
initialized, and thus failing. This was causing all new wallets
to refresh from 0 instead of just fetching early block hashes.
It sweeps all outputs below the given threshold
This is available via the existing sweep_all RPC, by setting
amount_threshold the desired amount (in atomic units)
0ee018b4 wallet2: do not go over the target tx size if many destinations (moneromooo-monero)
9ae566d0 simplewallet: fix cold signing of split transactions (moneromooo-monero)
aae14a10 simplewallet: allow setting confirm-missing-payment-id in watch wallets (moneromooo-monero)
They'd be rejected as suspicious as the change goes to more
than one destination. However, split transactions will most
likely include fake zero amount change to random addresses,
so we only consider change with non zero amount for this.
With the change from the original transfer method to the new
algorithm, payments to the same destination were merged. It
seemed like a good idea, optimizing space. However, it is a
useful tool for people who want to split large outputs into
several smaller ones (ie, service providers making frequent
payments, and who do not like a large chunk of their balance
being locked for 10 blocks after each payment).
Default to off, which is a change from the previous behavior.
When a single input is enough to satisfy a transfer, the code would
previously try to add a second input, to match the "canonical" makeup
of a transaction with two inputs and two outputs. This would cause
wallets to slowly merge outputs till all the monero ends up in a
single output, which causes trouble when making two transactions
one after the other, since change is locked for 10 blocks, and an
increasing portion of the remaining balance would end up locked on
each transaction.
There are two new settings (min-output-count and min-output-value)
which can control when to stop adding such unneeded second outputs.
The idea is that small "dust" outputs will still get added, but
larger ones will not.
Enable with, eg:
set min-output-count 10
set min-output-value 30
to avoid using an unneeded second output of 30 monero or more, if
there would be less than 10 such outputs left.
This does not invalidate any other reason why such outputs would
be used (ie, when they're really needed to satisfy a transfer, or
when randomly picked in the normal course of selection). This may
be improved in the future.
New pull request because I couldn't figure out how to change the previous one.
1. For clarity, I want to focus the help text for the 'transfer' command on the most typical use case (a single payment).
2. New users will prefer to use 'transfer', so the older method 'transfer_original' should refer to 'transfer' rather than the other way around.
This would otherwise be a silent noop, which is confusing.
This can happen if the daemon is started, but not yet ready
to service all requests, and this is a safe catch all.
Minimum mixin 4 and enforced ringct is moved from v5 to v6.
v5 is now used for an increased minimum block size (from 60000
to 300000) to cater for larger typical/minimum transaction size.
The fee algorithm is also changed to decrease the base per kB
fee, and add a cheap tier for those transactions which we do
not care if they get delayed (or even included in a block).
7a44f38a Add support for the wallet to refresh pruned blocks (moneromooo-monero)
da18898f ringct: do not require range proof in decodeRct/decodeRctSimple (moneromooo-monero)
b49c6ab4 rpc: add a default category for daemon rpc (moneromooo-monero)
f113b92b core: add functions to serialize base tx info (moneromooo-monero)
6fd4b827 node_rpc_proxy: allow caching daemon RPC version (moneromooo-monero)
b5c74e40 wallet: invalidate node proxy cache when reconnecting (moneromooo-monero)
c02e1cb9 Updates to epee HTTP client code - http_simple_client now uses std::chrono for timeouts - http_simple_client accepts timeouts per connect / invoke call - shortened names of epee http invoke functions - invoke command functions only take relative path, connection is not automatically performed (Lee Clagett)
- http_simple_client now uses std::chrono for timeouts
- http_simple_client accepts timeouts per connect / invoke call
- shortened names of epee http invoke functions
- invoke command functions only take relative path, connection
is not automatically performed
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
Not 100$ sure this is the right fix, nor whether address book entries from URL should be stored as addresses or URLs (or both with a check for change on payment).
c2135082 simplewallet: add a show_transfer <txid> command (moneromooo-monero)
19c4041d wallet_rpc_server: new RPC call to get a transfer by txid (moneromooo-monero)
The serialization format changed, and while there is code
to load the older serialization format, an older monerod
will not be able to load a file saved by a new monerod,
even though both share the same version. This is not good,
and we prefer a version bump.
