NanoAkron
04da979f46
Always confirm transfers defaults to ON/YES
2016-10-15 20:38:07 +01:00
moneromooo-monero
8231997b66
simplewallet: fix sweep_all misreporting sweeped amount for rct outputs
...
RingCT outputs will be 0 in the vin, so we need to get the actual
amount from elsewhere.
2016-10-15 19:18:52 +01:00
moneromooo-monero
985f61a4ec
wallet: force 0 mixin transactions to use pre-rct txes
...
rct transactions does not support 0 mixin, and those are
now typically dust sweep transactions, for which a lower
fee is a must.
2016-10-15 18:42:04 +01:00
moneromooo-monero
88faec75fe
wallet: select part of the fake outs from recent outputs
...
25% of the outputs are selected from the last 5 days (if possible),
in order to avoid the common case of sending recently received
outputs again. 25% and 5 days are subject to review later, since
it's just a wallet level change.
2016-10-15 18:17:16 +01:00
moneromooo-monero
0950be9e34
wallet: speed up output selection, and fix bug with relatedness calculation
2016-10-15 16:32:08 +01:00
moneromooo-monero
0eba1335be
wallet: fix mixup between mixin 2 and 4 before/after v5
2016-10-15 16:07:18 +01:00
moneromooo-monero
5e10fb042d
rpc: add blockchain cumulative difficulty to getinfo call
2016-10-15 15:00:21 +01:00
moneromooo-monero
094f4c8cc6
rpc: add missing top block hash to json getinfo call
2016-10-15 14:35:29 +01:00
moneromooo-monero
e76dcdd810
wallet: improve error messages when not enough money for transfer
2016-10-15 14:31:40 +01:00
moneromooo-monero
2d7083ca56
wallet_api: fix wrong amount in tx history
2016-10-15 13:56:25 +01:00
moneromooo-monero
b5f20012d3
simplewallet: fix wrong amount in show_transfers
2016-10-15 13:56:09 +01:00
moneromooo-monero
3429bfb71d
ringct: thread verRct and verRctSimple
2016-10-15 13:32:13 +01:00
moneromooo-monero
e06a4daf33
ringct: remove unneeded type conversions
2016-10-15 11:58:39 +01:00
moneromooo-monero
afc70df7ea
ringct: reserve space in vectors to avoid excessive reallocation
2016-10-15 11:58:34 +01:00
moneromooo-monero
9ebf7b6dcf
ringct: avoid unnecessary memcpy
2016-10-15 11:58:29 +01:00
moneromooo-monero
1fe75c1ea7
ringct: add a few consts where possible
2016-10-15 11:58:24 +01:00
moneromooo-monero
ab002a1d97
ringct: pass vectors by const ref where possible
2016-10-15 11:58:18 +01:00
Dion Ahmetaj
a6bc1103fd
patched parameter type bug that was causing failure on 32 bit
2016-10-14 10:37:10 -04:00
AwfulCrawler
9c73128835
Change default dust threshold to equal fee per kb
2016-10-12 14:04:26 +13:00
Riccardo Spagni
34fcfcd7cc
Merge pull request #1203
...
4038e8674dfdb0
2016-10-11 10:31:26 +02:00
Riccardo Spagni
3db0ebafe5
Merge pull request #1204
...
7db29d6dd6c443e95d3f3412da63
2016-10-11 10:30:53 +02:00
Dion Ahmetaj
7db29d6903
print_coinbase_tx_sum now breaks output into fee and emission components
2016-10-10 19:55:18 -04:00
Dion Ahmetaj
dd6c44327b
changed params from start/end index to height/count
2016-10-10 17:19:36 -04:00
Dion Ahmetaj
e95d3f359b
attempted to remove whitespace spam
2016-10-10 16:41:24 -04:00
moneromooo-monero
4038e86527
Add performance timers for ringct tx verification
2016-10-10 21:24:21 +01:00
moneromooo-monero
74dfdb0b30
perf_timer: new class and macros to make performance logs easier
...
Call PERF_TIMER(name), which is scoped.
2016-10-10 21:24:15 +01:00
Dion Ahmetaj
412da63622
added print_coinbase_tx_sum option
2016-10-10 15:45:51 -04:00
Jacob Brydolf
a8cd65646c
Wallet API: added setRecoveringFromSeed();
2016-10-10 19:37:10 +02:00
Riccardo Spagni
0673db16ad
Merge pull request #1195
...
697ce1dbb9094f62b370811fab41559f3798b0cb8cdb3282c85f5e73
2016-10-09 14:34:59 +02:00
Riccardo Spagni
fe43461c2b
Merge pull request #1194
...
3126ba7d8eae673cb24361eaa3e8
2016-10-09 14:34:38 +02:00
Riccardo Spagni
8cd01bc378
Merge pull request #1192
...
36a89ab
2016-10-09 14:33:17 +02:00
Riccardo Spagni
0589209eb4
Merge pull request #1191
...
9f31e2d
2016-10-09 14:29:16 +02:00
moneromooo-monero
3126ba7425
ringct: use const refs as parameters where appropriate
2016-10-08 22:16:23 +01:00
moneromooo-monero
3cb2436528
core: remove some unused code
2016-10-08 19:35:40 +01:00
Jacob Brydolf
36a89ab435
libwallet_api: Added option to restore from specific height
2016-10-08 00:57:09 +02:00
Riccardo Spagni
b9c8c0db06
Merge pull request #1121
...
4e6d708
2016-10-07 21:01:16 +02:00
moneromooo-monero
9f31e2d8c0
wallet: do not announce pool txes as money spent/received (yet)
2016-10-07 19:52:05 +01:00
Ilya Kitaev
697ce1d435
libwallet_api: reverted deleted curly brace
2016-10-07 00:43:45 +03:00
Ilya Kitaev
a4390dae07
resolved conflict with 'develop' of https://github.com/mbg033/monero
2016-10-07 00:36:36 +03:00
Ilya Kitaev
62b3708ea5
libwallet_api: do not signal on sent/received tx until wallet completely
...
synchronized
2016-10-07 00:29:13 +03:00
Ilya Kitaev
11fab41c36
libwallet_api: TransactionHistory: read/write syncchronization
2016-10-06 23:25:43 +03:00
Ilya Kitaev
8b0cb8caa4
libwallet_api: some renamings
2016-10-06 15:47:29 +03:00
Ilya Kitaev
db3282cdf0
Initialize transaction history if empty
2016-10-06 15:47:29 +03:00
Ilya Kitaev
85f5e73d9c
libwallet_api: fixes for transaction history
2016-10-06 15:47:29 +03:00
Ilya Kitaev
bb9094f1fe
libwallet_api: fixes for transaction history
2016-10-04 23:11:19 +03:00
moneromooo-monero
4e6d70808d
wallet: better implementation of sweep_unmixable
...
This was still using the old transaction creation algorithm,
coupled with a deterministic output selection scheme, which
made it ill suited to the job, since it'd loop indefinitely
in case the fee increased between the test tx and adding the
fee.
2016-10-04 17:44:56 +01:00
moneromooo-monero
2a0ad8b2fe
simplewallet: add mixin and payment id to sweep_all help
2016-10-04 17:44:30 +01:00
Jacob Brydolf
79bb5a670a
Fix build after spelling corrections in core_rpc_server
2016-10-04 13:55:55 +02:00
Riccardo Spagni
ae987907c6
Merge pull request #1179
...
714ee9971538f368ac0607d020bdd5f918a3451963e5e6d889b8a062
2016-10-04 12:18:55 +02:00
Riccardo Spagni
a8e03344e5
Merge pull request #1177
...
3644aa9
2016-10-04 12:17:28 +02:00
Riccardo Spagni
2723cd12e1
Merge pull request #1173
...
65ea836
2016-10-04 12:15:02 +02:00
Riccardo Spagni
e72b6a7ade
Merge pull request #1165
...
e57379a
2016-10-04 12:14:41 +02:00
Riccardo Spagni
ab60c0503c
Merge pull request #1164
...
179b1f4
2016-10-04 12:14:12 +02:00
Riccardo Spagni
bfdac4b5ff
Merge pull request #1160
...
80b4da3
2016-10-04 12:11:32 +02:00
Riccardo Spagni
4cb1348548
Merge pull request #1139
...
01ec195446ebbcbd773e73627cea2a5139678b13d61e6aedb9e54616
2016-10-04 12:11:03 +02:00
Riccardo Spagni
d60826c0b9
Merge pull request #1133
...
cec090f
2016-10-04 12:08:33 +02:00
Riccardo Spagni
60e527f1c2
Merge pull request #1125
...
7b09e9f
2016-10-04 12:06:04 +02:00
Riccardo Spagni
895d20f901
Merge pull request #1123
...
0d036be
2016-10-04 12:05:11 +02:00
Oyvind Kvanes
714ee99678
Fix description for locked_transfer
2016-10-04 11:46:44 +02:00
Riccardo Spagni
e34ef4de6c
Merge pull request #1171
...
6390673
2016-10-04 11:41:41 +02:00
Riccardo Spagni
fa1d5efb5a
Merge pull request #1168
...
10be903fb1785a8ed0d72442bfd1
2016-10-04 11:41:13 +02:00
Riccardo Spagni
36d80b4475
Merge pull request #1162
...
e5f8642ea45d61
2016-10-04 11:38:35 +02:00
Riccardo Spagni
db90a16f03
Merge pull request #1152
...
8b20cbf10fe6260019e311f73f804789347
2016-10-04 11:37:18 +02:00
Riccardo Spagni
298a0723e8
Merge pull request #1149
...
25be1d3
2016-10-04 11:34:53 +02:00
Riccardo Spagni
8a67e3c95e
Merge pull request #1145
...
8438fb4
2016-10-04 11:29:46 +02:00
Riccardo Spagni
2ef81914b5
Merge pull request #1140
...
bba6af99872dcbd9b0bf998f19d4
2016-10-04 11:27:38 +02:00
Oyvind Kvanes
71538f3240
Rename to lockblocks and add max value
2016-10-04 11:13:26 +02:00
NanoAkron
10be9036da
Brackets to prevent premature return
2016-10-04 01:13:04 +01:00
NanoAkron
fb1785ab94
Brackets to ensure doesn't function prematurely return
2016-10-04 01:10:12 +01:00
moneromooo-monero
3644aa94f3
blockchain: avoid using a reference to a temporary
2016-10-03 23:20:50 +01:00
NanoAkron
8ed0d72b12
Moved logging to target functions rather than caller
2016-10-03 22:11:00 +01:00
Jacob Brydolf
65ea8364f8
wallet2_api: added Wallet::daemonBlockChainTargetHeight()
...
libwallet_api: Wallet::blockChainTargetHeight
Signed-off-by: Jacob Brydolf <jacob@brydolf.net>
2016-10-03 20:47:41 +02:00
NanoAkron
6390673137
Removed all code related to fast_exit
2016-10-03 02:06:55 +01:00
NanoAkron
442bfd1600
Added messages at log level 2 to reflect deactivation procedure
2016-10-02 23:00:41 +01:00
moneromooo-monero
e57379a819
p2p: drop any existing connection to a banned IP
2016-10-02 19:23:35 +01:00
moneromooo-monero
179b1f43af
daemon: implement missing print_bc and matching RPC
2016-10-02 10:21:21 +01:00
TedTheFicus
ea45d61f5d
Update minimum mixin in transfer_original help text
...
Changed the wording from "from 0 to maximum available" to "from 2 to maximum available".
May I also suggest putting in a number rather than "maximum available" and also clarifying that mixin = 0 is still allowed if the user has unmixable outputs (dust), which he wants to "undust" using sweep_unmixable (comment from dEBRUYNE-1 ).
2016-10-01 12:55:54 -06:00
Ilya Kitaev
8b20cbfa7d
libwallet_api: do not use fast-refresh on recovery
2016-10-01 21:04:49 +03:00
moneromooo-monero
80b4da3330
wallet: wallet option to confirm transfers with no payment id
...
set confirm-missing-payment-id 0|1
Defaults to true.
2016-10-01 17:03:53 +01:00
Ilya Kitaev
10fe626e13
libwallet_api: fast-refresh in case of opening non-synced wallet
2016-09-30 22:42:15 +03:00
Ilya Kitaev
0019e3106b
libwallet_api: fix unhandled exception on address check
2016-09-30 21:43:57 +03:00
Ilya Kitaev
1f73f80c94
libwallet_api: fast-refresh for new wallet
2016-09-30 02:11:28 +03:00
Riccardo Spagni
8f94fcf6a3
Merge pull request #1124
...
8b4e7c6
2016-09-29 22:17:51 +02:00
Riccardo Spagni
995dde4f95
Merge pull request #1128
...
d2e11f3
2016-09-29 22:16:15 +02:00
Riccardo Spagni
af831bed5c
Merge pull request #1129
...
5e3e362
2016-09-29 22:15:21 +02:00
NanoAkron
25be1d3ed4
Noticed two spellings of the word 'response' in the codebase, one 'responce' and the other 'response'.
...
Fixed to the standard spelling 'response'. This may fix some functionality - some calls had mixed spellings.
2016-09-29 14:38:12 +01:00
Oyvind Kvanes
68ac0607da
Fix locked_transfer
2016-09-28 16:44:43 +02:00
Oyvind Kvanes
7d020bde5e
Add locked_transfer
2016-09-28 16:27:45 +02:00
Oyvind Kvanes
d5f918a0b1
Revert transfer_main in simplewallet
2016-09-28 15:20:37 +02:00
Oyvind Kvanes
3451963855
Add motifications to test out locked_transfer
2016-09-28 14:58:14 +02:00
Oyvind Kvanes
e5e6d88655
Add more information to transaction in wallet
2016-09-28 13:04:26 +02:00
Oyvind Kvanes
9b8a06203b
Make a small test change
2016-09-28 11:01:20 +02:00
NanoAkron
8438fb4ae3
Improving daemon startup log message
2016-09-28 01:47:45 +01:00
Ilya Kitaev
2dacb193d0
wallet2: wallet2::get_daemon_blockchain_height() clean error message on
...
success
2016-09-28 00:39:06 +03:00
Ilya Kitaev
25e5efc238
libwallet_api: Wallet::setAutoRefreshInterval sanity check
2016-09-28 00:35:10 +03:00
Ilya Kitaev
a6688200fb
libwallet_api: explicitly return 0 in Wallet::daemonBlockChainHeight()
...
on error
2016-09-28 00:31:21 +03:00
moneromooo-monero
bba6af9064
wallet: cold wallet transaction signing
...
This change adds the ability to create a new unsigned transaction
from a watch only wallet, and save it to a file. This file can
then be moved to another computer/VM where a cold wallet may load
it, sign it, and save it. That cold wallet does not need to have
a blockchain nor daemon. The signed transaction file can then be
moved back to the watch only wallet, which can load it and send
it to the daemon.
Two new simplewallet commands to use it:
sign_transfer (on the cold wallet)
submit_transfer (on the watch only wallet)
The transfer command used on a watch only wallet now writes an
unsigned transaction set in a file called 'unsigned_monero_tx'
instead of submitting the tx to the daemon as a normal wallet does.
The signed tx file is called 'signed_monero_tx'.
2016-09-27 07:46:39 +01:00
codehalo
01ec1959c3
Update CMakeLists.txt
2016-09-27 02:11:23 -04:00
codehalo
446ebbcd7b
Update CMakeLists.txt
2016-09-27 02:11:04 -04:00
codehalo
bd773e7805
Update CMakeLists.txt
2016-09-27 02:10:30 -04:00
moneromooo-monero
9872dcbbe3
wallet: fix log confusion between bytes and kilobytes
2016-09-26 23:12:43 +01:00
moneromooo-monero
d9b0bf9f35
cryptonote_core: make extra field removal more generic
2016-09-26 23:12:38 +01:00
moneromooo-monero
98f19d40aa
serialization: add support for serializing std::pair and std::list
2016-09-26 23:12:28 +01:00
Randi Joseph
cfd71e6bde
Cleanup. Dropped "bit" from bitmonero.
2016-09-26 17:47:57 -04:00
Randi Joseph
78b13d6dac
Cleanup. Dropped "bit" from bitmonero.
2016-09-26 17:35:10 -04:00
Randi Joseph
1e6aedba8b
Cleanup. Dropped "bit" from bitmonero.
2016-09-26 17:22:30 -04:00
Randi Joseph
9e54616924
Dropped "bit" from bitmonero.
2016-09-26 17:22:30 -04:00
Randi Joseph
3627cea34a
Cleanup. Dropped "bit" from bitmonero.
2016-09-26 16:47:07 -04:00
Ilya Kitaev
cda4cb969a
formatting: 2-spaces indentation
2016-09-26 23:46:07 +03:00
Ilya Kitaev
545a48f098
formatting: 2-spaces indentation
2016-09-26 23:29:53 +03:00
Ilya Kitaev
3079c5756b
wallet2_api: milliseconds resolution for auto-refresh interval
2016-09-26 23:19:25 +03:00
Ilya Kitaev
7b4a85b309
wallet2_api: added Wallet::daemonBlockChainHeight()
2016-09-26 23:19:25 +03:00
Ilya Kitaev
9de3ec3e2a
libwallet_api: Wallet::blockChainHeight, WalletListener::newBlock
2016-09-26 23:19:25 +03:00
Riccardo Spagni
e01a9ea507
Merge pull request #1117
...
fc855c1
2016-09-26 17:34:26 +02:00
Riccardo Spagni
cf74a137f3
Merge pull request #1116
...
