After popping blocks from the old chain, the hard fork object's
notion of the current version was not in line with the new height,
causing the first blocks from the new chain to be rejected due
to a false expection of a newer version.
A bug in cold signing caused a spurious pubkey to be included
in transactions, so we need to ensure we use the correct one
when sending outputs from one of those.
If the block reward to use for the fee calculation can't be
calculated (should not happen in practice), use a high bound,
so we use a fee overestimate that will be accepted by the network.
The vast majority of transactions will have just one tx pubkey,
but a bug with cold wallet signing caused two such keys to be
there, with the second one being the real one.
Added a new command to the P2P protocol definitions to allow querying for support flags.
Implemented handling of new support flags command in net_node. Changed for_each callback template to include support flags. Updated print_connections command to show peer support flags.
Added p2p constant for signaling fluffy block support.
Added get_pool_transaction function to cryptnote_core.
Added new commands to cryptonote protocol for relaying fluffy blocks.
Implemented handling of fluffy block command in cryptonote protocol.
Enabled fluffy block support in node initial configuration.
Implemented get_testnet function in cryptonote_core.
Made it so that fluffy blocks only run on testnet.
Compute derivation only once per tx, instead of once per output. Approx 33% faster while using 75% as much CPU on my machine. Note old functions in cryptonote_core (lookup_acc_outs and is_out_to_acc) are still used by tests.
The fee will vary based on the base reward and the current
block size limit:
fee = (R/R0) * (M0/M) * F0
R: base reward
R0: reference base reward (10 monero)
M: block size limit
M0: minimum block size limit (60000)
F0: 0.002 monero
Starts applying at v4
25% of the outputs are selected from the last 5 days (if possible),
in order to avoid the common case of sending recently received
outputs again. 25% and 5 days are subject to review later, since
it's just a wallet level change.
4038e86 Add performance timers for ringct tx verification (moneromooo-monero)
74dfdb0 perf_timer: new class and macros to make performance logs easier (moneromooo-monero)
10be903 Brackets to prevent premature return (NanoAkron)
fb1785a Brackets to ensure doesn't function prematurely return (NanoAkron)
8ed0d72 Moved logging to target functions rather than caller (NanoAkron)
442bfd1 Added messages at log level 2 to reflect deactivation procedure (NanoAkron)
bba6af9 wallet: cold wallet transaction signing (moneromooo-monero)
9872dcb wallet: fix log confusion between bytes and kilobytes (moneromooo-monero)
d9b0bf9 cryptonote_core: make extra field removal more generic (moneromooo-monero)
98f19d4 serialization: add support for serializing std::pair and std::list (moneromooo-monero)
This change adds the ability to create a new unsigned transaction
from a watch only wallet, and save it to a file. This file can
then be moved to another computer/VM where a cold wallet may load
it, sign it, and save it. That cold wallet does not need to have
a blockchain nor daemon. The signed transaction file can then be
moved back to the watch only wallet, which can load it and send
it to the daemon.
Two new simplewallet commands to use it:
sign_transfer (on the cold wallet)
submit_transfer (on the watch only wallet)
The transfer command used on a watch only wallet now writes an
unsigned transaction set in a file called 'unsigned_monero_tx'
instead of submitting the tx to the daemon as a normal wallet does.
The signed tx file is called 'signed_monero_tx'.
Keep the immediate direct deps at the library that depends on them,
declare deps as PUBLIC so that targets that link against that library
get the library's deps as transitive deps.
Break dep cycle between blockchain_db <-> crytonote_core.
No code refactoring, just hide cycle from cmake so that
it doesn't complain (cycles are allowed only between
static libs, not shared libs).
This is in preparation for supproting BUILD_SHARED_LIBS cmake
built-in option for building internal libs as shared.
Since this queries block heights for blocks that may or may not
exist, queries for non existing blocks would throw an exception,
and that would slow down the loop a lot. 7 seconds to go through
a 30 hash list.
Fix this by adding an optional return block height to block_exists
and using this instead. Actual errors will still throw an
exception.
This also cuts down on log exception spam.
