Merge pull request #1582

ad95e650 Added a note about smart mining to status command. Fixed up a bug where I was resetting bg mining enabled instead of started. Upped the miner threshold. Also moved setting of enabled on start above miner thread creation since starting with true, then stopping, then starting with false resulted in race condition. (Dion Ahmetaj)
e4dfd2fb Changed ac_line_status to on_battery_power. (Dion Ahmetaj)
23c73269 Use defined directive to silence pre-proc warnings. (Dion Ahmetaj)
d2c7d0f6 Cleaned up some logging. Thanks to moneromooo for help. (Dion Ahmetaj)
68652cd9 Added some //TODO comments pertaining to returning enums instead of bools in order to be better able to handle failure states. (Dion Ahmetaj)
0b1045ed Moved around checking of AC power in order to bail quicker to sleep if not plugged in. (Dion Ahmetaj)
2937fdbb Moved setting of previous process times to block where background mining is started, and added an explicit sleep in that block to wait for some mining to occur. (Dion Ahmetaj)
21a1e025 Set background mining started bool to false on bg thread start. If mining::stop then mining::start, idle logic is re-run instead of starting immediately (if it was running before stop). (Dion Ahmetaj)
345ed482 Background/smart mining. If a users' computer is plugged into a power source, and CPU has been idle for some time, then begin mining to some threshold (don't destroy the users' CPU). (Dion Ahmetaj)

src/cryptonote_basic/miner.cpp

@@ -60,6 +60,10 @@ namespace cryptonote
     const command_line::arg_descriptor<std::string> arg_extra_messages =  {"extra-messages-file", "Specify file for extra messages to include into coinbase transactions", "", true};
     const command_line::arg_descriptor<std::string> arg_start_mining =    {"start-mining", "Specify wallet address to mining for", "", true};
     const command_line::arg_descriptor<uint32_t>      arg_mining_threads =  {"mining-threads", "Specify mining threads count", 0, true};
+    const command_line::arg_descriptor<bool>        arg_bg_mining_enable =  {"bg-mining-enable", "enable/disable background mining", true, true};
+    const command_line::arg_descriptor<uint64_t>    arg_bg_mining_min_idle_interval_seconds =  {"bg-mining-min-idle-interval", "Specify min lookback interval in seconds for determining idle state", miner::BACKGROUND_MINING_DEFAULT_MIN_IDLE_INTERVAL_IN_SECONDS, true};
+    const command_line::arg_descriptor<uint8_t>     arg_bg_mining_idle_threshold_percentage =  {"bg-mining-idle-threshold", "Specify minimum avg idle percentage over lookback interval", miner::BACKGROUND_MINING_DEFAULT_IDLE_THRESHOLD_PERCENTAGE, true};
+    const command_line::arg_descriptor<uint8_t>     arg_bg_mining_miner_target_percentage =  {"bg-mining-miner-target", "Specificy maximum percentage cpu use by miner(s)", miner::BACKGROUND_MINING_DEFAULT_MINING_TARGET_PERCENTAGE, true};
   }
 
 
@@ -77,7 +81,12 @@ namespace cryptonote
     m_hashes(0),
     m_do_print_hashrate(false),
     m_do_mining(false),
-    m_current_hash_rate(0)
+    m_current_hash_rate(0),
+    m_is_background_mining_enabled(false),
+    m_min_idle_seconds(BACKGROUND_MINING_DEFAULT_MIN_IDLE_INTERVAL_IN_SECONDS),
+    m_idle_threshold(BACKGROUND_MINING_DEFAULT_IDLE_THRESHOLD_PERCENTAGE),
+    m_mining_target(BACKGROUND_MINING_DEFAULT_MINING_TARGET_PERCENTAGE),
+    m_miner_extra_sleep(BACKGROUND_MINING_DEFAULT_MINER_EXTRA_SLEEP_MILLIS)
   {
 