2e18e1069c98241f8a70cd5d0856cdb6c96
2016-09-26 17:34:06 +02:00
Riccardo Spagni
90f818b646
Merge pull request #1113
...
12427dd
2016-09-26 17:33:08 +02:00
Randi Joseph
2a5139644a
Dropped "bit" from bitmonero.
2016-09-26 10:42:29 -04:00
moneromooo-monero
cec090fc8a
Revert "Fix fake 'network synchronized, begin using' messages"
...
This reverts commit 78035d2b6c
2016-09-25 19:08:35 +01:00
moneromooo-monero
5e3e362c85
core: make the sync chunk block count overridable
2016-09-24 17:00:19 +01:00
moneromooo-monero
d2e11f374a
db_lmdb: do not error if dropping a non existent hard fork table
2016-09-24 16:15:50 +01:00
moneromooo-monero
7b09e9ff77
wallet: update min mixin for sweep_unmixable on v4
2016-09-24 14:48:34 +01:00
moneromooo-monero
8b4e7c6c9c
daemon: report status at 99.9% rather than 100% when not quite synced
...
Less confusing for users.
2016-09-24 11:45:19 +01:00
moneromooo-monero
0d036bec26
blockchain: do not reject chain histories matching only genesis
...
This is fine if our local chain is so small that it is entirely
contained within the last jump in the peer's short chain history.
2016-09-24 11:19:00 +01:00
Will Skinner
fc855c1a21
Made error message consistent with other, more helpful, message
2016-09-22 21:06:39 -07:00
Myagui
12427dd8d3
Fix minor typo in "need resize" message.
...
Message observed while synchronizing a node from scratch.
"LMDB memory map needs resized"
Proposing a change to:
"LMDB memory map needs to be resized"
2016-09-21 20:40:07 +01:00
Ilya Kitaev
d5d0856ce6
wallet2_api: getter and setter for "refresh interval"
2016-09-20 20:40:58 +03:00
Ilya Kitaev
cdb6c96f89
wallet2_api: fixed deadlock while closing wallet
2016-09-20 20:08:33 +03:00
J Ryan Littlefield
7f009bb7e2
Remove redundant "default" in set mixin help desc
2016-09-19 16:09:31 -06:00
Riccardo Spagni
53e18cafdf
Merge pull request #1102
...
eeb2bbc
2016-09-18 21:38:46 +02:00
Riccardo Spagni
5866d91b82
Merge pull request #1101
...
56ff099
2016-09-18 21:38:21 +02:00
moneromooo-monero
eeb2bbc0fc
epee: optionally restrict HTTP service to a configurable user agent
...
This is intended to catch traffic coming from a web browser,
so we avoid issues with a web page sending a transfer RPC to
the wallet. Requiring a particular user agent can act as a
simple password scheme, while we wait for 0MQ and proper
authentication to be merged.
2016-09-18 20:32:02 +01:00
Riccardo Spagni
56ff099956
fixed tag detector
2016-09-18 21:21:13 +02:00
Riccardo Spagni
68e6678ab7
Merge pull request #1099
...
c2faab570bd7d8cebbcf0eb60fa2c41098ac69b8a1f148af2c15da0e8a274ea
2016-09-18 20:26:39 +02:00
Riccardo Spagni
c2faab5e1a
fix v5 height
2016-09-18 20:13:47 +02:00
Riccardo Spagni
70bd7d8871
remove dead backup seed nodes, add new ones
2016-09-18 20:10:46 +02:00
Riccardo Spagni
cebbcf0f64
fix v5 fork date description
2016-09-18 19:35:36 +02:00
Riccardo Spagni
eb60fa2cff
update version
2016-09-18 19:20:29 +02:00
Riccardo Spagni
c41098aacf
updated fork heights for v4 and v5
2016-09-18 19:18:16 +02:00
Riccardo Spagni
c69b8a188b
update block headers
2016-09-18 19:05:47 +02:00
Riccardo Spagni
f148af235a
add checkpoints
2016-09-18 18:40:43 +02:00
Riccardo Spagni
6b744c349f
Merge pull request #1098
...
1dd5b0b
2016-09-18 17:42:32 +02:00
Riccardo Spagni
a6914c140c
Merge pull request #1097
...
5f5d727
2016-09-18 17:42:10 +02:00
Riccardo Spagni
8a274eab3f
switch wallet API from std thread/mutex to boost
2016-09-18 17:37:47 +02:00
moneromooo-monero
1dd5b0b7df
wallet: keep change dest separate from other dests
...
This fixes misreporting of amount/fee in rct txes, as the rct
tx construction code was lumping all dests (whether change or
not) in the same dests vector, while the pre-rct code was
keeping it separate.
2016-09-18 12:04:23 +01:00
moneromooo-monero
5f5d7279b6
wallet: fix empty tx in corner case sending nothing
2016-09-18 10:44:32 +01:00
Riccardo Spagni
4a03a8a1da
Merge pull request #1094
...
06bb692e1c7af354010b9
2016-09-18 11:44:08 +02:00
Riccardo Spagni
14f88f6b98
Merge pull request #1093
...
e86c5b9
2016-09-18 11:40:52 +02:00
Riccardo Spagni
35cdbe2eb2
Merge pull request #1089
...
368485d
2016-09-18 11:36:30 +02:00
moneromooo-monero
e86c5b9b53
miner: do not try to save config if the path isn't set
...
This saves on an exception dump when trying to write to /
after finding a block.
2016-09-18 09:57:42 +01:00
redfish
06bb6923c3
cmake: support BUILD_SHARED_LIBS built-in option
...
Support building internal libraries as shared. This reduces
development time by eliminating the need to re-link all
binaries every time non-interface code in the library changes.
Instead, can hack on libxyz, then `make libxyz`, and re-run
monerod.
By default BUILD_SHARED_LIBS is OFF in release build type,
and ON in debug build type, but can be overriden with -D.
2016-09-18 02:56:26 -04:00
redfish
e1c7af35d4
cmake: transitive deps and remove deprecated LINK_*
...
Keep the immediate direct deps at the library that depends on them,
declare deps as PUBLIC so that targets that link against that library
get the library's deps as transitive deps.
Break dep cycle between blockchain_db <-> crytonote_core.
No code refactoring, just hide cycle from cmake so that
it doesn't complain (cycles are allowed only between
static libs, not shared libs).
This is in preparation for supproting BUILD_SHARED_LIBS cmake
built-in option for building internal libs as shared.
2016-09-18 02:56:26 -04:00
redfish
54010b97b4
crypto: armv7: slow-hash: remove redundant source include
...
aesb.c is already present in libcrypto as a standalone object.
Tested: builds and runs fine on armv7, static and dynamic.
2016-09-18 02:56:26 -04:00
moneromooo-monero
368485d518
simplewallet: do not expose the details of tx splitting to the user
...
They're confusing, as people think it reports their balance.
2016-09-17 22:23:03 +01:00
moneromooo-monero
925086346a
simplewallet: fix wrong amount in show_transfers for pending transactions
...
Change was not taken into consideration
2016-09-17 17:18:24 +01:00
Riccardo Spagni
a1e6fb8243
Merge pull request #1080
...
423776f
2016-09-17 07:48:46 +02:00
moneromooo-monero
423776f9b1
daemon: log version when starting
...
Helps with investigating bug reports
2016-09-16 20:47:52 +01:00
moneromooo-monero
9c7b0cb28e
wallet: change priority/fee to ArticMine's recommendation
...
We keep 1, 2, 3 multipliers till the fee decrase from 0.01/kB
to 0.002/kB, where we start using 1, 20, 166 multipliers.
This ensures the higher multiplier will compensate for the
block reward penalty when pushing past 100% of the past median.
The fee-multiplier wallet setting is now rename to priority,
since it keeps its [0..3] range, but maps to different multiplier
values.
2016-09-16 11:50:52 +01:00
Riccardo Spagni
e06530e2d9
Merge pull request #1077
...
69b5918
2016-09-16 08:42:59 +02:00
Howard Chu
69b59186f3
Add ARMv8-A AES support
...
More than twice as fast as plain C code. Note that both ARMv7 and
ARMv8 can be further improved with better use of NEON.
Also tweak ARMv7 multiplier
2016-09-16 01:45:49 +01:00
rckngOpossum
e29e8b1b99
compile errors fixed when PER_BLOCK_CHECKPOINT not defined
2016-09-15 15:55:07 -05:00
rckngOpossum
e49c161987
compile errors fixed when DEBUG_CREATE_BLOCK_TEMPLATE defined
2016-09-15 15:36:16 -05:00
Riccardo Spagni
7c899ec33a
Merge pull request #1074
...
cd01bae
2016-09-15 15:23:49 +02:00
Riccardo Spagni
d4a533a800
Merge pull request #1068
...
a5af33d823843e0a56d83
2016-09-15 15:20:38 +02:00
Riccardo Spagni
ce53674520
Merge pull request #1067
...
70b78bb7d413f60ce79ef
2016-09-15 15:19:54 +02:00
moneromooo-monero
cd01bae735
Decrease minimum fee from 0.01/kB to 0.002/kB
...
The wallet will start using that fee about two weeks after hard
fork 3, when most people will likely have updated their daemons.
2016-09-15 09:28:33 +01:00
moneromooo-monero
70b78bb2c8
wallet: fix misdetection of duplicates
2016-09-14 20:23:28 +01:00
moneromooo-monero
7d413f635f
rct: rework serialization to avoid storing vector sizes
2016-09-14 20:23:06 +01:00
moneromooo-monero
0ce79ef10e
core: cleanup some typecasting
2016-09-14 20:22:16 +01:00
Casey Marshall
0a56d83d3d
Add snap packaging.
...
This adds [snap](https://snapcraft.io ) packaging to the project. See the
link for more information on snaps. Snap packages install on all Linux
distributions. On Ubuntu, snap confinement with apparmor and seccomp
provide an additional layer of security.
This snap sets up monerod as a systemd service, which should start
immediately on install. To access the wallet CLI, simply run `monero`
(/snap/bin/monero). I think it's a really quick & easy way to get
started with monero.
I've made some opinionated decisions in the packaging just to kick this
off, but I'm happy to iterate on this stuff.
2016-09-11 11:17:12 -05:00
iDunk5400
f1381388ec
Daemon: fix hashrate display in diff command output
2016-09-10 23:16:25 +02:00
Riccardo Spagni
391d6d0cf8
Merge pull request #1049
...
24d9337
2016-09-10 15:13:33 +02:00
Riccardo Spagni
94df1f4d84
Merge pull request #1044
...
b1d5189
2016-09-10 15:10:43 +02:00
redfish
24d93370ad
crypto,cmake: enable ASM mul impl on ARM; add cmake opt
...
This was disabled earlier as part of diagnosing failing tests
on ARM, which turned out to be due to aliasing, fixed by
adding -fno-strict-aliasing. So, re-enabling it back.
2016-09-04 06:46:35 +00:00
redfish
b1d5189ae1
cmake: fix def propagation, fixes 32-bit build
...
32-bit build would fail to link with 'mdb_env_create undefined' (because
for 32-bit build, mdb_env_create_vl32 is defined instead).
This bug was introduced with the recent change to virtual object
libraries. The problem is that the COMPILE_DEFINITIONS property
was not propagated from dependee target (lmdb) to depedent
target's (blockchain_db) virtual object lib (obj_blockchain_db).
This patch makes that happen.
I chose to include INTERFACE_COMPILE_DEFINITIONS because there
should not be a need to propagate private defs, but it doesn't
make a difference in this case.
2016-09-03 17:44:28 -04:00
Riccardo Spagni
011e42f337
fix nigglies, as pointed out by moneromooo-monero
2016-09-03 22:36:09 +02:00
Riccardo Spagni
df63e0704a
fix remaining bitmonero and simplewallet bits
2016-09-03 22:03:44 +02:00
Riccardo Spagni
04b120fb39
fix blockchain utilities readme
2016-09-03 21:54:10 +02:00
Riccardo Spagni
c45912e1df
Merge pull request #1039
...
883d6517825386face5732e984bcb6973b8f968ccb7a38e4e
2016-09-03 19:59:41 +02:00
Riccardo Spagni
aa996e3a60
Merge pull request #1038
...
43677f9
2016-09-03 14:11:26 +02:00
Riccardo Spagni
883d651c3b
remove blockchain_dump
2016-09-03 14:07:17 +02:00
Riccardo Spagni
7825386468
fix leftover add_directory
2016-09-03 13:51:07 +02:00
Riccardo Spagni
face57309b
rename simplewallet
2016-09-03 13:48:38 +02:00
Riccardo Spagni
2e984bc23c
rename Monero daemon
2016-09-03 13:46:41 +02:00
Riccardo Spagni
b6973b8053
rename blockchain utils
2016-09-03 13:45:18 +02:00
Riccardo Spagni
f968ccb9d3
remove cn_deserialize
2016-09-03 13:20:53 +02:00
Riccardo Spagni
7a38e4e65d
removed simpleminer
2016-09-03 13:20:00 +02:00
Ilya Kitaev
43677f9d68
gui/libwallet_merged: libunbound is one more dependency
2016-09-03 13:32:06 +03:00
Riccardo Spagni
6c608c352c
Merge pull request #1033
...
4d17949
2016-09-01 23:00:21 +02:00
Ilya Kitaev
4d17949d4f
wallet_merged: ringct added to dependencies
2016-09-01 23:06:36 +03:00
luigi1111
34bb78956f
Re-add s to rangesigs
...
Whoops.
2016-09-01 13:53:53 -05:00
luigi1111
dbf017a5f7
Fix some rct tx size calculations
...
Some variance is still expected
2016-09-01 13:14:31 -05:00
Riccardo Spagni
c09daf2d40
Merge pull request #1029
...
f1d87c8f4e894a
2016-09-01 17:11:49 +02:00
moneromooo-monero
f1d87c8064
simplewallet: add magic and public keys to key image export file
...
This ensures it's hard to mix files up
2016-09-01 11:32:44 +01:00
moneromooo-monero
f4e894a526
simplewallet: make the key image export format binary
...
Saves on space, and on some pointless hex conversions
2016-09-01 11:04:53 +01:00
Riccardo Spagni
e0d78858e4
Merge pull request #1022
...
b8c03a5
2016-09-01 11:32:27 +02:00
Riccardo Spagni
27c8713f56
Merge pull request #1027
...
85dc0ce
2016-09-01 11:31:58 +02:00
Riccardo Spagni
badd77068b
Merge pull request #1021
...
1d5ba65
2016-09-01 11:29:57 +02:00
Riccardo Spagni
d3994f1df0
Merge pull request #1018
...
6cf8ca2
2016-09-01 11:29:22 +02:00
Riccardo Spagni
e858c4c745
Merge pull request #1016
...
3112e24
2016-09-01 11:28:29 +02:00
Riccardo Spagni
e33e74a69b
Merge pull request #1012
...
c2941cb
2016-09-01 11:26:58 +02:00
Riccardo Spagni
9b579773d7
Merge pull request #1007
...
1de812aa7498ad
2016-09-01 11:21:38 +02:00
moneromooo-monero
85dc0ce3a5
wallet: sanity check on histogram response
2016-09-01 09:04:45 +01:00
moneromooo-monero
6cf8ca2a7f
core: faster find_blockchain_supplement
...
Since this queries block heights for blocks that may or may not
exist, queries for non existing blocks would throw an exception,
and that would slow down the loop a lot. 7 seconds to go through
a 30 hash list.
Fix this by adding an optional return block height to block_exists
and using this instead. Actual errors will still throw an
exception.
This also cuts down on log exception spam.
2016-08-31 10:03:32 +01:00
redfish
1de812a92a
cmake: merge libs via virtual object libraries
...
CMake issued a warming about policy CMP0026: access of LOCATION
target property at config time was disallowed. Offending code
was the code that merged static libraries to generate
libwallet_merged.a.
This patch does that same merge task in a much simpler way. And,
since it doesn't violate the policy, the warning went away.
2016-08-30 23:01:48 -04:00
Howard Chu
b8c03a5f10
Remove blocks_per_sync limits
...
The code used to cap at 5000 blocks per sync. It also treated 0 as 1.
Remove these checks; if specified as 0 do no periodic syncs at all.
Then the user is responsible for syncing in some external process.
2016-08-31 00:00:19 +01:00
Quanah Gibson-Mount
1d5ba65f3d
Fix incorrect help usage for the threads option to start_mining
2016-08-30 14:59:28 -07:00
tobiasw2
c2941cb30a
Show correct amount of days behind/ahead while syncing
2016-08-30 23:50:45 +02:00
moneromooo-monero
3112e24aa7
wallet: interpret 0 fee multiplier as default for sweep_all too
2016-08-30 13:19:20 +01:00
Riccardo Spagni
c3ba844f03
Merge pull request #1014
...
1cdba42
2016-08-30 00:10:06 +02:00
moneromooo-monero
1cdba42a77
db_lmdb: fix reorg with "halfway rct" coinbase outputs
2016-08-29 22:44:17 +01:00
moneromooo-monero
73b9b4ba34
wallet: fix not finding enough rct fake outputs
...
If picking coinbase outputs, those are locked for a longer time
than other outputs, so we ask for more of those
2016-08-29 20:51:21 +01:00
Howard Chu
5bba2fdbb0
More for PR#999
2016-08-29 15:58:56 +01:00
moneromooo-monero
adca903589
wallet_rpc_server: return payment id in make_integrated_address RPC
...