c367d7df README: add note about the donate command (anonimal)
b9a28677 simplewallet: add return type for donate function (anonimal)
d36669fd simplewallet: hardcode Monero's donation address (anonimal)
Daemon RPC version is now composed of a major and minor number,
so that incompatible changes bump the major version, while
compatible changes can still bump the minor version without
causing clients to unnecessarily complain.
a0131c8 wallet: auto sync outputs and key images in cold signing files (moneromooo-monero)
f806611 wallet2: fill key image and pubkey maps when importing outputs (moneromooo-monero)
5fe363c wallet: cast indices to string in logs to be nice to CLANG (moneromooo-monero)
11ae187 wallet2: try all tx keys when scanning a new transaction (moneromooo-monero)
072d646 wallet2: fill in key image map when importing key images (moneromooo-monero)
23d80b1 core: remove any tx pubkey from extra before adding one (moneromooo-monero)
d72376d simplewallet: add a verbose flag to incoming_transfers (moneromooo-monero)
47413a5 simplewallet: spell out change when signing a transfer (moneromooo-monero)
14cb088 simplewallet: print public keys too on spendkey/viewkey commands (moneromooo-monero)
a99ab49 wallet: fix serialization of new m_key_image_known member (moneromooo-monero)
When passing around unsigned and signed transactions, outputs
and key images are passed along (outputs are passed along unsigned
transactions from the hot wallet to the cold wallet, key images
are passed along with signed transations from the cold wallet
to the hot wallet), to allow more user friendly syncing between
hot and cold wallets.
m_amount_out was sometimes getting initialized with the sum of
an transaction's outputs, and sometimes with the sum of outputs
that were not change. This caused confusion and bugs. We now
always set it to the sum of outputs. This reverts an earlier
fix for bad amounts as this used the other semantics. The wallet
data should be converted automatically in a percentage of cases
that I'm hesitant to estimate. In any case, restoring from seed
or keys or rebuilding the cache will get it right.
7e6d3cf wallet: set incoming outputs' key image to 0 on view wallets (moneromooo-monero)
1f9e6a4 wallet: print tx overview on submit_transfer too (moneromooo-monero)
The intended use is to export outputs from a hot wallet, which
can scan incoming transfers from the network, and import them
in the cold wallet, which can't. The cold wallet can then compute
key images for those outputs, which can then be exported with
export_key_images, etc.
Re-creating the transaction on the cold wallet was not splitting
the change, causing the transaction to be rejected by the network.
This worked on testnet since amounts do not have to be split.
Also add selected_transfers, which can now be saved since they're
size_t rather than iterators. This allows the view wallet to
properly set the sent outputs as spent and update balance.
Bump transfer file version numbers to match.
Factor locked_transfer into transfer_main, which brings various
improvements for free (multiple addresses, proper detection of
multiple payment ids, obeying the prompt settings).
Also fix a few things, such as using uint64_t instead of int
for block heights, actually checking whether getting blockchain
height succeeded, etc.
714ee99 Fix description for locked_transfer (Oyvind Kvanes)
71538f3 Rename to lockblocks and add max value (Oyvind Kvanes)
68ac060 Fix locked_transfer (Oyvind Kvanes)
7d020bd Add locked_transfer (Oyvind Kvanes)
d5f918a Revert transfer_main in simplewallet (Oyvind Kvanes)
3451963 Add motifications to test out locked_transfer (Oyvind Kvanes)
e5e6d88 Add more information to transaction in wallet (Oyvind Kvanes)
9b8a062 Make a small test change (Oyvind Kvanes)
bba6af9 wallet: cold wallet transaction signing (moneromooo-monero)
9872dcb wallet: fix log confusion between bytes and kilobytes (moneromooo-monero)
d9b0bf9 cryptonote_core: make extra field removal more generic (moneromooo-monero)
98f19d4 serialization: add support for serializing std::pair and std::list (moneromooo-monero)
Changed the wording from "from 0 to maximum available" to "from 2 to maximum available".