The code used to cap at 5000 blocks per sync. It also treated 0 as 1.
Remove these checks; if specified as 0 do no periodic syncs at all.
Then the user is responsible for syncing in some external process.
When RingCT is enabled, outputs from coinbase transactions
are created as a single output, and stored as RingCT output,
with a fake mask. Their amount is not hidden on the blockchain
itself, but they are then able to be used as fake inputs in
a RingCT ring. Since the output amounts are hidden, their
"dustiness" is not an obstacle anymore to mixing, and this
makes the coinbase transactions a lot smaller, as well as
helping the TXO set to grow more slowly.
Also add a new "Null" type of rct signature, which decreases
the size required when no signatures are to be stored, as
in a coinbase tx.
This allows the key to be not the same for two outputs sent to
the same address (eg, if you pay yourself, and also get change
back). Also remove the key amounts lists and return parameters
since we don't actually generate random ones, so we don't need
to save them as we can recalculate them when needed if we have
the correct keys.
The whole rct data apart from the MLSAGs is now included in
the signed message, to avoid malleability issues.
Instead of passing the data that's not serialized as extra
parameters to the verification API, the transaction is modified
to fill all that information. This means the transaction can
not be const anymore, but it cleaner in other ways.
Since these are needed at the same time as the output pubkeys,
this is a whole lot faster, and takes less space. Only outputs
of 0 amount store the commitment. When reading other outputs,
a fake commitment is regenerated on the fly. This avoids having
to rewrite the database to add space for fake commitments for
existing outputs.
This code relies on two things:
- LMDB must support fixed size records per key, rather than
per database (ie, all records on key 0 are the same size, all
records for non 0 keys are same size, but records from key 0
and non 0 keys do have different sizes).
- the commitment must be directly after the rest of the data
in outkey and output_data_t.
The mixRing (output keys and commitments) and II fields (key images)
can be reconstructed from vin data.
This saves some modest amount of space in the tx.
It may be suboptimal, but it's a pain to have to rebuild everything
when some of this changes.
Also, no clue why there seems to be two different code paths for
serializing a tx...
This plugs a privacy leak from the wallet to the daemon,
as the daemon could previously see what input is included
as a transaction input, which the daemon hadn't previously
supplied. Now, the wallet requests a particular set of
outputs, including the real one.
This can result in transactions that can't be accepted if
the wallet happens to select too many outputs with non standard
unlock times. The daemon could know this and select another
output, but the wallet is blind to it. It's currently very
unlikely since I don't think anything uses non default
unlock times. The wallet requests more outputs than necessary
so it can use spares if any of the returns outputs are still
locked. If there are not enough spares to reach the desired
mixin, the transaction will fail.
This constrains the number of instances of any amount
to the unlocked ones (as defined by the default unlock time
setting: outputs with non default unlock time are not
considered, so may be counted as unlocked even if they are
not actually unlocked).
The tests for rejection of unmixable outputs in v2 are commented out,
as there are no unmixable outputs created anymore. This should be
restored at some point.
It sets the max number of threads to use for a parallel job.
This is different that the number of total threads, since monero
binaries typically start a lot of them.
When reaching the tail emission phase, the amount of coins will
eventually go over MONEY_SUPPLY, overflowing 64 bits. There was
a check added to blockchain_storage, but this was not ported to
the blockchain DB version.
Reported by smooth.
This can generate non decomposed outputs for very large block
rewards (or not so large ones if a miner decides to not quantize
the block rewards). Out of an abundance of caution, we refuse
to generate those. They are still accepted by the consensus code,
however.
d5d46e6 tests: obligatory hardfork unit build fix after interface change (moneromooo-monero)
25672d3 wallet: pass std::function by const ref, not value (moneromooo-monero)
0be6e08 wallet: do not leak owned amounts to the daemon unless --trusted-daemon (moneromooo-monero)
12146da wallet: change sweep_dust to sweep_unmixable (moneromooo-monero)
600a3cf New RPC and daemon command to get output histogram (moneromooo-monero)
f9a2fd2 wallet: handle rare case where fee adjustment can bump to the next kB (moneromooo-monero)
f26651a wallet: factor fee calculation (moneromooo-monero)
This allows appropriate action to be taken, like displaying
the reason to the user.