It is useful, especially when requesting a random one
2016-08-29 12:18:22 +01:00
Riccardo Spagni
c915bffa51
Merge pull request #1002
...
91ca0b4
2016-08-29 10:42:14 +02:00
moneromooo-monero
91ca0b4065
core: allow empty global indices for txes with empty vout
2016-08-29 09:28:32 +01:00
Riccardo Spagni
f5b802e684
Merge pull request #999
...
dc411ea
2016-08-28 22:50:18 +02:00
moneromooo-monero
887db9f936
blockchain: testnet heights for v3, v4, and v5
2016-08-28 21:30:54 +01:00
moneromooo-monero
f24ab58d18
ringct: remove unused code
2016-08-28 21:30:53 +01:00
moneromooo-monero
b38452bd55
ringct: pass structure by const ref, not value
2016-08-28 21:30:51 +01:00
moneromooo-monero
fd11271eea
ringct: use memcpy/memset instead of handwritten loop where appropriate
2016-08-28 21:30:49 +01:00
moneromooo-monero
5d38206fcc
ringct: remove spurious copies
2016-08-28 21:30:47 +01:00
moneromooo-monero
16732a85d7
rct: faster Cryptonote/rct conversions
2016-08-28 21:30:45 +01:00
moneromooo-monero
fbd7c359ee
wallet: fix some "may be used uninitialized" warnings
...
The compiler can't always work out the _found booleans are
set iff the value is initialized.
2016-08-28 21:30:44 +01:00
moneromooo-monero
4a41dd4068
wallet: do not generate 0 change
2016-08-28 21:30:42 +01:00
moneromooo-monero
a0925e628e
core: use full rct signatures if just one input
...
It is slightly smaller, but requires all rings to have the real
input on the same index, so can only be used for single input txes.
2016-08-28 21:30:40 +01:00
moneromooo-monero
94fd881f74
rct: early out on failure on verRange
2016-08-28 21:30:38 +01:00
moneromooo-monero
45349b6f7c
wallet: do not ask for duplicate histograms
2016-08-28 21:30:36 +01:00
moneromooo-monero
b951bc8780
wallet: transfer_selected_rct now also selects fake outs
2016-08-28 21:30:34 +01:00
moneromooo-monero
4f887dea6e
increase minimum mixin to 4 on hard fork 5
2016-08-28 21:30:33 +01:00
moneromooo-monero
0815c72df7
core: allow v1 txes after HF 5 when sweeping unmixable outputs
2016-08-28 21:30:31 +01:00
moneromooo-monero
074e602609
ringct: use Cryptonote serialization to hash non prunable data
2016-08-28 21:30:28 +01:00
moneromooo-monero
c3b3260ae5
New "Halfway RingCT" outputs for coinbase transactions
...
When RingCT is enabled, outputs from coinbase transactions
are created as a single output, and stored as RingCT output,
with a fake mask. Their amount is not hidden on the blockchain
itself, but they are then able to be used as fake inputs in
a RingCT ring. Since the output amounts are hidden, their
"dustiness" is not an obstacle anymore to mixing, and this
makes the coinbase transactions a lot smaller, as well as
helping the TXO set to grow more slowly.
Also add a new "Null" type of rct signature, which decreases
the size required when no signatures are to be stored, as
in a coinbase tx.
2016-08-28 21:30:26 +01:00
moneromooo-monero
6f526cdff8
rct: log why verification fails
...
and remove some unnecessary variables in the checking code
2016-08-28 21:30:23 +01:00
moneromooo-monero
d4b8991e44
rct: serialize txnFee as varint
2016-08-28 21:30:21 +01:00
moneromooo-monero
d4b62a1e29
rct amount key modified as per luigi1111's recommendations
...
This allows the key to be not the same for two outputs sent to
the same address (eg, if you pay yourself, and also get change
back). Also remove the key amounts lists and return parameters
since we don't actually generate random ones, so we don't need
to save them as we can recalculate them when needed if we have
the correct keys.
2016-08-28 21:30:19 +01:00
moneromooo-monero
93f5c625f0
rct: rework v2 txes into prunable and non prunable data
...
Nothing is pruned, but this allows easier changes later.
2016-08-28 21:30:18 +01:00
moneromooo-monero
d93746b6d3
rct: rework the verification preparation process
...
The whole rct data apart from the MLSAGs is now included in
the signed message, to avoid malleability issues.
Instead of passing the data that's not serialized as extra
parameters to the verification API, the transaction is modified
to fill all that information. This means the transaction can
not be const anymore, but it cleaner in other ways.
2016-08-28 21:30:16 +01:00
moneromooo-monero
3ab2ab3e76
rct: change the simple flag to a type
...
for future expansion
2016-08-28 21:30:14 +01:00
Shen Noether
c5be4b0bea
rct: avoid the need for the last II element
...
This element is used in the generation of the MLSAG, but isn't
needed in verification.
Also misc changes in the cryptonote code to match, by mooo.
2016-08-28 21:30:12 +01:00
moneromooo-monero
a47ceee83b
wallet: do not store signatures in the wallet cache
...
Saves some substantial space.
Also avoid calculating tx hashes we don't need.
2016-08-28 21:30:10 +01:00
moneromooo-monero
0263dd2d23
core: add some locking around pool use
2016-08-28 21:30:08 +01:00
moneromooo-monero
2c9d9519f1
wallet2: factor m_spent changes
...
Makes it easier to track what is going on.
2016-08-28 21:30:04 +01:00
moneromooo-monero
1303cda646
wallet: always use new algorithm for RPC transfers
...
This ensures we get rct transactions when appropriate
2016-08-28 21:30:03 +01:00
moneromooo-monero
b337aea6cc
rct: do not serialize senderPk - it is not used anymore
2016-08-28 21:30:01 +01:00
moneromooo-monero
230fca2d56
wallet: use the prefered rct case only when enough rct outs exist
2016-08-28 21:29:55 +01:00
moneromooo-monero
c27194a444
wallet: do not try to use rct txes a few blocks before the fork
2016-08-28 21:29:53 +01:00
moneromooo-monero
1bf069825b
tx_pool: log why a transaction was rejected for version checks
2016-08-28 21:29:51 +01:00
moneromooo-monero
37bdf6ebe3
change fork settings to allow pre-rct txes for one more fork cycle
2016-08-28 21:29:50 +01:00
moneromooo-monero
cc85cc6a3f
simplewallet: better check_tx_key feedback
...
Print number of confirmations if the tx is in the blockchain,
or a warning if it's in the pool.
2016-08-28 21:29:48 +01:00
moneromooo-monero
9b70856ccb
rct: make the amount key derivable by a third party with the tx key
...
Scheme design from luigi1114.
2016-08-28 21:29:46 +01:00
moneromooo-monero
cf33e1a52a
rct: do not serialize public keys in outPk
...
They can be reconstructed from vout
2016-08-28 21:29:43 +01:00
moneromooo-monero
83ab3151e8
wallet2_api: zero amounts are now allowed with rct
2016-08-28 21:29:41 +01:00
moneromooo-monero
096ac06521
wallet2_api: update on_money_{received,spent} prototypes for rct changes
2016-08-28 21:29:40 +01:00
moneromooo-monero
3cb2edec66
rpc: send global indices along with blocks/transacions on refresh
...
This plugs a privacy leak, where the wallet tells the daemon
which transactions contain outputs for the wallet by asking
for additional information for that particular transaction.
As a nice bonus, this actually makes refresh slightly faster.
2016-08-28 21:29:38 +01:00
moneromooo-monero
414b424d32
core: always use the new simple rct variant
2016-08-28 21:29:36 +01:00
moneromooo-monero
84c82cd775
wallet: better tx input selection
...
We try to avoid related inputs, when possible
2016-08-28 21:29:32 +01:00
moneromooo-monero
1e21651f24
rct: use the already defined H where possible
...
Found by luigi1111w
2016-08-28 21:29:29 +01:00
moneromooo-monero
07d353dfc6
wallet: handle 0 change properly
...
With RCT, we allow 0 size outputs, to try and encourage txes
with two inputs and two outputs. Consolidation would then
have two non zero inputs, one zero output, and one larger
output.
2016-08-28 21:29:27 +01:00
moneromooo-monero
e81a2b2cfa
port get_tx_key/check_tx_key to rct
2016-08-28 21:29:24 +01:00
moneromooo-monero
a4d4d6194b
integrate simple rct api
2016-08-28 21:29:20 +01:00
moneromooo-monero
1e8d37e7d8
serialization: add override for serializing bool
2016-08-28 21:29:19 +01:00
Shen Noether
dbb5f2d6a3
ringct: optimization/cleanup of hash functions
2016-08-28 21:29:16 +01:00
Shen Noether
4fd01f2bee
ringct: "simple" ringct variant
...
Allows the fake outs to be in different positions for each ring.
For rct inputs only.
2016-08-28 21:29:14 +01:00
moneromooo-monero
37c895e5e3
wallet: rct specific output selection
...
Before the normal selection, we attempt to find either one or two
suitable outputs to use as inputs to the rct tx. The intent is that
most rct txes will have one or two inputs, and we want all to look
the same if possible.
When two outputs are needed, we try to find a pair which are not
related (ie, by being from the same or similar block height).
2016-08-28 21:29:11 +01:00
moneromooo-monero
1181c57967
wallet: make sweep_all work with rct txes too
2016-08-28 21:29:09 +01:00
moneromooo-monero
c2ec6d35b9
mixable transactions must be rct for v3
2016-08-28 21:29:07 +01:00
moneromooo-monero
1017a75460
wallet: factor transfer_rct code with transfer code
...
The "transfer" simplewallet command is renamed to "transfer_original".
"transfer_new" is renamed "transfer", "transfer_rct" is removed,
and the new "transfer" now selects rct or non rct transactions
based on the current block height.
2016-08-28 21:29:05 +01:00
moneromooo-monero
f5465d8246
Condition v2 txes on v3 hard fork
2016-08-28 21:29:04 +01:00
moneromooo-monero
59a66e209a
move the rct commitments to the output_amounts database
...
Since these are needed at the same time as the output pubkeys,
this is a whole lot faster, and takes less space. Only outputs
of 0 amount store the commitment. When reading other outputs,
a fake commitment is regenerated on the fly. This avoids having
to rewrite the database to add space for fake commitments for
existing outputs.
This code relies on two things:
- LMDB must support fixed size records per key, rather than
per database (ie, all records on key 0 are the same size, all
records for non 0 keys are same size, but records from key 0
and non 0 keys do have different sizes).
- the commitment must be directly after the rest of the data
in outkey and output_data_t.
2016-08-28 21:29:02 +01:00
moneromooo-monero
6d0e47148b
rct: add the tx prefix hash into the MLSAG
...
to protect the non-signatures parts of the tx from tampering.
2016-08-28 21:28:58 +01:00
moneromooo-monero
35dce5c70c
ringct: fix size unit mismatch calling keccak
2016-08-28 21:28:57 +01:00
moneromooo-monero
20e50ec7f7
ringct: do not serialize what can be reconstructed
...
The mixRing (output keys and commitments) and II fields (key images)
can be reconstructed from vin data.
This saves some modest amount of space in the tx.
2016-08-28 21:28:55 +01:00
moneromooo-monero
ada527558f
Use the supplied hard fork version in validate_miner_transaction
...
rather than using the current one. No functional changes, but may
save some bugs in the future.
2016-08-28 21:28:51 +01:00
moneromooo-monero
acbe06d8e9
wallet: update spent status when an accepted tx disappears
2016-08-28 21:28:49 +01:00
moneromooo-monero
089df4af83
wallet: reset output spent status on blockchain reorg
...
If the blockchain gets reorganized, all outputs spent in the part
of the blockchain that's blown away need to be reset to unspent
(they may end up spent again on the blocks that replace the blocks
that are removed, however).
2016-08-28 21:28:47 +01:00
moneromooo-monero
73d59f17e1
ringct: catch errors from ge_frombytes_vartime
2016-08-28 21:28:45 +01:00
moneromooo-monero
359f46901e
ringct: add missing size check for ecdhInfo
2016-08-28 21:28:41 +01:00
moneromooo-monero
229968eafc
ringct: change asserts to return false for boolean functions
2016-08-28 21:28:39 +01:00
moneromooo-monero
dc4aad7eb5
add rct to the protocol
...
It is not yet constrained to a fork, so don't use on the real network
or you'll be orphaned or rejected.
2016-08-28 21:28:37 +01:00
moneromooo-monero
211d1db762
db_lmdb: update reset for recent db changes
...
- we need to drop the new m_tx_indices database
- we reset the version to current version
This fixes the core tests failing to initialize.
2016-08-28 21:28:35 +01:00
moneromooo-monero
dee42d6dac
ringct: add functions to commit to an amount
...
One to commit to an amount with zero key (for use with fake
commitments for pre-rct outputs), and one with an arbitrary
key (for rct outputs).
2016-08-28 21:28:33 +01:00
moneromooo-monero
cc7f449d57
make rct tx serialization work
...
It may be suboptimal, but it's a pain to have to rebuild everything
when some of this changes.
Also, no clue why there seems to be two different code paths for
serializing a tx...
2016-08-28 21:28:31 +01:00
moneromooo-monero
e70e8a69f4
crypto: error out where appropriate
2016-08-28 21:28:29 +01:00
moneromooo-monero
54f7429cf6
ringct: allow no outputs, and add tests for this and fees
2016-08-28 21:28:27 +01:00
moneromooo-monero
e99904ac31
ringct: make fee optional
2016-08-28 21:28:25 +01:00
Shen Noether
f8c04ad94f
ringct: txn fee stuff
2016-08-28 21:28:23 +01:00
moneromooo-monero
66f96260b2
ringct: new {gen,decode}Rct APIs for convenience
...
A new version of genRct takes the mixRing as parameter, instead
of the inPk. inPk are part of the mixRing, and it is cleaner to
pass the mixRing data than to fetch it from the RingCT code.
A new version of decodeRct also returns the mask.
Also, failure to decode throws, so errors are properly detected.
2016-08-28 21:28:21 +01:00
moneromooo-monero
789b2e21f6
ringct: add more convenience functions
2016-08-28 21:28:20 +01:00
moneromooo-monero
98564439f8
core: link against libringct
2016-08-28 21:28:18 +01:00
moneromooo-monero
4258dab4d6
core: new /getrandom_rctouts.bin binary RPC call
...
to get random ringct outputs to mix with
2016-08-28 21:28:16 +01:00
moneromooo-monero
c3a2e1450a
ringct: add convenience functions to bridge ringct and cryptonote
2016-08-28 21:28:14 +01:00
moneromooo-monero
eb56d0f994
blockchain_db: add functions for adding/removing/getting rct commitments
2016-08-28 21:28:11 +01:00
moneromooo-monero
82072e701a
ringct: restore verRange check in debug mode
2016-08-28 21:28:08 +01:00
moneromooo-monero
63856cad29
ringct: add check for destinations/amount size being equal
2016-08-28 21:28:07 +01:00
moneromooo-monero
e816a09292
ringct: fix off by 1 in mixin usage
2016-08-28 21:28:04 +01:00
moneromooo-monero
09c5ea43a2
ringct: simplify random key generation
2016-08-28 21:28:03 +01:00
Shen Noether
56f6549962
ringct: cosmetic fixes
...
Ported from Shen's RingCT repo
2016-08-28 21:27:59 +01:00
Shen Noether
55ff136e12
ringct: changes to hashToPointSimple to calcualte H2 values
...
Ported from Shen's RingCT repo
2016-08-28 21:27:57 +01:00
Shen Noether
63733b1785
ringct: compare keys with bitwise equality, not crypto ops
...
Ported from Shen's RingCT repo
2016-08-28 21:27:56 +01:00
Shen Noether
98f4c6f7eb
ringct: fix size argument to cn_fast_hash
...
Ported from Shen's RingCT repo
2016-08-28 21:27:54 +01:00
Shen Noether
09fb9f4b75
Fix sc_0 to skGen in ProveRange
2016-08-28 21:27:48 +01:00
moneromooo-monero
d37c1db032
ringct: add a few consts where appropriate
2016-08-28 21:27:45 +01:00
moneromooo-monero
700248f59e
tests: more ringct range proof tests
2016-08-28 21:27:43 +01:00
moneromooo-monero
d02f9995a8
rct: add serialization machinery to rct types
2016-08-28 21:27:41 +01:00
moneromooo-monero
0ff8305426
serialization: declare do_serialize specializations before use
...
This lets my gcc picks those instead of the generic template
where appropriate (and then fail since std::vector<something>
does not have a serialize method.
2016-08-28 21:27:38 +01:00
Shen Noether
8b135e7aa3
Added note on generating H2
2016-08-28 21:27:36 +01:00
Shen Noether
4d639d90ca
Fixed missing last index H2
2016-08-28 21:27:34 +01:00
moneromooo-monero
9e82b694da
remove original Cryptonote blockchain_storage blockchain format
2016-08-28 21:27:32 +01:00
moneromooo-monero
86b4426191
ringct: lock access to the PRNG
2016-08-28 21:27:30 +01:00
moneromooo-monero
4d7f073491
ringct: add simple input validation
...
Throw when inputs aren't the expected size.