May I also suggest putting in a number rather than "maximum available" and also clarifying that mixin = 0 is still allowed if the user has unmixable outputs (dust), which he wants to "undust" using sweep_unmixable (comment from dEBRUYNE-1 ).
This change adds the ability to create a new unsigned transaction
from a watch only wallet, and save it to a file. This file can
then be moved to another computer/VM where a cold wallet may load
it, sign it, and save it. That cold wallet does not need to have
a blockchain nor daemon. The signed transaction file can then be
moved back to the watch only wallet, which can load it and send
it to the daemon.
Two new simplewallet commands to use it:
sign_transfer (on the cold wallet)
submit_transfer (on the watch only wallet)
The transfer command used on a watch only wallet now writes an
unsigned transaction set in a file called 'unsigned_monero_tx'
instead of submitting the tx to the daemon as a normal wallet does.
The signed tx file is called 'signed_monero_tx'.
We keep 1, 2, 3 multipliers till the fee decrase from 0.01/kB
to 0.002/kB, where we start using 1, 20, 166 multipliers.
This ensures the higher multiplier will compensate for the
block reward penalty when pushing past 100% of the past median.
The fee-multiplier wallet setting is now rename to priority,
since it keeps its [0..3] range, but maps to different multiplier
values.
This allows the key to be not the same for two outputs sent to
the same address (eg, if you pay yourself, and also get change
back). Also remove the key amounts lists and return parameters
since we don't actually generate random ones, so we don't need
to save them as we can recalculate them when needed if we have
the correct keys.
The "transfer" simplewallet command is renamed to "transfer_original".
"transfer_new" is renamed "transfer", "transfer_rct" is removed,
and the new "transfer" now selects rct or non rct transactions
based on the current block height.
This plugs a privacy leak from the wallet to the daemon,
as the daemon could previously see what input is included
as a transaction input, which the daemon hadn't previously
supplied. Now, the wallet requests a particular set of
outputs, including the real one.
This can result in transactions that can't be accepted if
the wallet happens to select too many outputs with non standard
unlock times. The daemon could know this and select another
output, but the wallet is blind to it. It's currently very
unlikely since I don't think anything uses non default
unlock times. The wallet requests more outputs than necessary
so it can use spares if any of the returns outputs are still
locked. If there are not enough spares to reach the desired
mixin, the transaction will fail.
Simplewallet improperly skipped the restore from height code if
restoring a deterministic wallet AND not specifying a wallet file in the
command line. The other generate options require a wallet file as an
argument, which prevents "ask_wallet_create_if_needed()" from being
called, which in turn causes "m_generate_new" to remain unset.
Specifying a wallet file at launch with --restore-deterministic emulated
this behavior.
Squashed commit of the following:
commit 9af9e4223b58bbb65a3519af2c2bfc273cbd23d6
fixed some formatting
commit c7920e1cf88ff46eb9294101344d9a567f22e2da
Merge: 97eb28b 1da1c68
fix#864 fix using boolean
commit 97eb28ba5dd49ddde8c8785f39b24d955e5de31c
Fix#864 boolean value used to verify on new wallet
commit 1da1c68bd3a9a373c70482b6e6e95251096149f1
fix#864 changed to boolean to prompt for verify
commit 5bee96652434762d2c91ce31a1b1c9f169446ddc
fix 864; made variable names easier for understanding branching.
commit 45715960d30293f781b2ff9e5e647c2ec893f4a3
fix#864; allow password to be entered twice for new wallets for verification.
fix#864 password entry verification; ammended boolean
fix#864 ; default constructor for password_container should set verify=true
They are used to export a signed set of key images from a wallet
with a private spend key, so an auditor with the matching view key
may see which of those are spent, and which are not.
Signing is done using the spend key, since the view key may
be shared. This could be extended later, to let the user choose
which key (even a per tx key).
simplewallet's sign/verify API uses a file. The RPC uses a
string (simplewallet can't easily do strings since commands
receive a tokenized set of arguments).