Do just that in simplewallet, which should help a lot in
determining why users fail to send.
Also make it so a tx which is accepted but not relayed is
seen as a success rather than a failure.
This is a list of existing output amounts along with the number
of outputs of that amount in the blockchain.
The daemon command takes:
- no parameters: all outputs with at least 3 instances
- one parameter: all outputs with at least that many instances
- two parameters: all outputs within that many instances
The default starts at 3 to avoid massive spamming of all dust
outputs in the blockchain, and is the current minimum mixin
requirement.
An optional vector of amounts may be passed, to request
histogram only for those outputs.
This was meant to go in v2, but the miner tx slipped through
the cracks as it doesn't go through the main tx verification
since it doesn't get added to the pool.
tx_pool.h doxygen documentation completed.
Many notes made on areas for improvement, be that functionality or
code clarity.
Commented code and unused code removed.
The functions in src/cryptonote_core/checkpoints_create.{h,cpp} should
be member functions of the checkpoints class, if nothing else for the
sake of keeping their documentation together.
This commit covers moving those functions to be member functions of the
checkpoints class as well as documenting those functions.
All functions in src/cryptonote_core/checkpoints.h are now documented in
doxygen style.
checkpoints.cpp has been reviewed, one function has been marked for
discussion on correctness.
All functions are now documented in doxygen format. Comments have been
updated to reflect the current state of the code. Many areas for
improvement in clarity and design have been noted, as well as cruft to
be removed. These changes are not reflected in this commit both to
allow time for comment and to keep commits organized by purpose.
This is already the default for the daemon, but by checking a command
line argument and calling a Blockchain member function setter.
Initialize the variable to false so it's not dependent on an external
command-line argument check. This allows utilities like
blockchain_import to have a reasonable default without code changes.
c2a1fee simplewallet: prompt for private keys when generating wallets (moneromooo-monero)
4513b4c simplewallet: add a new --restore-from-keys option (moneromooo-monero)
We also replace the --fakechain option with an optional structure
containing details about configuration for the core/blockchain,
for test purposes. This seems more future friendly.
7658ac0 blockchain: revert handle_get_objects adding block id on tx not found (moneromooo-monero)
3a0f4d8 berkeleydb: fix delete/free mismatch (moneromooo-monero)
1642be2 minor bugfixes and refactoring (Thomas Winget)
098dcf2 unit_tests: fix mnemonics unit test testing invalid seeds (moneromooo-monero)
Locking just one db turns out to not have been a good idea, since
the pool and p2p state fdles have to be used anyway.
Also ensure the directory exists before tring to lock.
- Blockchain should store if it's running on testnet or not
- moved loading compiled-in block hashes to its own function for clarity
- on handle_get_objects, should now correctly return false if a block's
transactions are missing
- replace instances of BOOST_FOREACH with C++11 for loops in Blockchain.
7fc6fa3 wallet: forbid dust altogether in output selection where appropriate (moneromooo-monero)
5e1a739 blockchain: log number of outputs available for a new tx (moneromooo-monero)
bcac101 daemon: fix a few issues reported by valgrind (moneromooo-monero)
a7e8174 tx_pool: fix serialization of new relayed data (moneromooo-monero)
601ad76 hardfork: fix mixup in indexing variable in get_voting_info (moneromooo-monero)
444e22f blockchain: remove unused timer (moneromooo-monero)
7edfdd8 blockchain: fix m_sync_counter uninitialized variable use (moneromooo-monero)
d97582c epee: use generate_random_bytes for new random uuids (moneromooo-monero)
17c7c9c epee: remove dodgy random code that nobody uses (moneromooo-monero)
A boost lock is used to determine whether more than one process
wants to access the database. The boost file_lock doesn't seem
to like locking directories, so we use an arbitrary file in it.
This allows to still run two daemons if they have different
database directories (ie, LMDB/BDB, different data directories).