2016-08-28 21:27:28 +01:00
moneromooo-monero
b656001030
ringct: add convenience operators to key
2016-08-28 21:27:24 +01:00
moneromooo-monero
9b1afe5f2d
ringct: import of Shen Noether's ring confidential transactions
2016-08-28 21:26:54 +01:00
Howard Chu
dc411ea3b7
Change default db-sync-mode to fast, not fastest
2016-08-28 16:20:22 +01:00
Riccardo Spagni
a569b264bc
Merge pull request #991
...
f88029e
2016-08-26 20:39:21 +02:00
moneromooo-monero
f88029e72a
db_lmdb: do not try to modify the database in read only mode
2016-08-26 19:33:25 +01:00
Riccardo Spagni
2702e4999a
Merge pull request #984
...
78035d2
2016-08-26 10:33:10 +02:00
Riccardo Spagni
7000ed45ec
Merge pull request #982
...
65238d2fix #691 removed help about leaving wallet name empty on --generate-new-wallet (guzzi_jones)
2016-08-26 10:32:30 +02:00
Riccardo Spagni
9308b4e8b9
Merge pull request #978
...
99dd572bcf7b6732bc7b4cbe534db1a5a93
2016-08-26 10:32:00 +02:00
Riccardo Spagni
391c567f37
Merge pull request #976
...
c2f4e16
2016-08-26 10:31:24 +02:00
Thomas Winget
78035d2b6c
Fix fake 'network synchronized, begin using' messages
2016-08-23 22:52:25 -04:00
guzzi_jones
65238d281c
fix #691 removed help about leaving wallet name empty on --generate-new-wallet
2016-08-24 00:03:36 +00:00
Ilya Kitaev
bcf7b67cd6
libwallet_api: Wallet::amountFromString fixed
2016-08-23 13:47:21 +03:00
Ilya Kitaev
32bc7b41c0
libwallet_api: helper method to return maximumAllowedAmount
2016-08-23 12:35:45 +03:00
Riccardo Spagni
17157f8a22
Merge pull request #972
...
2c5e68f
2016-08-22 22:55:53 +02:00
Riccardo Spagni
79cdedb90c
Merge pull request #970
...
25f529a
2016-08-22 22:55:24 +02:00
Riccardo Spagni
13222f9ff5
Merge pull request #968
...
9cca53a
2016-08-22 22:55:00 +02:00
Ilya Kitaev
b1a5a937ff
libwallet_api: do not store wallet on close if status is not ok
2016-08-22 22:47:59 +03:00
moneromooo-monero
c2f4e16c59
simplewallet: default to max-concurrency 1 on MacOS X
...
A suspected bug in pthread/kernel, though might be that
I messed something up too...
This might rope in more platforms though.
2016-08-21 12:26:29 +01:00
redfish
2c5e68fb73
cmake: fix typo in handling of STACK_TRACE
...
This fixes the log output not getting redirected to log file.
2016-08-19 23:38:44 -04:00
moneromooo-monero
25f529aa67
wallet: store key images after importing them
...
It avoids rescan_spent resetting spent status, for example.
2016-08-17 08:37:56 +01:00
moneromooo-monero
9cca53ac29
wallet: fix build on Mac and Windows (missing include)
...
Reported by RaskaRuby, tested by iDunk5400.
2016-08-17 08:08:49 +01:00
moneromooo-monero
e596e25367
simplewallet: do not suggest removing cache if the password was wrong
2016-08-16 23:15:35 +01:00
moneromooo-monero
7e4e0021f4
daemon: print time to next fork
2016-08-12 20:32:23 +01:00
Riccardo Spagni
0faf572db8
Merge pull request #948
...
11dc0911593553
2016-08-11 22:43:14 +02:00
moneromooo-monero
11dc091464
Fake outs set is now decided by the wallet
...
This plugs a privacy leak from the wallet to the daemon,
as the daemon could previously see what input is included
as a transaction input, which the daemon hadn't previously
supplied. Now, the wallet requests a particular set of
outputs, including the real one.
This can result in transactions that can't be accepted if
the wallet happens to select too many outputs with non standard
unlock times. The daemon could know this and select another
output, but the wallet is blind to it. It's currently very
unlikely since I don't think anything uses non default
unlock times. The wallet requests more outputs than necessary
so it can use spares if any of the returns outputs are still
locked. If there are not enough spares to reach the desired
mixin, the transaction will fail.
2016-08-11 14:35:27 +01:00
Riccardo Spagni
cb17c4da4f
Merge pull request #953
...
240864f
2016-08-11 14:58:04 +02:00
Riccardo Spagni
b026650be9
Merge pull request #952
...
709c724#4 ) (hyc)
d2644c1
2016-08-11 14:57:33 +02:00
Riccardo Spagni
9273899ee7
Merge pull request #949
...
da1007f
2016-08-11 14:56:40 +02:00
Riccardo Spagni
d46a58dab0
Merge pull request #947
...
663fc32
2016-08-11 14:53:16 +02:00
Riccardo Spagni
8d098610a7
Merge pull request #943
...
f0c0a3fFix #864 Squashed commit of the following: commit 9af9e4223b58bbb65a3519af2c2bfc273cbd23d6 fixed some formatting commit c7920e1cf88ff46eb9294101344d9a567f22e2da Merge: 97eb28b 1da1c68 fix#864 fix using boolean commit 97eb28ba5dd49ddde8c8785f39b24d955e5de31c Fix #864 boolean value used to verify on new wallet commit 1da1c68bd3a9a373c70482b6e6e95251096149f1 fix #864 changed to boolean to prompt for verify commit 5bee96652434762d2c91ce31a1b1c9f169446ddc fix 864; made variable names easier for understanding branching. commit 45715960d30293f781b2ff9e5e647c2ec893f4a3 fix #864 ; allow password to be entered twice for new wallets for verification. fix #864 password entry verification; ammended boolean fix #864 ; default constructor for password_container should set verify=true (guzzi_jones)
2016-08-11 14:52:53 +02:00
moneromooo-monero
240864f529
db_lmdb: errors dropping hf starting height db on reset are not fatal
...
This db is now dropped unconditionally, so may or may not be there
in the first place.
2016-08-10 10:50:17 +01:00
hyc
709c7247cd
Better fix ( #4 )
2016-08-09 18:54:20 -05:00
luigi1111
d2644c15c3
fix restore-deterministic height
...
Simplewallet improperly skipped the restore from height code if
restoring a deterministic wallet AND not specifying a wallet file in the
command line. The other generate options require a wallet file as an
argument, which prevents "ask_wallet_create_if_needed()" from being
called, which in turn causes "m_generate_new" to remain unset.
Specifying a wallet file at launch with --restore-deterministic emulated
this behavior.
2016-08-09 17:46:49 -05:00
moneromooo-monero
da1007f7cd
simplewallet: make the refresh thread into more generic idle thread
2016-08-07 16:08:50 +01:00
moneromooo-monero
663fc32809
wallet2: if importing key images fails, print failure index
2016-08-04 08:19:29 +01:00
moneromooo-monero
1593553e03
new unlocked parameter to output_histogram
...
This constrains the number of instances of any amount
to the unlocked ones (as defined by the default unlock time
setting: outputs with non default unlock time are not
considered, so may be counted as unlocked even if they are
not actually unlocked).
2016-08-01 22:16:00 +01:00
guzzi_jones
f0c0a3fb65
Fix #864
...
Squashed commit of the following:
commit 9af9e4223b58bbb65a3519af2c2bfc273cbd23d6
fixed some formatting
commit c7920e1cf88ff46eb9294101344d9a567f22e2da
Merge: 97eb28b 1da1c68
fix#864 fix using boolean
commit 97eb28ba5dd49ddde8c8785f39b24d955e5de31c
Fix #864 boolean value used to verify on new wallet
commit 1da1c68bd3a9a373c70482b6e6e95251096149f1
fix #864 changed to boolean to prompt for verify
commit 5bee96652434762d2c91ce31a1b1c9f169446ddc
fix 864; made variable names easier for understanding branching.
commit 45715960d30293f781b2ff9e5e647c2ec893f4a3
fix #864 ; allow password to be entered twice for new wallets for verification.
fix #864 password entry verification; ammended boolean
fix #864 ; default constructor for password_container should set verify=true
2016-08-01 02:32:14 +00:00
redfish
042db0bd0f
cmake: cleanup logic that sets flags per target/subdir
...
The previous logic that used a COMMON_*_FLAGS intermediate variable
and then re-assigned CMAKE_*_FLAGS before including each subdirectory
was confusing and ugly. This PR is the right way to do it.
This commit is purely refactoring: built binaries unchanged.
2016-07-28 21:20:50 -04:00
Riccardo Spagni
0fbe9cfcdb
Merge pull request #937
...
0f990d0
2016-07-27 11:07:38 +02:00
Riccardo Spagni
72f2934e20
Merge pull request #936
...
461887389e68d7121165f22d8344
2016-07-27 11:06:57 +02:00
redfish
0f990d0183
cmake,common: flag for stack trace
...
By default the flag is enabled whenever libunwind is found on the
system, with the exception of static build on OSX (for which we can't
install the throw hook #932 due to lack of support for --wrap in OSX
ld64 linker).
2016-07-27 01:52:33 -04:00
moneromooo-monero
121165f222
db_lmdb: add some missing api call checks
2016-07-26 22:39:51 +01:00
moneromooo-monero
22d8344cb5
core_rpc_server: fix gray/white peer list mixup
2016-07-26 20:02:43 +01:00
Riccardo Spagni
b34506da81
Merge pull request #928
...
ebf97d7
2016-07-26 08:55:25 +02:00
moneromooo-monero
b3801faafa
hardfork: fix off by one in rescaning fork state after restart
...
This code should die anyway.
2016-07-25 23:16:02 +01:00
moneromooo-monero
ebf97d76f0
wallet: new {ex,im}port_key_images commands and RPC calls
...
They are used to export a signed set of key images from a wallet
with a private spend key, so an auditor with the matching view key
may see which of those are spent, and which are not.
2016-07-24 09:23:30 +01:00
redfish
8bed9a42f7
cmake: wallet: libunbound is not always static
...
It is not clear why libunbound was added to this in the first place,
since it wasn't here before and #915 doesn't seem to introduce any
new dependency on it.
Tested build with STATIC=OFF (with and without libunbound-dev libunbound8
installed) and STATIC=ON, on Ubuntu Trusty, Debian Jessie, and Arch
Linux. For static builds, beware of #926 and #907 .
If this hack was introduced to make it build on some other system
(Windows? OS X?), then it will have to be dealt with, but not this way.
2016-07-23 15:04:15 -04:00
Riccardo Spagni
47618c2710
Merge pull request #923
...
8312887
2016-07-23 09:20:18 +02:00
Riccardo Spagni
07f974a499
Merge pull request #916
...
b89b963
2016-07-23 09:19:39 +02:00
Riccardo Spagni
b582764bd6
Merge pull request #915
...
d7597c56d32a3d193d25110c06dd9d2cb4fd27b883083380c00ed12b
2016-07-23 09:17:21 +02:00
Riccardo Spagni
90f2e19d51
Merge pull request #910
...
080a606
2016-07-23 09:13:15 +02:00
moneromooo-monero
83128877e0
simplewallet: suggest removing cache when loading fails
2016-07-22 17:31:52 +01:00
moneromooo-monero
b89b96394a
wallet: add unconfirmed incoming txes from the txpool
...
Shown in show_transfers simplewallet command, and get_transfers
RPC command, if req.pool is true.
2016-07-20 19:14:44 +01:00
moneromooo-monero
080a60610f
simplewallet: revert to foreground refresh at startup
...
Background refresh is confusing to users at startup.
2016-07-20 19:09:32 +01:00
Riccardo Spagni
38e5156392
Merge pull request #914
...
87b1153
2016-07-20 14:29:33 +02:00
Riccardo Spagni
8e143fcf1d
Merge pull request #911
...
d7b681c
2016-07-20 14:01:27 +02:00
Riccardo Spagni
77015e8132
Merge pull request #904
...
f07f12019349d7f3e09f3f4b35aefa85cd84dce26b
2016-07-20 13:56:59 +02:00
Riccardo Spagni
fc3e135b83
Merge pull request #902
...
014f3a0
2016-07-20 13:55:59 +02:00
Riccardo Spagni
b1bec02ce5
Merge pull request #900
...
78cc10f34ecfdb
2016-07-20 13:53:25 +02:00
Riccardo Spagni
07f1d4e04d
Merge pull request #899
...
a95a2cb
2016-07-20 13:52:54 +02:00
Riccardo Spagni
992b6cce06
Merge pull request #897
...
ce6b831
2016-07-20 13:52:27 +02:00
moneromooo-monero
89d9f382a0
wallet: add command and RPC to sign/verify data
...
Signing is done using the spend key, since the view key may
be shared. This could be extended later, to let the user choose
which key (even a per tx key).
simplewallet's sign/verify API uses a file. The RPC uses a
string (simplewallet can't easily do strings since commands
receive a tokenized set of arguments).
2016-07-19 20:39:03 +01:00
Ilya Kitaev
d7597c5961
refreshing wallet even if error happened
2016-07-18 23:03:09 +03:00
Ilya Kitaev
6d32a3d16b
wallet_api: async init, Wallet::connected status, log level
2016-07-18 23:03:09 +03:00
Ilya Kitaev
193d251360
libwallet_api cmake: conditionally creating libwallet_merged2 only for
...
STATIC build
2016-07-18 23:03:09 +03:00
Ilya Kitaev
10c06ddac7
wallet_api: segfault on refresh fixed
2016-07-18 23:03:09 +03:00
Ilya Kitaev
9d2cb4f36c
WalletListener functionality
2016-07-18 23:02:47 +03:00
Ilya Kitaev
d27b883b2d
hack to successfull linking for MSYS2
2016-07-18 23:02:47 +03:00
Ilya Kitaev
083380cb8f
Transaction fee multiplier aka priority integraged
2016-07-18 23:02:18 +03:00
Ilya Kitaev
00ed12bd6c
Wallet::paymentIdValid
2016-07-18 23:02:18 +03:00
moneromooo-monero
87b1153f37
wallet2_api: use uint64_t for amounts
2016-07-17 09:33:31 +01:00
moneromooo-monero
d7b681cd65
remove hf_starting_height db
...
It's not really needed, it used to be an optimization for when
that code was not using the db and needed to recalculate things
fast on startup.
2016-07-13 21:38:34 +01:00
redfish
fa85cd845f
common: stack trace: make clang happy with func ptrs
...
Tested that it builds with:
gcc 6.1.1, STATIC=OFF,i686
gcc 6.1.1, STATIC=OFF,armv7h
clang 3.8, STATIC=OFF,i686
clang 3.8, STATIC=OFF,armv7h
gcc 6.1.1, STATIC=ON,i686
clang 3.8, STATIC=ON,i686
Also tested that stack trace is generated fine on exception on:
i686, gcc 6.1.1, STATIC=OFF
(didn't bother testing all the other platforms/configs)
This should fix the build problem on OSX (#871 , #901 ), but
I don't have OSX, so I could only test Clang on Linux.
2016-07-10 21:26:11 -04:00
moneromooo-monero
014f3a0d39
Add a daemon RPC version, and make simplewallet check it
...
If the version is different, simplewallet will refuse to use that
daemon, unless --allow-mismatched-daemon-version is used.
2016-07-10 16:49:40 +01:00
moneromooo-monero
78cc10f3fa
daemon: fix ban seconds being misinterpreted as absolute
...
Absolute to relative conversion is already done by the callee.
2016-07-10 15:13:53 +01:00
moneromooo-monero
34ecfdbf15
rpc: fix get_bans and set_bans RPC names, they were missing a _
2016-07-10 15:10:51 +01:00
moneromooo-monero
a95a2cbc4d
wallet_rpc_server: add payment id from integrated addresses to extra
2016-07-10 13:46:18 +01:00
redfish
ce6b83128e
daemonizer: posix: keep parent's working dir and umask
...
Keep the working directory (and umask) inherited from
the parent. Otherwise, it's impossible to control
the working directory of the daemon (from systemd, for
example).
Furthermoer, bitmonerod attempts to create logging directories and files
*in current working directory*. This fails due to permission denied and
generates a (caught, nonfatal) exception. Below is the strace with this
patch applied (so, no `chdir("/")`), showing successful opens at `log/`
relative path. Without this patch they fail (sorry, didn't save the
trace).
```
28911 getcwd("/.../bitmonero", 128) = 25
28911 stat64("/var/lib/bitmonero/.bitmonero", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
28911 stat64("/etc/bitmonerod.conf", {st_mode=S_IFREG|0644, st_size=244, ...}) = 0
28911 open("/etc/bitmonerod.conf", O_RDONLY|O_LARGEFILE) = 3
28911 open("/var/log/bitmonero/bitmonero.log", O_WRONLY|O_CREAT|O_APPEND|O_LARGEFILE, 0666) = 3
28911 stat64("log", {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0
28911 stat64("log/dbg", {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0
28911 open("log/dbg/main.log", O_WRONLY|O_CREAT|O_TRUNC|O_LARGEFILE, 0666) = 4
```
The reasoning of chdir("/") in order to prevent the daemon from holding
a filesystem in busy state is not compelling at all: the choice of
working directory for the daemon is the user's business not the
daemon's.
2016-07-09 20:16:44 -04:00
moneromooo-monero
a0bf85d09d
wallet2_api: make this build (smatch needs .str() for /=)
2016-07-07 22:42:59 +01:00
Riccardo Spagni
18fa01c092
Merge pull request #884
...
c2ad9ca
2016-07-06 18:20:17 +02:00
Riccardo Spagni
1088ed862b
Merge pull request #883
...