Fee can now be multiplied by 2 or 3, if users want to give
priority to their transactions. There are only three levels
to avoid too much fingerprinting. Default is 1 (minimum fee).
The default multiplier can be set by "set fee-multiplier X".
It sets the max number of threads to use for a parallel job.
This is different that the number of total threads, since monero
binaries typically start a lot of them.
We want to lock operations which access the blockchain in
wallet2. We also want the background refresh to happen again
when we cancel a foreground refresh. Wrap the locking setup
in a macro so it doesn't get copy/pasted/mangled, and use
a scope exit trick to ensure it's always properly restored.
This sends all outputs in a wallet to a given address, alleviating
the difficulty people have had trying to send all monero but
being left with some small amount left.
modified: src/wallet/wallet2.cpp
modified: src/wallet/wallet2.h
Update to fix unconfirmed balance and give a slightly more verbose and informative confirmation message for transfers
^C when in RPC mode would not save the wallet while it was still
refreshing after starting up.
Also, save the wallet out of the signal handler. We don't want
to call complex stuff in a signal handler.
b4eada9 wallet: make load_keys check types when loading JSON (moneromooo-monero)
3e55725 wallet: make the JSON reading type safe (moneromooo-monero)
f8d05f3 common: new json_util.h (moneromooo-monero)
This allows appropriate action to be taken, like displaying
the reason to the user.
Do just that in simplewallet, which should help a lot in
determining why users fail to send.
Also make it so a tx which is accepted but not relayed is
seen as a success rather than a failure.
With the change in mixin rules for v2, the "annoying" outputs are
slightly changed. There is high correlation between dust and
unmixable, but no equivalence.
It takes a filename containing JSON data to generate a wallet.
The following fields are valid:
version: integer, should be 1
filename: string, path/filename for the newly created wallet
scan_from_height: 64 bit unsigned integer, optional
password: string, optional
viewkey: string, hex representation
spendkey: string, hex representation
seed: string, optional, list of words separated by spaces
Either seed or private keys should be given. If using private
keys, the spend key may be omitted (the wallet will not be
able to spend, but will see incoming transactions).
If scan_from_height is given, blocks below this height will not
be checked for transactions as an optimization.
It would try to join the auto refresh thread, which would
only happen after it was done, which would take a long time
when doing so on a newly created wallet.
c2a1fee simplewallet: prompt for private keys when generating wallets (moneromooo-monero)
4513b4c simplewallet: add a new --restore-from-keys option (moneromooo-monero)
Blockchain hashes and key images are flushed, and blocks are
pulled anew from the daemon.
The console command is shortened to match bc_height.
This should make it a lot easier on users who are currently
told to remove this particular cache file but keep the keys
one, etc, etc.
^C while in manual refresh will cancel the refresh, since that's
often an annoying thing to have to wait for. Also, a manual refresh
command will interrupt any running background refresh and take
over, rather than wait for the background refresh to be done, and
look to be hanging.
The daemon will be polled every 90 seconds for new blocks.
It is enabled by default, and can be turned on/off with
set auto-refresh 1 and set auto-refresh 0 in the wallet.
There are various locale related bugs in various versions of boost,
where exceptions are thrown in boost::filesystem APIs when the
current locale is not to boost's liking. It's not clear what "not
to boost's liking" means in detail, though "en" and "en_US.UTF-8"
are not to its liking.
Fix it by running a test function that's known to throw in such
a case, and resetting LANG and LC_ALL to C if an exception is
thrown. In simplewallet, the locale is queried before that so the
correct translations will still be used.
Default to "simplewallet.log" in current directory when file path isn't
obtained from epee.
In this situation previously, it defaulted to the file name of ".log"
("" + ".log") in the current directory.
(Thanks to @sammy007 for reporting bug.)
An earlier version yet used "" + "/" + ".log" = "/.log", which resulted
in silently not logging in most cases, due to lack of permission.
Test:
PATH=$PATH:</path/to/simplewallet/folder> && simplewallet --wallet-file /dev/null
This results in epee not finding the executable's file path, so
simplewallet will now use a default log filename.