459ec60
2016-07-06 18:19:40 +02:00
Riccardo Spagni
0b65717a5d
Merge pull request #882
...
f11191a
2016-07-06 18:17:08 +02:00
Riccardo Spagni
00fd89a36d
Merge pull request #879
...
6b08001
2016-07-06 18:15:36 +02:00
Riccardo Spagni
3923cbddaf
Merge pull request #878
...
945c272
2016-07-06 18:14:34 +02:00
Riccardo Spagni
628f57b212
Merge pull request #873
...
d718960
2016-07-06 18:12:03 +02:00
moneromooo-monero
c2ad9caf01
allow peers without port
...
The default port is then used
2016-07-03 12:51:12 +01:00
moneromooo-monero
459ec6040e
daemon: print exception errors when failing to parse config file
...
When an exception happens while reading the config file, we need
to print the error, as the logging system isn't initialized yet,
so the generic catch will not print anything.
2016-06-30 22:15:40 +01:00
moneromooo-monero
f11191a818
rpc: restrict number of fake outs requested in restricted rpc mode
2016-06-29 20:43:14 +01:00
Ilya Kitaev
beb6d9200d
CMake: GPL 'libutils' script removed
2016-06-24 14:49:23 +03:00
Ilya Kitaev
ab61ba0c9b
Merge branch 'master' of https://github.com/mbg033/bitmonero
2016-06-23 16:23:09 +03:00
Ilya Kitaev
d60864785f
WalletManager::findWallets: searching by "keys" files instead of
...
"address.txt" files
2016-06-23 16:01:41 +03:00
Ilya Kitaev
ca61153003
Wallet: payment id and integrated address
2016-06-23 16:01:41 +03:00
Ilya Kitaev
23cbf6fd97
PendingTransactionImpl: pointer->reference
2016-06-23 16:01:41 +03:00
Ilya Kitaev
c1d9e7cd2a
commented regex
2016-06-23 16:01:41 +03:00
Ilya Kitaev
563baf1b68
Typo fixed
2016-06-23 16:01:41 +03:00
Ilya Kitaev
2efec04f74
Wallet::createTransaction: added mixin_count param
2016-06-23 16:01:41 +03:00
Ilya Kitaev
85a632244e
double/string to monero integer convertion methods
2016-06-23 16:01:41 +03:00
Ilya Kitaev
e7d8f2a085
wallet::default_mixin exposed to public interface as
...
Wallet::setDefaultMixin, Wallet::defaultMixin;
wallet::create_transaction_2 used in Wallet::createTransaction
2016-06-23 16:01:41 +03:00
Ilya Kitaev
a5374897f8
Wallet::filename, Wallet::keysFilename, tests for move wallet
2016-06-23 16:01:41 +03:00
Ilya Kitaev
a1eddcd693
removed unused "using"
2016-06-23 16:01:41 +03:00
Ilya Kitaev
8390bfa770
Wallet API : WalletManager::findWallets() added
2016-06-23 16:01:41 +03:00
Ilya Kitaev
dbc0b039b4
installing wallet_api header
2016-06-23 16:01:33 +03:00
Ilya Kitaev
191cb594de
all wallet dependencies merged to single static lib
2016-06-23 16:01:33 +03:00
Ilya Kitaev
64348a2d11
WalletListener::moneySpent test
2016-06-23 16:01:33 +03:00
Ilya Kitaev
060bb62e29
WalletListener::moneySpent(), WalletListener::moneyReceived()
2016-06-23 16:01:33 +03:00
Ilya Kitaev
214014c048
i_wallet_callback: virtual dtor
2016-06-23 16:01:33 +03:00
Ilya Kitaev
374577018d
started WalletListener
2016-06-23 16:01:33 +03:00
Ilya Kitaev
e6fdd5dd10
TransactionHistory continued
2016-06-23 16:01:26 +03:00
Ilya Kitaev
3dd4b4ccf9
merged with upstream
2016-06-23 15:50:40 +03:00
Ilya Kitaev
d500272fa8
Wallet API : transaction history in progress
2016-06-23 15:50:33 +03:00
Ilya Kitaev
663ed04eb8
transaction history api in progress
2016-06-23 15:50:17 +03:00
Ilya Kitaev
12345d382c
api implementation splitted over separate files
2016-06-23 15:50:17 +03:00
Ilya Kitaev
60508e6bae
TransactionInfo / TransactionHistory APIs design
2016-06-23 15:50:17 +03:00
Ilya Kitaev
951f3b5d83
Wallet::createTransaction API introduced
...
Transaction API continued
TODOs for Transaction/Transfer interface
2016-06-23 15:49:54 +03:00
Ilya Kitaev
7c51227f88
Wallet::transfer in progress
2016-06-23 15:49:36 +03:00
Ilya Kitaev
e04c67ac4c
Wallet::refresh + tests
2016-06-23 15:49:36 +03:00
Ilya Kitaev
9cdf0b7d7f
"testnet" is default parameter
2016-06-23 15:49:36 +03:00
Ilya Kitaev
caf0e02787
testnet option, Wallet::balance(), Wallet::unlockedBalance()
2016-06-23 15:49:22 +03:00
Ilya Kitaev
8df820b301
- testnet option added to api;
2016-06-23 15:49:07 +03:00
Ilya Kitaev
94eaeb50b2
wallet2::store() implemented within wallet2::store_to
2016-06-23 15:40:48 +03:00
moneromooo-monero
6b08001f9e
simplewallet: mention the background refresh thread when starting
...
It should be less confusing for people who're used to the foreground
refresh from earlier versions.
2016-06-22 23:05:50 +01:00
moneromooo-monero
945c272f6c
wallet: add a fee multiplier
...
Fee can now be multiplied by 2 or 3, if users want to give
priority to their transactions. There are only three levels
to avoid too much fingerprinting. Default is 1 (minimum fee).
The default multiplier can be set by "set fee-multiplier X".
2016-06-22 22:21:30 +01:00
Ilya Kitaev
4e5521d87d
PendingTransactionImpl: pointer->reference
2016-06-22 15:50:59 +03:00
Ilya Kitaev
7b7cf21644
commented regex
2016-06-22 15:06:19 +03:00
Ilya Kitaev
eec0f57d60
Typo fixed
2016-06-22 14:37:53 +03:00
luigi1111
d7189600ae
remove POSIX_C_SOURCE and remove dlfcn.h for static builds
...
The former was a faulty "fix" for gmtime_r not existing on Windows. The latter is needed only for dynamic builds, and is not included with msys2, which ends up fine because Windows is only built static at this time.
2016-06-21 11:16:25 -05:00
Riccardo Spagni
de91bb75a1
Merge pull request #870
...
57dce80
2016-06-21 09:32:32 +02:00
Riccardo Spagni
8c34cca0f0
Merge pull request #867
...
f0b85c1
2016-06-21 09:31:50 +02:00
Riccardo Spagni
03477063ba
Merge pull request #868
...
15c2b69f72388c
2016-06-21 09:30:56 +02:00
luigi1111
57dce8083a
gmtime for Windows
...
gmtime_r is not available in Windows, use gmtime_s instead. Also change shorthand codes (also not working in Windows).
2016-06-20 18:14:12 -05:00
Ilya Kitaev
f1c4a376af
Wallet::createTransaction: added mixin_count param
2016-06-20 22:56:30 +03:00
moneromooo-monero
15c2b69db7
common: fix build without libunwind
2016-06-20 19:23:32 +01:00
moneromooo-monero
f0b85c1631
simplewallet: add a status command
...
It matches the daemon, and should allow people who're suspicious
of the background refresh to know they're synced.
2016-06-20 19:11:10 +01:00
Riccardo Spagni
21b3a1b43c
Merge pull request #863
...
0c6e9e4
2016-06-19 21:52:35 +02:00
Riccardo Spagni
2072c642d1
Merge pull request #862
...
5dc09f2f8213c0
2016-06-19 21:51:32 +02:00
Riccardo Spagni
551d44a989
Merge pull request #856
...
c5f00bc2470b2077d8fc3
2016-06-19 21:30:20 +02:00
Riccardo Spagni
ba61f37f9c
Merge pull request #846
...
de030d9c2d7300689874121dbc9570f36341a7772f6462a3a
2016-06-19 21:25:52 +02:00
Riccardo Spagni
e97d96ccfb
Merge pull request #775
...
e409e59ef4ff42
2016-06-19 21:14:11 +02:00
moneromooo-monero
5dc09f2666
wallet_rpc_server: fix some string values being returned between <>
2016-06-19 17:52:46 +01:00
Ilya Kitaev
3318addafa
double/string to monero integer convertion methods
2016-06-16 16:42:33 +03:00
moneromooo-monero
0c6e9e4ddd
rpc: fix getblock RPC sending blob as binary, not hex dump
2016-06-10 17:48:19 +01:00
Ilya Kitaev
3ac20a46b3
wallet::default_mixin exposed to public interface as
...
Wallet::setDefaultMixin, Wallet::defaultMixin;
wallet::create_transaction_2 used in Wallet::createTransaction
2016-06-10 13:52:10 +03:00
Ilya Kitaev
c554055ce4
Wallet::filename, Wallet::keysFilename, tests for move wallet
2016-06-10 12:51:09 +03:00
moneromooo-monero
c5f00bc751
cn_deserialize: add minergate data
2016-06-06 18:51:36 +01:00
moneromooo-monero
2470b20029
cn_deserialize: print extra nonce as hex data
2016-06-06 18:51:10 +01:00
blashyrkh
77d8fc3344
tx_extra: parse new chunk added by minergate
...
Patch from blashyrkh on forum.getmonero.org:
https://forum.getmonero.org/5/support/2530/simplewallet-returns-invalid-paymentid
2016-06-06 18:29:16 +01:00
Ilya Kitaev
8f9d98b3e0
removed unused "using"
2016-06-03 16:56:13 +03:00
Ilya Kitaev
2facbe77e4
Wallet API : WalletManager::findWallets() added
2016-06-03 14:52:58 +03:00
Ilya Kitaev
bc4584c1ff
Merge remote-tracking branch 'upstream/master'
2016-05-27 11:33:08 +03:00
Ilya Kitaev
4327548915
installing wallet_api header
2016-05-27 10:58:07 +03:00
Ilya Kitaev
d43ad22595
all wallet dependencies merged to single static lib
2016-05-27 10:00:01 +03:00
redfish
95be58ef0e
crypto: slow-hash: disable mul implemented in asm for ARM
...
The implementation of mul in asm breaks 'slow-hash' test when built with
GCC 6.1.1. Disable this implementation in favor of plain C until it is
fixed.
2016-05-25 15:53:29 -04:00
redfish
68987416ad
src: p2p: add exception spec to throwing destructors
...
The destructors get a noexcept(true) spec by default, but these
destructors in fact throw exceptions. An alternative fix might be to not
throw (most if not all of these throws are non-essential
error-reporting/logging).
2016-05-18 01:02:21 -04:00
redfish
21dbc95b47
crypto: slow-hash: fix misleading indent
...
GCC warned about this one.
2016-05-18 01:02:17 -04:00
redfish
70f363401b
crypto: slow-hash: remove unused hash list for ARM
...
This list is already defined within the function. The
removed definition was shadowed.
2016-05-18 01:02:13 -04:00
redfish
1a7772fbae
crypto: oaes_lib: remove unused _NR array
2016-05-18 01:02:07 -04:00
redfish
6462a3a6db
crypto: fix compile error: use named type in sizeof
...
Btw, the warning 4200 remains disabled, but it did not get triggered
(GCC 6.1.1, ARM). But, perhaps a better way than disabling
the warning would be to do what is suggested here:
http://stackoverflow.com/questions/3350852/how-to-correctly-fix-zero-sized-array-in-struct-union-warning-c4200-without%3E
2016-05-18 01:01:58 -04:00
Riccardo Spagni
a837c9cb0f
Merge pull request #842
...
d539be3
2016-05-17 19:09:57 +02:00
Riccardo Spagni
f03def87ad
Merge pull request #840
...
1c0bffb9f8bc49
2016-05-17 19:09:11 +02:00
Riccardo Spagni
e54e4d96a4
Merge pull request #831
...
9ef8c7ba6e717e3eff37f7a66387d6bce4b
2016-05-17 19:07:28 +02:00
Riccardo Spagni
ae205020f6
Merge pull request #827
...
f1e70d1cebb97c590c439687855d2fb00c019fe8ae3ef
2016-05-17 19:04:41 +02:00
osensei
1c0bffb5f0
Restrict also 'get_connections' and 'getbans' APIs.
2016-05-16 08:34:15 -03:00
Ilya Kitaev
40087a745f
WalletListener::moneySpent test
2016-05-16 13:11:44 +03:00
moneromooo-monero
d539be3359
crypto: make clear generate_random_bytes is not thread safe
...
And add a thread safe version to encourage proper use
2016-05-15 00:05:59 +01:00
osensei
9f8bc4946b
Don't allow 'flush_txpool' and 'setbans' JSON_RPC methods when running in restricted mode.
2016-05-14 03:06:04 -03:00
Ilya Kitaev
27d86b73c6
WalletListener::moneySpent(), WalletListener::moneyReceived()
2016-05-13 16:25:31 +03:00
Ilya Kitaev
ff52c67aa9
i_wallet_callback: virtual dtor
2016-05-13 12:59:29 +03:00
Ilya Kitaev
2d799097ca
Merge remote-tracking branch 'upstream/master'
2016-05-12 15:14:30 +03:00
Ilya Kitaev
5dbd2b8fc3
started WalletListener
2016-05-05 22:24:00 +03:00
Ilya Kitaev
71131a84ea
TransactionHistory continued
2016-05-05 21:30:25 +03:00
moneromooo-monero
9ef8c7b694
tests: fix tests broken by the removal of the block reward accumulation loop
...
The tests for rejection of unmixable outputs in v2 are commented out,
as there are no unmixable outputs created anymore. This should be
restored at some point.
2016-05-01 20:59:41 +01:00
moneromooo-monero
a6e717ed30
cn_deserialize: deserialize tx_extra too
2016-05-01 11:42:48 +01:00
moneromooo-monero
d6bce4be36
core: move tx_extra parsing errors to log level 1
...
They're not fatal, though indicate something wrong
2016-05-01 11:35:06 +01:00
Riccardo Spagni
30dce45643
Merge branch 'performance' of https://github.com/LMDB/bitmonero
2016-04-29 21:41:43 +02:00
Howard Chu
f1e70d15ca
Only log 1/N skipped blocks
2016-04-29 16:50:51 +01:00
Howard Chu
cebb97c913
Move refresh height to keys file from cache file
2016-04-29 15:33:28 +01:00
Howard Chu
590c43988c
Make fast_refresh interruptible
2016-04-29 15:33:28 +01:00
Howard Chu
687855d658
Set refresh height earlier
...
Do it before the generate() call so the value actually gets stored.
2016-04-29 15:33:28 +01:00
Ilya Kitaev
93119344ec
TransactionHistory continued
2016-04-29 16:26:14 +03:00
Riccardo Spagni
8b0d22a2aa
Merge pull request #826
...
76c6bf1
2016-04-29 10:44:59 +02:00
Riccardo Spagni
5b734c2a3a
Merge pull request #825
...
513a658
2016-04-29 10:43:48 +02:00
Howard Chu
2fb00c0666
Fix 19fe8ae3ef
...
Don't prompt for restore-height on generate-new-wallet
2016-04-29 04:51:02 +01:00
moneromooo-monero
e409e59d29
Print stack trace on exceptions
...
if libunwind is found.
Useful for debugging logs.
2016-04-28 23:34:51 +01:00
moneromooo-monero
76c6bf1875
simplewallet: display all settings on set with no arguments
2016-04-28 22:09:49 +01:00
moneromooo-monero
513a658c87
add a --max-concurrency flag
...
It sets the max number of threads to use for a parallel job.
This is different that the number of total threads, since monero
binaries typically start a lot of them.
2016-04-28 20:33:59 +01:00
moneromooo-monero
09dddf281a
wallet: add a filter_by_height field to get_transfers
...
It allows a simple get_transfers (with default 0 min_height and
max_height) to return all transactions, instead of the unexpected
set of txes in block 0, which is probably none at all.
2016-04-27 23:43:39 +01:00
Riccardo Spagni
bdb93cbf3d
Merge pull request #823
...
a687e6e
2016-04-27 09:18:28 +02:00
Riccardo Spagni
29b2cfa3d9
Merge pull request #822
...
48ab3f9
2016-04-27 09:15:15 +02:00
moneromooo-monero
a687e6e592
simplewallet: fix pending transfers fee display in show_transfers
2016-04-26 22:42:26 +01:00
moneromooo-monero
d7bb1752eb
simplewallet: more threading fixes
2016-04-26 22:40:57 +01:00
moneromooo-monero
48ab3f93ff
wallet: add get_transfers rpc call
...
Allows getting in, out, pending, and failed transfers, similarly
to the show_transfers command.
2016-04-26 22:39:52 +01:00
moneromooo-monero
7baed9bd89
wallet: allow attaching notes to txids
2016-04-26 19:07:33 +01:00
moneromooo-monero
ce6f8a6324
wallet: add GMT timestamps to transfers/payments
2016-04-26 19:07:25 +01:00
Riccardo Spagni
3d984854a6
Merge pull request #819
...
31587bd
2016-04-26 18:11:04 +02:00
Riccardo Spagni
cde9dce9c4
Merge pull request #817
...
4b1c0d6
2016-04-26 18:08:59 +02:00
Riccardo Spagni
714dcc2866
Merge pull request #815
...
b0850a9
2016-04-26 18:08:09 +02:00
Riccardo Spagni
7098ad6804
Merge pull request #814
...
68cbe154b325bd
2016-04-26 18:04:00 +02:00
Riccardo Spagni
fbfb8f46a9
Merge pull request #813
...
70c8656d6fd6be
2016-04-26 18:03:31 +02:00
Riccardo Spagni
0fb0e7701b
Merge pull request #812
...
3102feb6bca9a87450656
2016-04-26 18:02:57 +02:00
Riccardo Spagni
0922ae2b43
Merge pull request #811
...
672162db0c18ef
2016-04-26 18:02:26 +02:00
Ilya Kitaev
566166aafd
merged with upstream
2016-04-26 13:46:20 +03:00
Ilya Kitaev
dce5374660
Merge remote-tracking branch 'upstream/master' into develop
2016-04-26 11:08:40 +03:00
Howard Chu
2b0fa05f0d
Another take on migration
...
Delete old indices and recreate them, rather than updating them
Maybe not quite as slow as before.
2016-04-24 17:46:50 +01:00
moneromooo-monero
31587bdd15
random: call abort(3) instead of assert in must_succeed macro
...
Avoids silent use of bad RNG in release builds, in case those
calls might actually fail.
Reported by smooth.
2016-04-24 12:26:56 +01:00
Ilya Kitaev
53a97bdcd3
Wallet API: transaction history in progress
2016-04-22 13:33:09 +03:00
Ilya Kitaev
02c9df5de2
Wallet API : transaction history in progress
2016-04-22 13:21:08 +03:00
moneromooo-monero
4b1c0d69f4
simplewallet: some background refresh threading fixes
...
We want to lock operations which access the blockchain in
wallet2. We also want the background refresh to happen again
when we cancel a foreground refresh. Wrap the locking setup
in a macro so it doesn't get copy/pasted/mangled, and use
a scope exit trick to ensure it's always properly restored.
2016-04-21 00:11:11 +01:00
Ilya Kitaev
a213887476
transaction history api in progress
2016-04-20 13:33:54 +03:00
Ilya Kitaev
b6aaf53a60
transaction history api in progress
2016-04-20 13:17:27 +03:00
Ilya Kitaev
f83f3cbd96
api implementation splitted over separate files
2016-04-20 13:01:00 +03:00
moneromooo-monero
b0850a9bea
wallet: add a new sweep_all command and RPC command
...
This sends all outputs in a wallet to a given address, alleviating
the difficulty people have had trying to send all monero but
being left with some small amount left.
2016-04-19 21:20:27 +01:00
Ilya Kitaev
4e1c2dc365
TransactionInfo / TransactionHistory APIs design
2016-04-19 12:25:03 +03:00
awfulcrawler
68cbe1579e
modified: src/wallet/wallet2.cpp
...
modified: src/wallet/wallet2.h
Removed working comments
2016-04-18 20:20:31 +12:00
awfulcrawler
4b325bdb66
modified: src/simplewallet/simplewallet.cpp
...
modified: src/wallet/wallet2.cpp
modified: src/wallet/wallet2.h
Update to fix unconfirmed balance and give a slightly more verbose and informative confirmation message for transfers
2016-04-18 14:57:47 +12:00
Howard Chu
19fe8ae3ef
Add --restore-height option
...
For specifying the block height from which to start a restore
2016-04-17 15:25:46 +01:00
Howard Chu
b6e42c3276
Speed up new wallet refresh
...
Use the current blockchain height as the refresh_from_block_height.
2016-04-17 15:25:46 +01:00
Howard Chu
b7140daea2
Add GET_HASHES_FAST rpc, use it in wallet
...
When m_refresh_from_block_height has been set, only hashes will be
retrieved up to that height, instead of full blocks. The same will
be done for "refresh <height>" when the specified height is beyond
the current local blockchain.
2016-04-17 15:25:46 +01:00
moneromooo-monero
70c86561af
blockchain: add missing overflow check for already generated coins
...
When reaching the tail emission phase, the amount of coins will
eventually go over MONEY_SUPPLY, overflowing 64 bits. There was
a check added to blockchain_storage, but this was not ported to
the blockchain DB version.
Reported by smooth.
2016-04-17 14:46:17 +01:00
moneromooo-monero
d6fd6be5de
blockchain: update cumulative block limit when popping a block
...
Avoids possible issues with accepting a tx too large to fit
in an actual block.
Reported by smooth.
2016-04-17 14:46:13 +01:00
moneromooo-monero
7450656bf3
net_node: fix connection leak when ping fails with bad response
...
If there is no comms error, but the response is not as expected,
close would not be called.
2016-04-17 11:24:07 +01:00
moneromooo-monero
b0c18ef9cd
wallet2: move output selection api public
2016-04-17 11:20:44 +01:00
Riccardo Spagni
1c66fe04bc
Merge pull request #803
...
c33ffc8
2016-04-14 16:26:46 +09:00
Riccardo Spagni
0ecb152810
Merge pull request #785
...
1a58d20
2016-04-14 16:26:11 +09:00
Riccardo Spagni
8f78f1407e
Merge pull request #784
...
087373e
2016-04-14 16:25:53 +09:00
Riccardo Spagni
6bfb8799c3
Merge pull request #783
...
48d0747
2016-04-14 16:25:38 +09:00
Riccardo Spagni
17049fa8e8
Merge pull request #782
...
113cdc1
2016-04-14 16:25:18 +09:00
Riccardo Spagni
a299e5269b
Merge pull request #801
...
ed61a2c7385c03
2016-04-14 16:21:29 +09:00
Riccardo Spagni
784a2108f4
Merge pull request #800
...
4cfb4df
2016-04-14 16:21:08 +09:00
Riccardo Spagni
c2e9866fc6
Merge pull request #797
...
d662ab55c9dd23
2016-04-14 16:20:41 +09:00
Riccardo Spagni
da277e17b5
Merge pull request #796
...
d817aec
2016-04-14 16:20:17 +09:00
Ilya Kitaev
1774d9574b
TODOs for Transaction/Transfer interface
2016-04-12 22:30:20 +03:00
moneromooo-monero
c33ffc8e94
simplewallet: save fixes in RPC mode
...
^C when in RPC mode would not save the wallet while it was still
refreshing after starting up.
Also, save the wallet out of the signal handler. We don't want
to call complex stuff in a signal handler.
2016-04-10 16:56:12 +01:00
moneromooo-monero
f17b2f42b2
rpc: add pool/blockchain and block height results to gettransactions
2016-04-09 12:40:32 +01:00
Howard Chu
c14f9efd52
Migration
...
Migrate from DB version 0 to version 1 on startup
2016-04-08 03:11:05 +01:00
moneromooo-monero
ed61a2ccc1
simplewallet: set strict umask at start
2016-04-06 20:00:25 +01:00
moneromooo-monero
7385c036bd
util: add a function to set umask to 077
...
Useful to ensure files are written without group/other read rights.
2016-04-06 19:59:34 +01:00
moneromooo-monero
4cfb4dff3e
blockchain: remove the tx validation result cache
...
As pointed out by smooth, a transaction's validity may change
over time as the blockchain changes.
2016-04-06 19:01:28 +01:00
Ilya Kitaev
d97e9ef8a5
Transaction API continued
2016-04-06 13:56:57 +03:00
moneromooo-monero
1aad759bf1
tx_pool: fix (hopefully) save/load of kept_by_block
2016-04-06 00:11:31 +01:00
Howard Chu
d7ea7d9a23
Merge branch 'performance' into master
2016-04-05 21:13:16 +01:00
Howard Chu
372acee723
Cleanup
...
drop obsolete remove_output()
fix get_output_key(global), fix crash in blockchain_dump
2016-04-05 21:05:24 +01:00
Howard Chu
591e421875
Cleanup and clarify
...
Try to rationalize the variable names, document usage.
2016-04-05 20:57:45 +01:00
Howard Chu
b2f1c58805
Use cursors in some remove functions
...
Helps when they're called repeatedly in one txn
2016-04-05 20:57:31 +01:00
Howard Chu
118dd69dd5
Use DUPFIXED for block_info and output_txs
...
Saves another ~150MB or so on the full blockchain
2016-04-05 20:55:16 +01:00
Howard Chu
6225716f3c
More outputs consolidation
...
Also bumped DB VERSION to 1
Another significant speedup and space savings:
Get rid of global_output_indices, remove indirection from output to keys
This is the change warptangent described on irc but never got to finish.
2016-04-05 20:55:12 +01:00
Howard Chu
7c5abdc3a3
Use DUPFIXED for output_keys
...
Saves another 90MB on 200000 block import.
Had to bring back compare_uint64 for this, but it's safe since
this table is always 64-bit aligned.
2016-04-05 20:54:42 +01:00
Howard Chu
8e9d8e3364
Use DUPFIXED for tx_indices
...
Small space savings, no measurable speedup
2016-04-05 20:54:39 +01:00
Howard Chu
a12f9365f8
Use DUPFIXED for block_heights
...
Only a small savings...
2016-04-05 20:54:07 +01:00
Howard Chu
38c2277d6f
Use DUPFIXED for spent_keys
2016-04-05 20:54:07 +01:00
warptangent
bf769c32ba
Add back changes from revert.
...
m_tx_outputs doesn't need to be changed, as it's no longer dup list.
2016-04-05 20:54:07 +01:00
warptangent
46b991b362
Use MDB_APPEND mode with two tx subdbs
...
This is possible on those using a tx index as a key.
2016-04-05 20:54:07 +01:00
warptangent
9aadedb1d0
Schema update: tx_indices - consolidate the tx subdbs from 5 to 3
2016-04-05 20:54:06 +01:00
warptangent
a2f518aa01
Schema update: tx_indices - yet less indirection
2016-04-05 20:54:06 +01:00
warptangent
8d12a8df2c
Schema update: tx_indices - improve further with less indirection
2016-04-05 20:54:06 +01:00
warptangent
7c013f66e9
Add batch warning for further review
2016-04-05 20:54:06 +01:00
warptangent
ae0854a431
Schema update: tx_indices
2016-04-05 20:54:06 +01:00
Howard Chu
8d252a4214
Consolidated block info
2016-04-05 20:53:59 +01:00
warptangent
132c666f67
Update schema for "tx_outputs" to use array containing amount output indices
...
This speeds up wallet refresh by directly retrieving a tx's amount output indices.
It removes the indirection and walking the amount output duplicate list
for every amount in each requested tx.
"tx_outputs" is used by:
Amount output indices are needed for wallet refresh.
Global output indices are needed for removing a tx.
Both amount output indices and global output indices are now stored in
an array of 64-bit unsigned ints:
tx_outputs[<tx_hash>] -> [ <a1_oi, a1_gi, a2_oi, a2_gi, ...> ]
Previously it was:
tx_outputs[<tx_hash>] -> duplicate list of <a1_gi, a2_gi, a3_gi, ...>
The amount output list had to be walked for every amount in order to
find each amount's output index, by comparing the amount's global output
index with each one in the duplicate list until a match was found.
See also d045dfa7ce
2016-04-05 20:30:50 +01:00
warptangent
309f8f3d44
blockchain_utilities: Update documentation
2016-04-05 20:30:50 +01:00
luigi1111
7ac1db42c2
get_payments short ID
...
Add support for short/integrated/encrypted IDs to get_payments RPC
2016-04-05 20:30:50 +01:00
moneromooo-monero
d662ab5cec
rpc: print human readable time since received when printing pool
2016-04-05 20:16:05 +01:00
moneromooo-monero
5c9dd23b1c
rpc: add a do_not_relay boolean to tx submission
...
Just to make it easier
2016-04-05 20:15:54 +01:00
Ilya Kitaev
079fbd3d42
Wallet::createTransaction API introduced
2016-04-05 15:24:44 +03:00
moneromooo-monero
d817aeca80
tx_pool: ensure no txes that fail check_inputs get in the block template
2016-04-05 13:06:29 +01:00
Ilya Kitaev
ee5bb17f26
Wallet::transfer() continued
2016-04-04 14:56:17 +03:00
Ilya Kitaev
c37c856d6d
Wallet::transfer in progress
2016-04-03 14:34:38 +03:00
moneromooo-monero
1a58d202b2
simplewallet: optional address in --generate-from-json
...
When present, it can be used to validate the keys, as well
as deduce the spend key, if it is absent (watch wallet).
2016-04-02 15:22:59 +01:00
moneromooo-monero
087373eccf
Fix potential race with parallel processing of txes/signatures/blocks
2016-04-02 14:20:51 +01:00
moneromooo-monero
48d0747d00
wallet: better output selection for transfer/transfer_new
...
This now requests the set of outputs that can be mixed first,
to avoid trying non dust but unmixable outputs, which we know
will fail.
2016-04-02 14:17:02 +01:00
moneromooo-monero
113cdc10a2
core: keep the acc loop for the genesis block
...
For unknown reasons, it was generated with a block reward
consisting of a single large dusty output.
2016-04-02 11:17:49 +01:00
Riccardo Spagni
a42e19e1b7
bumped version number
2016-04-02 12:21:59 +09:00
Riccardo Spagni
cc54e2764a
Merge pull request #779
...
daac1cc
2016-04-02 12:05:57 +09:00
Riccardo Spagni
dea1aa75bc
Merge pull request #778
...
efbdde2
2016-04-02 12:05:40 +09:00
Riccardo Spagni
ab43e80331
Merge pull request #777
...
8757e46
2016-04-02 12:05:07 +09:00
Riccardo Spagni
b22f550c67
Merge pull request #772
...
ead6956
2016-04-02 12:03:25 +09:00
Riccardo Spagni
4ac6bdbb3f
Merge pull request #769
...
b4eada93e55725f8d05f3
2016-04-02 12:02:49 +09:00
Riccardo Spagni
a38ad63f8f
Merge pull request #767
...
24b3e90
2016-04-02 12:02:07 +09:00
Riccardo Spagni
f68670a80e
Merge pull request #766
...
77d1c6b
2016-04-02 12:01:29 +09:00
Riccardo Spagni
44559ca4b0
Merge pull request #764
...
f746c9dc6bb201
2016-04-02 12:01:15 +09:00
moneromooo-monero
daac1cc259
core: remove the block reward accumulation loop
...
This can generate non decomposed outputs for very large block
rewards (or not so large ones if a miner decides to not quantize
the block rewards). Out of an abundance of caution, we refuse
to generate those. They are still accepted by the consensus code,
however.
2016-04-01 21:42:19 +01:00
Ilya Kitaev
830c19c934
Wallet::refresh + tests
2016-03-31 16:38:57 +03:00
Ilya Kitaev
1ae9cdc6bf
"testnet" is default parameter
2016-03-31 15:39:28 +03:00
Ilya Kitaev
2157a9ac48
testnet option, Wallet::balance(), Wallet::unlockedBalance()
2016-03-31 12:48:41 +03:00
Ilya Kitaev
df6026182a
Merge remote-tracking branch 'upstream/master'
2016-03-31 12:01:19 +03:00
Howard Chu
efbdde2c66
Detect map resize failures
2016-03-30 20:37:28 +01:00
Thomas Winget
f746c9d01b
minor corrections/clarifications
2016-03-30 11:55:54 -04:00
Howard Chu
8757e46b78
add blockhashing blob to getblocktemplate
2016-03-30 16:54:36 +01:00
moneromooo-monero
ead6956080
simplewallet: always gracefully exit on EOF
2016-03-29 17:52:45 +01:00
moneromooo-monero
ef4ff4252a
connection_basic: avoid gratuitous exception
...
The remote endpoint is usually invalid, so use a version of the
call that returns an error code instead.
2016-03-28 18:59:09 +01:00
moneromooo-monero
878ab5d896
wallet: fix --generate-from-keys saving as watch only
2016-03-28 16:46:37 +01:00
moneromooo-monero
b4eada907c
wallet: make load_keys check types when loading JSON
2016-03-27 23:39:34 +01:00
moneromooo-monero
3e557254c7
wallet: make the JSON reading type safe
2016-03-27 23:39:17 +01:00
moneromooo-monero
f8d05f3cd9
common: new json_util.h
...
With code to help factor out reading typed fields from JSON
2016-03-27 23:35:32 +01:00
Riccardo Spagni
2b57845766
Merge pull request #765
...
d5d46e625672d30be6e0812146da600a3cff9a2fd2f26651a
2016-03-27 14:09:53 +02:00
moneromooo-monero
24b3e9007a
Convey tx verification failure reasons to the RPC client
...
This allows appropriate action to be taken, like displaying
the reason to the user.
Do just that in simplewallet, which should help a lot in
determining why users fail to send.
Also make it so a tx which is accepted but not relayed is
seen as a success rather than a failure.
2016-03-27 12:37:18 +01:00
moneromooo-monero
77d1c6b672
simplewallet: default to trusted daemon for loopback address
2016-03-27 11:00:15 +01:00
moneromooo-monero
25672d3f10
wallet: pass std::function by const ref, not value
...
Because we can.
2016-03-26 23:32:45 +00:00
moneromooo-monero
0be6e08dd0
wallet: do not leak owned amounts to the daemon unless --trusted-daemon
...
This will be slower, though more private.
New trusted_daemon parameter to the matching RPC call, false by default.
2016-03-26 23:29:29 +00:00
moneromooo-monero
12146daeed
wallet: change sweep_dust to sweep_unmixable
...