This obsoletes the need for a lengthy blockchain rescan when
a transaction doesn't end up in the chain after being accepted
by the daemon, or any other reason why the wallet's idea of
spent and unspent outputs gets out of sync from the blockchain's.
Pros:
- smaller on the blockchain
- shorter integrated addresses
Cons:
- less sparseness
- less ability to embed actual information
The boolean argument to encrypt payment ids is now gone from the
RPC calls, since the decision is made based on the length of the
payment id passed.
A payment ID may be encrypted using the tx secret key and the
receiver's public view key. The receiver can decrypt it with
the tx public key and the receiver's secret view key.
Using integrated addresses now cause the payment IDs to be
encrypted. Payment IDs used manually are not encrypted by default,
but can be encrypted using the new 'encrypt_payment_id' field
in the transfer and transfer_split RPC calls. It is not possible
to use an encrypted payment ID by specifying a manual simplewallet
transfer/transfer_new command, though this is just a limitation
due to input parsing.
It should avoid a lot of the issues sending more than half the
wallet's contents due to change.
Actual output selection is still random. Changing this would
improve the matching of transaction amounts to output sizes,
but may have non obvious effects on blockchain analysis.
Mapped to the new transfer_new command in simplewallet, and
transfer uses the existing algorithm.
To use in RPC, add "new_algorithm: true" in the transfer_split
JSON command. It is not used in the transfer command.
boost doesn't support %zu for size_t, and the previous change
to %u could technically lose bits (though it would require splitting
a transfer into 4 billion transactions, which seems unlikely).
The new save_watch_only saves a copy of the keys file without the
spend key. It can then be given away to be used as a normal keys
file, but with no spend ability.
Sends all the dust to your own wallet. May fail (if the fee required
is more than the dust total). May end up paying most of the dust in fees.
Unlocked dust total is now also displayed in "balance".
Replace --set_log with --log-level for consistency.
Show default log level in usage.
Add --log-file for specifying log file path.
Document log file path.
Display log file path at startup.
As with display of seed, don't log view key and spend key.
Includes:
- display of viewkey at wallet creation
- "viewkey" command output
- "spendkey" command output
simplewallet run without a wallet path argument should prompt again if
an invalid path was entered.
Validity here currently means the string isn't empty.
simple_wallet::seed()
- Check that wallet is deterministic.
simple_wallet::new_wallet()
- Prompt for seed language only if it's a non-deterministic wallet,
along with previous conditions.
simple_wallet::open_wallet()
- Fixed check for deterministic wallet (flag based on command line
non-deterministic argument was used before, but it's inapplicable to
opening an existing wallet).
- As with deterministic wallet, non-deterministic also included to be
rewritten to new JSON format file. That's what's done for newly
generated non-deterministic wallets, so old versions should be
updated to same format.
3300ae5 remove unused display variable (warptangent)
0e0e557 return true on success (warptangent)
2e11eb1 deterministic wallet use of twelve words fixed (warptangent)
21a3c46 ensure that keccak is called on view spend key, not a possibly pre-sc_reduce32 version of it - for deriving view secret key (warptangent)
f1eaf88 Prints seed after wallet upgrade. Removed iostream include. (Oran Juice)
70971be Doxygen comments (Oran Juice)
031ca23 Rewrites to old wallet file correctly (Oran Juice)
1f833dc Doxygen comments in (Oran Juice)
0bd88ff Writes seed language while generating wallet. Wallet open fix. (Oran Juice)
09a659e Stores seed language in wallet file. added rapidjson. Yet to test backward compatibility (Oran Juice)
Simplewallet should now do a DNS query on an address if it fails to
convert the given string to a binary representation of an address
(base58->binary). It will prompt the user, telling of what the "url"
passed was, what monero address it translated to, and whether or not
DNSSEC validation was a success, and ask for a confirmation that these
are all acceptable.
wallet RPC now uses wallet2::create_transactions and wallet2::commit_tx instead
of wallet2::transfer. This made it possible to add the RPC call /transfer_split, which
will split transactions automatically if they are too large. The old call to
/transfer will return an error stating to use /transfer_split if multiple
transactions are needed to fulfill the request.