With the change in mixin rules for v2, the "annoying" outputs are
slightly changed. There is high correlation between dust and
unmixable, but no equivalence.
2016-03-26 21:15:47 +00:00
moneromooo-monero
600a3cf0c0
New RPC and daemon command to get output histogram
...
This is a list of existing output amounts along with the number
of outputs of that amount in the blockchain.
The daemon command takes:
- no parameters: all outputs with at least 3 instances
- one parameter: all outputs with at least that many instances
- two parameters: all outputs within that many instances
The default starts at 3 to avoid massive spamming of all dust
outputs in the blockchain, and is the current minimum mixin
requirement.
An optional vector of amounts may be passed, to request
histogram only for those outputs.
2016-03-26 21:10:43 +00:00
moneromooo-monero
f9a2fd2ff5
wallet: handle rare case where fee adjustment can bump to the next kB
...
It resulted in a tx being sent with too low a fee, and thus rejected.
2016-03-26 11:51:58 +00:00
moneromooo-monero
f26651ab8a
wallet: factor fee calculation
2016-03-26 11:44:43 +00:00
moneromooo-monero
b8527668ff
blockchain: for v3, require miner tx to have well behaved outs
...
This was meant to go in v2, but the miner tx slipped through
the cracks as it doesn't go through the main tx verification
since it doesn't get added to the pool.
2016-03-25 15:11:53 +00:00
moneromooo-monero
97638b1fb7
core: fix miner tx block reward with fees
2016-03-25 15:11:45 +00:00
Ilya Kitaev
8790904cf9
- testnet option added to api;
2016-03-25 17:06:30 +03:00
Riccardo Spagni
287e88283c
remove connectivity tool, comment it out from munin plugins too
2016-03-25 14:52:19 +02:00
Riccardo Spagni
0d30b65785
Merge pull request #749
...
bfd4a28797357ec83521550dba6d8ac329d540a76c1b0c98e89c24acab0ed143a48449
2016-03-25 09:12:25 +02:00
Riccardo Spagni
01e0a69c17
Revert "Merge pull request #749 "
...
This reverts commit 7fa63a82a1cb6be986c3
2016-03-25 08:42:42 +02:00
Riccardo Spagni
40b8a5f327
Merge pull request #756
...
a2e378b
2016-03-25 08:27:42 +02:00
Riccardo Spagni
7fa63a82a1
Merge pull request #749
...
bfd4a28797357ec83521550dba6d8ac329d540a76c1b0c98e89c24acab0ed143a48449
2016-03-25 08:22:06 +02:00
Riccardo Spagni
cb6be986c3
Merge pull request #748
...
cc4b19c
2016-03-25 08:20:56 +02:00
moneromooo-monero
a2e378b91b
wallet: add a --generate-from-json flag
...
It takes a filename containing JSON data to generate a wallet.
The following fields are valid:
version: integer, should be 1
filename: string, path/filename for the newly created wallet
scan_from_height: 64 bit unsigned integer, optional
password: string, optional
viewkey: string, hex representation
spendkey: string, hex representation
seed: string, optional, list of words separated by spaces
Either seed or private keys should be given. If using private
keys, the spend key may be omitted (the wallet will not be
able to spend, but will see incoming transactions).
If scan_from_height is given, blocks below this height will not
be checked for transactions as an optimization.
2016-03-25 00:56:11 +00:00
Thomas Winget
c6bb201a07
Transaction pool documentation (and some cleanup)
...
tx_pool.h doxygen documentation completed.
Many notes made on areas for improvement, be that functionality or
code clarity.
Commented code and unused code removed.
2016-03-24 20:03:02 -04:00
Thomas Winget
bfd4a28c41
Update BlockchainDB documentation
...
BlockchainDB is now Doxygen-compliant and its documentation is
up-to-date with recent changes.
2016-03-24 03:40:04 -04:00
Thomas Winget
c835215ea9
remove defunct code from cryptonote::core
2016-03-24 03:39:58 -04:00
Thomas Winget
50dba6d301
cryptonote::core doxygen documentation
2016-03-24 03:39:55 -04:00
Thomas Winget
8ac329df02
doxygen documentation for difficulty functions
2016-03-24 03:39:52 -04:00
Thomas Winget
540a76c5c2
Move checkpoint functions into checkpoints class
...
The functions in src/cryptonote_core/checkpoints_create.{h,cpp} should
be member functions of the checkpoints class, if nothing else for the
sake of keeping their documentation together.
This commit covers moving those functions to be member functions of the
checkpoints class as well as documenting those functions.
2016-03-24 03:39:41 -04:00
Thomas Winget
1b0c98e7e9
doxygen documentation for checkpoints.{h,cpp}
...
All functions in src/cryptonote_core/checkpoints.h are now documented in
doxygen style.
checkpoints.cpp has been reviewed, one function has been marked for
discussion on correctness.
2016-03-22 20:23:15 -04:00
Thomas Winget
89c24ac2be
Remove unnecessary or defunct code
2016-03-22 20:23:06 -04:00
Thomas Winget
3a484497bc
Updated documentation for blockchain.*
...
All functions are now documented in doxygen format. Comments have been
updated to reflect the current state of the code. Many areas for
improvement in clarity and design have been noted, as well as cruft to
be removed. These changes are not reflected in this commit both to
allow time for comment and to keep commits organized by purpose.
2016-03-22 17:30:21 -04:00
moneromooo-monero
cc4b19c32e
blockchain: fix partial block reward detection
2016-03-22 15:37:16 +00:00
Riccardo Spagni
8438aeb740
update version number
2016-03-21 23:10:48 +02:00
Ilya Kitaev
2cce32995b
wallet2::store() implemented within wallet2::store_to
2016-03-21 16:17:03 +03:00
Riccardo Spagni
bdc07f029a
Merge pull request #743
...
a1c3829
2016-03-21 13:22:54 +02:00
Riccardo Spagni
a1c38299b3
also maybe do the block height this time, you know, just so that it actually works.
2016-03-21 13:19:49 +02:00
Riccardo Spagni
93c2c1b4ba
Merge pull request #742
...
23d1538
2016-03-21 13:14:27 +02:00
Riccardo Spagni
23d1538fe7
also update the timestamp for the hard fork
2016-03-21 13:09:35 +02:00
Riccardo Spagni
def05d6353
Merge pull request #741
...
eda51a0
2016-03-21 12:56:11 +02:00
Riccardo Spagni
eda51a0dc3
set fork date for September, add hyc's GPG key, remove aabramov's
2016-03-21 12:53:49 +02:00
moneromooo-monero
f7301c3563
Revert "Print stack trace upon exceptions"
...
Ain't nobody got time for link/cmake skullduggery.
This reverts commit fff238ec94
2016-03-21 10:12:23 +00:00
Riccardo Spagni
37fbb7a8b7
Merge pull request #738
...
79117d4
2016-03-20 21:29:11 +02:00
Riccardo Spagni
ec4186a30c
Merge pull request #737
...
1c3ed4c
2016-03-20 21:28:45 +02:00
Riccardo Spagni
9b10e9cc75
Merge pull request #735
...
d2aa427
2016-03-20 21:27:28 +02:00
Riccardo Spagni
f63b945d28
Merge pull request #734
...
b525457
2016-03-20 21:27:06 +02:00
moneromooo-monero
79117d4275
db_lmdb: include the error codes from lmdb api in error logs
2016-03-20 18:06:04 +00:00
moneromooo-monero
1c3ed4c9da
cryptonote_protocol: clarify height wording
...
It's logging the blockchain height, not the top block height
2016-03-20 12:35:53 +00:00
moneromooo-monero
d2aa427c78
rpc: fix print_tx in command line mode
...
It was only filling the input in non rpc mode
2016-03-19 23:58:30 +00:00
moneromooo-monero
b525457061
simplewallet: make --password-file work in RPC mode
2016-03-19 22:18:47 +00:00
moneromooo-monero
fff238ec94
Print stack trace upon exceptions
...
Useful for debugging users' logs
2016-03-19 21:48:36 +00:00
Howard Chu
db1b2db4d5
Reduce log noise
2016-03-19 12:59:05 +00:00
Howard Chu
9b3e43c327
Fix issue #706
2016-03-19 12:57:47 +00:00
Riccardo Spagni
435b6e4e32
bump the version
2016-03-16 22:00:50 +02:00
Riccardo Spagni
e4c2e9e5e0
baked-in block headers now go all the way up to 1 million. 1 MILLION
2016-03-16 21:59:21 +02:00
Riccardo Spagni
4d34682883
Merge pull request #728
...
7df2baf62606f119fcc74180ac6e5a4f09957d7ffcf1f9279930bed7318660d
2016-03-16 19:49:48 +02:00
Howard Chu
a74348e115
Add destructor for readtxns
...
Only if we created the readtxn. Was missing cleanups from exceptions before.
2016-03-16 11:34:13 +00:00
Ilya Kitaev
62606f11f5
Wallet::store_to(path, password) implemented;
2016-03-16 14:29:06 +03:00
Ilya Kitaev
19fcc74912
Wallet::address implemented
2016-03-16 14:29:06 +03:00
Ilya Kitaev
180ac6e438
WalletManager::recoveryWallet implemented
2016-03-16 14:29:06 +03:00
Ilya Kitaev
5a4f099540
Wallet::setPassword() method for wallet2_api
2016-03-16 14:29:06 +03:00
Ilya Kitaev
57d7ffc4d6
changes in wallet2_api + implemented WalletManager::openWallet
2016-03-16 14:27:57 +03:00
Ilya Kitaev
f1f9279d90
get_seed() included to interface
2016-03-16 14:27:57 +03:00
Ilya Kitaev
930bed7074
tests for wallet2_api
2016-03-16 14:27:57 +03:00
Ilya Kitaev
318660dd89
wallet2 public api. initial commit
2016-03-16 14:27:57 +03:00
Riccardo Spagni
057a019e41
Merge pull request #727
...
6b0a90301c151292dd4ec6d6
2016-03-15 23:50:58 +02:00
Howard Chu
6b0a903177
Small cleanups
...
Only one return and TXN_POSTFIX_RDONLY() per function
Only log rtxn_start if the rtxn wasn't already active
2016-03-15 13:35:31 +00:00
Howard Chu
01c1512f22
More for 92dd4ec6d6
...
Make sure we stop the right txn too
2016-03-15 13:35:23 +00:00
Mike C
5dd91f6332
fix formatting error on bitmonero print_block return
...
Example of current return for `print_block 912345`:
timestamp: 1452793716
previous hash:
b61c58b2e0be53fad5ef9d9731a55e8a81d972b8d90ed07c04fd37ca6403ff78
nonce: 1646
is orphan: 0
height: 912345
depth: 85434
hash:
e22cf75f39ae720e8b71b3d120a5ac03f0db50bba6379e2850975b4859190bc6difficul
ty: 815625611
reward: 7388968946286
{
"major_version": 1,
"minor_version": 2,
…
Without `std::endl`, the difficulty gets smashed on the end of the hash.
2016-03-14 23:31:09 -06:00
Mike C
ee71946cdc
Fix typo on bitmonerod rpc method error.
2016-03-14 23:09:21 -06:00
Riccardo Spagni
240a50f3fb
Merge pull request #723
...
2abdb2c
2016-03-14 22:20:42 +02:00
Howard Chu
92dd4ec6d6
Hack for read/write txn mixup
...
save the thread ID of the writer thread so we don't try to use
the writetxn from reader threads
2016-03-14 20:19:46 +00:00
Howard Chu
2abdb2c9fd
avoid some val copies
2016-03-14 09:40:49 +00:00
Riccardo Spagni
8689014eda
switch default utilities DB to lmdb, update checkpoints.dat
2016-03-12 21:09:44 +02:00
Riccardo Spagni
dd3cd9e7b8
Merge pull request #718
...
41ea91a
2016-03-12 16:25:35 +02:00
Riccardo Spagni
853f80e23a
Merge pull request #717
...
28bfc90
2016-03-12 16:21:53 +02:00
moneromooo-monero
41ea91a97a
simplewallet: fix hang when setting auto-refresh to 0
...
It would try to join the auto refresh thread, which would
only happen after it was done, which would take a long time
when doing so on a newly created wallet.
2016-03-12 14:21:34 +00:00
Riccardo Spagni
b66d455536
Merge pull request #716
...
789e275474e4c0
2016-03-12 16:21:20 +02:00
Riccardo Spagni
bb7b31d5ed
Merge pull request #715
...
8bc1bd631d2e0f
2016-03-12 16:14:07 +02:00
moneromooo-monero
28bfc903b9
simplewallet: special ^C handling for windows
...
Because obviously it doesn't work as other POSIX platforms.
Reported and tested by luigi1111.
2016-03-12 14:05:25 +00:00
moneromooo-monero
789e2755f7
rpc: do not return bans if they're effectively spent
...
The blocked ip list will still hold them till next time
a connection attempt is made with that IP, so the effective
length of the ban may be negative.
2016-03-12 13:49:08 +00:00
moneromooo-monero
474e4c00f0
p2p: lock access to the blocked ips map
2016-03-12 13:48:58 +00:00
moneromooo-monero
8bc1bd6b65
wallet: use minimum mixin when RPC asks for too low mixin
...
After the fork, normal transfer functions called via RPC
use the minimum mixin 2 if 0 or 1 is requested. While the
incoming transaction may be valid (eg, it has an unmixable
and at most a mixable input), it is a simple way to make
sure RPC users can't get a seemingly random accept/reject
behavior if they don't update their requested mixin.
2016-03-11 21:32:16 +00:00
moneromooo-monero
31d2e0f84d
wallet_rpc_server: make use_fork_rules public
...
We will need it in the wallet RPC server
2016-03-11 21:31:50 +00:00
Riccardo Spagni
0a4dd68c17
minor tweaks, add readme for crypto_ops_builder
2016-03-11 22:48:46 +02:00
Riccardo Spagni
dfd0e9c97d
Merge pull request #712
...
66c2fc7b937a2c
2016-03-11 20:15:10 +02:00
Howard Chu
66c2fc7b70
Need to link boost::chrono in more places now
2016-03-11 16:17:08 +00:00
Howard Chu
b937a2c915
Use boost::thread instead of std::thread
...
and all other associated IPC
2016-03-11 15:09:50 +00:00
Howard Chu
8941ce0398
More for bdec7cb
...
More uses of db error helper
2016-03-09 18:24:16 +00:00
Riccardo Spagni
b96147030c
Merge pull request #705
...
f7ed167
2016-03-05 23:14:06 +02:00
Riccardo Spagni
d0f011d873
Merge pull request #704
...
e2b7e55
2016-03-05 23:13:23 +02:00
Riccardo Spagni
93605eb05f
Merge pull request #702
...
0485d1741487e3
2016-03-05 23:12:05 +02:00
warptangent
f7ed167fc0
blockchain_utilities: Update documentation
2016-03-05 13:11:44 -08:00
Riccardo Spagni
32dc08d19a
Merge pull request #700
...
bdec7cbc5932eba49c355
2016-03-05 23:10:38 +02:00
Riccardo Spagni
c3af15702f
Merge pull request #698
...
ee7a8b8
2016-03-05 23:06:26 +02:00
Riccardo Spagni
14c1e214ad
Merge pull request #696
...
d57ec75
2016-03-05 23:06:04 +02:00
luigi1111
e2b7e55be6
get_payments short ID
...
Add support for short/integrated/encrypted IDs to get_payments RPC
2016-03-05 13:30:48 -06:00
warptangent
0485d17274
blockchain_export: Support BerkeleyDB
...
TEST:
blockchain_export -h
This should show "berkeley" as an available option to --database.
With an existing BerkeleyDB database, run:
blockchain_export --database berkeley
2016-03-05 06:46:11 -08:00
warptangent
41487e32be
blockchain_export: Move DB implementation includes
2016-03-05 06:46:09 -08:00
warptangent
bdec7cbfb3
BlockchainLMDB: Use DB error helper consistently
2016-03-03 21:27:13 -08:00
warptangent
c5932eb5ea
BlockchainLMDB: Add DB error to exception
2016-03-03 20:15:37 -08:00
warptangent
a49c355cae
Blockchain: Omit verbose time stats messages by default
...
This is already the default for the daemon, but by checking a command
line argument and calling a Blockchain member function setter.
Initialize the variable to false so it's not dependent on an external
command-line argument check. This allows utilities like
blockchain_import to have a reasonable default without code changes.
2016-03-03 20:14:48 -08:00
Howard Chu
ee7a8b87f9
Get rid of lmdb_cur
...
We don't need it now with per-txn cursors.
2016-03-03 19:06:27 +00:00
Howard Chu
d57ec7595c
Fix language
2016-03-03 00:34:19 +00:00
Howard Chu
f5affbef26
More for df239428c0
...
Let ARMv7 work again
2016-03-03 00:13:13 +00:00
warptangent
2c823c1589
Make partial revert consistent
...
If user-defined comparator is used, subdb shouldn't be opened with
MDB_INTEGERKEY.
TODO: Again, this will be added back with future schema updates.
2016-03-01 02:47:16 -08:00
warptangent
df239428c0
Revert part of 7db89ed2ee
...
For now, so existing databases work.
TODO: add these back with future schema updates.
2016-02-29 18:03:41 -08:00
warptangent
c9c4060dc6
BlockchainLMDB: Add height and db error to exception
2016-02-29 17:52:54 -08:00
Riccardo Spagni
bf09285443
Merge pull request #688
...
c2a1fee4513b4c
2016-02-29 17:30:29 -05:00
Riccardo Spagni
c3c4e28061
Merge pull request #687
...
5e3557d
2016-02-29 17:30:10 -05:00
Riccardo Spagni
d60bf4ee36
Merge pull request #686
...
7db89ed5a07cef8cc7a3686a7f2bea5fa5e
2016-02-29 17:29:26 -05:00
moneromooo-monero
c2a1fee428
simplewallet: prompt for private keys when generating wallets
...
instead of supplying them on the command line. It's more
unwieldy, but better protects against information leaks.
2016-02-27 11:53:11 +00:00
Howard Chu
7db89ed2ee
ARMv7: fix unaligned accesses
...
And cleanup some key comparators
2016-02-25 13:57:00 +00:00
Howard Chu
5a07cefe7b
Wrap some more actions in a larger read txn
2016-02-23 20:47:15 +00:00
Howard Chu
8cc7a36f0b
read txn/cursor stuff
...
Could wrap more later.
2016-02-23 20:47:15 +00:00
moneromooo-monero
86a7f2b1e7
core: check whether an update is needed straight away
2016-02-23 20:29:17 +00:00
moneromooo-monero
ea5fa5e9b6
core: print "update needed" hard fork notifications in red
2016-02-23 20:29:17 +00:00
moneromooo-monero
283894d8ff
dns_utils: const compatibility with older libunbound
...
https://www.nlnetlabs.nl/bugs-script/show_bug.cgi?id=515
2016-02-23 19:02:05 +00:00
moneromooo-monero
4513b4cd2b
simplewallet: add a new --restore-from-keys option
...
It is similar in use to --restore-from-view-key, but also expects
a spend private key.
Requested by luigi1112, and useful to restore MyMonero wallets.
2016-02-22 22:10:55 +00:00
moneromooo-monero
5e3557d2c3
move g_test_dbg_lock_sleep from a global to a function level static
...
This avoids the need to define that variable in every program
which uses epee.
2016-02-22 19:34:09 +00:00
moneromooo-monero
0eb4d054f6
db_bdb: add missing include for std::condition_variable
2016-02-20 15:38:43 +00:00
Riccardo Spagni
81a93cd171
Merge pull request #680
...
360f72f
2016-02-20 17:11:31 +02:00
Riccardo Spagni
c3baa82ac8
Merge pull request #678
...
11d555c014f8867c86c59
2016-02-20 17:10:51 +02:00
Riccardo Spagni
a903d9c3f6
Merge pull request #677
...
57e75fa47f6cf8
2016-02-20 17:09:49 +02:00
moneromooo-monero
360f72fa90
simplewallet: wording change for single tx confirmation
2016-02-20 11:17:28 +00:00
Howard Chu
014f8868f2
std::condvar is broken on Win32 with gcc/g++ 4.8 too
...
Use boost...
2016-02-18 21:31:21 +00:00
Howard Chu
7c86c5997d
Use boost::thread instead of std::thread
...
std::thread crashes on (at least) ARMv6 g++ 4.8/4.9
2016-02-18 21:30:10 +00:00
warptangent
57e75fa33f
BlockchainBDB: Check if hard fork subdbs need reset
...
See f7e337e625
2016-02-18 06:38:56 -08:00
warptangent
47f6cf8bea
BlockchainBDB: Support blockchain_import --drop-hard-fork command
...
See c657e772c4
2016-02-18 06:37:45 -08:00
warptangent
d258f6e63a
blockchain_import: Pass ARCH_WIDTH macro if 32-bit or not.
...
This also avoids warnings.
2016-02-18 06:14:35 -08:00
Riccardo Spagni
1889c0e81c
Merge pull request #675
...
27d4e508892173
2016-02-18 10:01:37 +02:00
Riccardo Spagni
43fe8c4933
Merge pull request #674
...
05e7ac0
2016-02-18 10:01:01 +02:00
moneromooo-monero
27d4e50dfa
core: check whether an update is needed straight away
2016-02-17 22:57:38 +00:00
moneromooo-monero
889217381f
core: print "update needed" hard fork notifications in red
2016-02-17 22:57:14 +00:00
Howard Chu
9218cad640
Fix cffc411c90
...
Don't include bdb header unless defined(BERKELEY_DB)
2016-02-17 20:41:34 +00:00
warptangent
05e7ac0360
blockchain_import: Check bit width for more than just WIN32
...
Pass the CMake bit width setting to compile flags for blockchain_import
and blockchain_converter.
For LMDB on 32-bit, hyc has found that batch size of 100 appears to be a
good default.
2016-02-17 12:37:15 -08:00
Howard Chu
02abe3590d
Use MDB_PREV_MULTIPLE
...
in get_global_output_indices
2016-02-17 16:14:50 +00:00
Howard Chu
7a4755d3a4
Fixup after lmdb master resync
2016-02-17 16:14:38 +00:00
Riccardo Spagni
c069814773
Merge pull request #672
...
3b13a741537477f2faf8c090b548ed08d210fc9334
2016-02-17 17:10:07 +02:00
Riccardo Spagni
6636b0a6da
Merge pull request #671
...
8f09b71
2016-02-17 17:09:48 +02:00
Riccardo Spagni
3225a7d28d
Merge pull request #666
...
27f76e21aa8a9dcffc41119c1aaa0fedce0
2016-02-17 17:09:21 +02:00
Howard Chu
3b13a7473e
Shutup about VERSION 0
2016-02-17 05:06:19 +00:00
Howard Chu
1537477c9f
Use cursor in get_output_key
2016-02-17 04:05:29 +00:00
Howard Chu
f2faf8cdd9
Use MDB_APPEND mode where possible
...
When keys are contiguous and monotonically increasing, this gets
denser page utilization (doesn't leave padding in page splits).
Can't be used for keys that are inserted in random order (e.g. hashes)
In total this only saves around 1.5% of space compared to original
DB code. The previous patch accounted for 0.8% savings on its own;
the blocks tables just aren't that big.
2016-02-17 04:05:29 +00:00
Howard Chu
090b548c3b
Use cursors in write txns
...
Saves a bit of seek overhead. LMDB frees them automatically
in txn_(commit|abort) so they need no cleanup.
2016-02-17 04:05:29 +00:00
Howard Chu
ed08d2152e
Keep a running blocksize count
...
Used in batch size estimation, avoids rereading already processed
blocks during import
2016-02-17 04:05:28 +00:00
Howard Chu
0fc93345ea
Win32 import batchsize tweaks
...
Reduce frequency of resizes: bump minimum increase from 128MB to 512MB
Use a bigger safety margin at small batch sizes
2016-02-17 04:05:28 +00:00
moneromooo-monero
8f09b71b9b
wallet: clear missing data on rescan_bc
2016-02-15 20:51:30 +00:00
warptangent
27f76e2ee4
blockchain_import: Build string for db type list
2016-02-14 16:25:35 -08:00
warptangent
1aa8a9d26f
blockchain_import: Add mode argument representing multiple DB flags
...
These modes match those optionally provided as part of the daemon's
--db-type argument.
Argument after the # is interpreted as a composite mode if there's only
one (no comma separated arguments).
Sample usage:
blockchain_import --database lmdb#fastest
blockchain_import --database berkeley#fastest
Multiple specific DB flags are still supported, e.g.
blockchain_import --database lmdb#nosync,nordahead
blockchain_import --database berkeley#txn_nosync
2016-02-14 16:25:35 -08:00
Howard Chu
d8f9bb380c
Keep a running blocksize count
...
Used in batch size estimation, avoids rereading already processed
blocks during import
2016-02-15 00:22:09 +00:00
warptangent
cffc411c90
blockchain_import: Support BerkeleyDB
2016-02-14 16:02:38 -08:00
warptangent
19c1aaa9f6
blockchain_import: Add database type argument
...
Default to LMDB.
2016-02-14 16:02:37 -08:00
warptangent
0fedce00d5
blockchain_import: Make LMDB-specific names general
...
Also update terms to better distinguish blockchain management/engine
from database type.
2016-02-14 16:02:37 -08:00
Howard Chu
bf22109d16
Win32 import batchsize tweaks
...
Reduce frequency of resizes: bump minimum increase from 128MB to 512MB
Use a bigger safety margin at small batch sizes
2016-02-14 19:31:52 +00:00
Riccardo Spagni
63e2d4195b
Merge pull request #657
...
1995923c16cc209118d0af5581c3
2016-02-13 19:54:47 +02:00
Riccardo Spagni
354d478286
Merge pull request #656
...
9832d18c2f243772052103e72d97
2016-02-13 19:51:56 +02:00
Riccardo Spagni
999992a64b
Merge pull request #652
...
c7e6b7774aef21
2016-02-13 19:51:30 +02:00
warptangent
1995923559
BlockchainLMDB: Deal with DB exceptions at block level with particularity
...
Add another DB error exception type to distinguish failed txn setup from
general use of txn.
This keeps the error handling flow the same as before the block-level
txn setup changes that moved control up a layer to BlockchainDB.
2016-02-13 05:12:39 -08:00
warptangent
c16cc204d3
BlockchainLMDB: Add sanity check for inconsistent state
...
This hasn't been known to occur in block-level txn abort, but throw
exception if it does.
2016-02-13 04:17:37 -08:00
warptangent
9118d0a44c
BlockchainLMDB: Call destructor on allocated txn if setup fails
2016-02-13 04:17:37 -08:00
warptangent
f5581c3536
BlockchainLMDB: Replace remaining txn pointer NULLs with nullptr
...
For consistency.
2016-02-13 04:17:36 -08:00
warptangent
3e72d97ca7
cmake: Fix overly broad use of dynamic link settings
...
Remove LINK_SEARCH_START_STATIC and LINK_SEARCH_END_STATIC. This is more
appropriate when the compiler flag -static is used.
This had been causing CMake to omit the linker flags necesssary to
distinguish static and dynamic library linking. CMake had assumed static
linking for the target, causing it to omit explicit static link flags.
That is problematic without the -static compile flag being set.
With a library located in system directories, like libboost_date_time,
the full static path (.a), though found correctly by CMake, was treated
by the linker as a dynamic library. This is because
target_link_libraries() transforms the full path to -l<libname> if it's
in a system directory. Without -static or explicit linker flags, the
dynamic library (.so) is linked.
Removing the above two properties removes the assumption of static. So
-Wl;-Bstatic is inserted where needed. This causes -l<libname> to
properly refer to the static library instead of dynamic.
2016-02-12 14:49:43 -08:00
moneromooo-monero
c7e6b77395
crypto: only check MONERO_USE_SOFTWARE_AES once
2016-02-09 09:38:17 +00:00
moneromooo-monero
74aef213fe
crypto: use software AES based on the MONERO_USE_SOFTWARE_AES env var
...
Setting to no or 0 also works. If set, any other value enables it.
Useful for running with valgrind in cases where it fails at
properly implementing AES-NI.
2016-02-09 09:30:34 +00:00
moneromooo-monero
759383c52d
hardfork: add a default fork entry for v1 if none exist
...
To avoid special cases
2016-02-08 20:58:06 +00:00
moneromooo-monero
c7f82ec769
blockchain: initialize m_hardfork to NULL
...
It can now be set by some other code, and is thus tested
2016-02-08 20:57:20 +00:00
moneromooo-monero
8649b9f1ef
blockchain_db: pass hard fork object as a simple pointer
2016-02-08 20:56:31 +00:00
moneromooo-monero
a333c42cde
core_tests: add tests for hard fork behaviors (MRL-0004)
...
We also replace the --fakechain option with an optional structure
containing details about configuration for the core/blockchain,
for test purposes. This seems more future friendly.
2016-02-08 18:52:00 +00:00
moneromooo-monero
9ef57946a0
blockchain_utilities: remove unused num_blocks variable
2016-02-08 18:26:03 +00:00
moneromooo-monero
6c8e5c3459
blockchain: reset hardfork object when resetting blockchain
...
Not doing so will prevent the new genesis block from being
reset if a switch past v1 had occured already.
2016-02-08 18:22:03 +00:00
warptangent
e298b14a55
Blockchain: Update comments on removing block
2016-02-08 09:28:25 -08:00
warptangent
b368e29f67
blockchain_import: Get hard fork version from HardFork
...
Replace temporary assignment that used hardcoded values.
2016-02-08 09:28:21 -08:00
warptangent
e02577f594
Move HardFork DB update to BlockchainDB::add_block()
...
Ensures the database is consistent.
Also simplifes blockchain_import in that verify mode off has less to
work around.
2016-02-08 09:28:19 -08:00
warptangent
3800875406
Make HardFork object available to BlockchainDB and derived DB implementations
...
This will later allow the HardFork object's DB update functions to be
called when the DB transaction that persists across block add/remove is
open.
2016-02-08 09:28:17 -08:00
warptangent
fd46c96dce
BlockchainDB/LMDB: Refactor block-scope DB txn handling for add block
...
Move block-scope txn start and stop from BlockchainLMDB to BlockchainDB.
2016-02-08 09:28:15 -08:00
warptangent
f3a6000094
BlockchainDB/LMDB/BDB: Extract DB txn functions for block add/remove
2016-02-08 09:28:14 -08:00
warptangent
f47d5b0fe3
BlockchainLMDB: Allow two HardFork functions to update DB during block add
...
Note that this doesn't yet cause them to be called during block add.
2016-02-08 09:28:12 -08:00
warptangent
15ee0bef4b
BlockchainLMDB: extract txn macros used during block add/remove
2016-02-08 09:28:10 -08:00
warptangent
9d62c161a3
blockchain_import: Add hard fork data for each block when verify mode is off
2016-02-08 08:50:59 -08:00
warptangent
7006b2ebe1
blockchain_utilities: Have fake_core create HardFork object
...
The HardFork object is needed for the importer to update the hard fork
data when verify mode is off.
2016-02-08 08:50:53 -08:00
warptangent
8f863e742d
Blockchain: Optionally pass in HardFork object
2016-02-08 08:50:51 -08:00
warptangent
f7e337e625
fake_core: Check if hard fork subdbs need reset at start
2016-02-08 08:50:48 -08:00
warptangent
c657e772c4
blockchain_import: Add --drop-hard-fork command
2016-02-08 08:50:47 -08:00
warptangent
412243901d
blockchain_import: Add exception to log output
2016-02-08 08:50:27 -08:00
Riccardo Spagni
1cfe0bdbef
Merge pull request #648
...
f6abc53
2016-02-08 18:34:40 +02:00
Riccardo Spagni
0c4222158f
Merge pull request #646
...
c7b96b9
2016-02-08 18:34:13 +02:00
Riccardo Spagni
a1a5b810bc
Merge pull request #645
...
d9f4b39
2016-02-08 18:33:30 +02:00
Riccardo Spagni
de78962e1c
Merge pull request #643
...
05bfb51
2016-02-08 18:32:08 +02:00
Riccardo Spagni
cea6f6fb9c
Merge pull request #641
...
7658ac03a0f4d81642be2098dcf2
2016-02-08 18:31:42 +02:00
moneromooo-monero
f6abc5324f
simplewallet: check watch-only view key matches standard address
2016-02-05 22:41:45 +00:00
moneromooo-monero
d9f4b395e8
daemon: remove leftover debug log
2016-02-05 16:36:28 +00:00
moneromooo-monero
c7b96b91ed
wallet: check a key image isn't already present when adding one
...
If it is, it points to reuse of a tx key, which isn't meant to happen.
If it does, a key image collision means that only one of those
outputs is spendable, so the wallet selects the larger amount,
unless that output was spent already.
This causes a discrepancy betewen reported received inputs and
payment total.
Since tx keys are 256 bits, this should never happen except if
done on purpose, or if a sender uses a bad PRNG.
2016-02-05 16:24:23 +00:00
moneromooo-monero
05bfb51d3e
core: move the db lock to the data directory
...
Locking just one db turns out to not have been a good idea, since
the pool and p2p state fdles have to be used anyway.
Also ensure the directory exists before tring to lock.
2016-02-04 18:09:45 +00:00
moneromooo-monero
7658ac0f45
blockchain: revert handle_get_objects adding block id on tx not found
...
This differs from the original CN code, and there seems to be
no reason to include the block itself, if it was found
2016-02-03 21:08:03 +00:00
moneromooo-monero
3a0f4d8a57
berkeleydb: fix delete/free mismatch
...
Despite being C++, the stats object is allocated by the underlying
C layer using malloc(3).
2016-02-03 08:49:11 +00:00
Thomas Winget
1642be242d
minor bugfixes and refactoring
...
- Blockchain should store if it's running on testnet or not
- moved loading compiled-in block hashes to its own function for clarity
- on handle_get_objects, should now correctly return false if a block's
transactions are missing
- replace instances of BOOST_FOREACH with C++11 for loops in Blockchain.
2016-02-02 18:58:39 +00:00
moneromooo-monero
64a2aa3376
hardfork: allow passing chain height in get(height) for convenience
2016-02-01 20:06:55 +00:00
Riccardo Spagni
616df496e9
Revert "Merge pull request #632 "
...
This reverts commit 58f890652e39d73d2a27
2016-01-31 15:49:11 +02:00
Riccardo Spagni
f780f2e7ba
Merge pull request #635
...
8b3539b
2016-01-31 15:22:14 +02:00
Riccardo Spagni
569316aea3
Merge pull request #634
...
7fc6fa35e1a739
2016-01-31 15:21:45 +02:00