   }
@@ -171,6 +180,10 @@ namespace cryptonote
     command_line::add_arg(desc, arg_extra_messages);
     command_line::add_arg(desc, arg_start_mining);
     command_line::add_arg(desc, arg_mining_threads);
+    command_line::add_arg(desc, arg_bg_mining_enable);
+    command_line::add_arg(desc, arg_bg_mining_min_idle_interval_seconds);
+    command_line::add_arg(desc, arg_bg_mining_idle_threshold_percentage);
+    command_line::add_arg(desc, arg_bg_mining_miner_target_percentage);
   }
   //-----------------------------------------------------------------------------------------------------
   bool miner::init(const boost::program_options::variables_map& vm, bool testnet)
@@ -213,6 +226,17 @@ namespace cryptonote
       }
     }
 
+    // Background mining parameters
+    // Let init set all parameters even if background mining is not enabled, they can start later with params set
+    if(command_line::has_arg(vm, arg_bg_mining_enable))
+      set_is_background_mining_enabled( command_line::get_arg(vm, arg_bg_mining_enable) );
+    if(command_line::has_arg(vm, arg_bg_mining_min_idle_interval_seconds))
+      set_min_idle_seconds( command_line::get_arg(vm, arg_bg_mining_min_idle_interval_seconds) );
+    if(command_line::has_arg(vm, arg_bg_mining_idle_threshold_percentage))
+      set_idle_threshold( command_line::get_arg(vm, arg_bg_mining_idle_threshold_percentage) );
+    if(command_line::has_arg(vm, arg_bg_mining_miner_target_percentage))
+      set_mining_target( command_line::get_arg(vm, arg_bg_mining_miner_target_percentage) );
+
     return true;
   }
   //-----------------------------------------------------------------------------------------------------
@@ -230,7 +254,7 @@ namespace cryptonote
     return m_threads_total;
   }
   //-----------------------------------------------------------------------------------------------------
-  bool miner::start(const account_public_address& adr, size_t threads_count, const boost::thread::attributes& attrs)
+  bool miner::start(const account_public_address& adr, size_t threads_count, const boost::thread::attributes& attrs, bool do_background)
   {
     m_mine_address = adr;
     m_threads_total = static_cast<uint32_t>(threads_count);
@@ -253,6 +277,7 @@ namespace cryptonote
 
     boost::interprocess::ipcdetail::atomic_write32(&m_stop, 0);
     boost::interprocess::ipcdetail::atomic_write32(&m_thread_index, 0);
+    set_is_background_mining_enabled(do_background);
     
     for(size_t i = 0; i != threads_count; i++)
     {
@@ -260,6 +285,13 @@ namespace cryptonote
     }
 
     LOG_PRINT_L0("Mining has started with " << threads_count << " threads, good luck!" );
+
+    if( get_is_background_mining_enabled() )
+    {
+      m_background_mining_thread = boost::thread(attrs, boost::bind(&miner::background_worker_thread, this));
+      LOG_PRINT_L0("Background mining controller thread started" );
+    }
+
     return true;
   }
   //-----------------------------------------------------------------------------------------------------
@@ -291,9 +323,18 @@ namespace cryptonote
     send_stop_signal();
     CRITICAL_REGION_LOCAL(m_threads_lock);
 
+    // In case background mining was active and the miner threads are waiting
+    // on the background miner to signal start. 
+    m_is_background_mining_started_cond.notify_all();
+
     for(boost::thread& th: m_threads)
       th.join();
 
+    // The background mining thread could be sleeping for a long time, so we
+    // interrupt it just in case
+    m_background_mining_thread.interrupt();
+    m_background_mining_thread.join();
+
     MINFO("Mining has been stopped, " << m_threads.size() << " finished" );
     m_threads.clear();
     return true;
@@ -321,7 +362,7 @@ namespace cryptonote
       boost::thread::attributes attrs;
       attrs.set_stack_size(THREAD_STACK_SIZE);
 
-      start(m_mine_address, m_threads_total, attrs);
+      start(m_mine_address, m_threads_total, attrs, get_is_background_mining_enabled());
     }
   }
   //-----------------------------------------------------------------------------------------------------
@@ -364,6 +405,19 @@ namespace cryptonote
         misc_utils::sleep_no_w(100);
         continue;
       }
+      else if( m_is_background_mining_enabled )
+      {
+        misc_utils::sleep_no_w(m_miner_extra_sleep);
+        while( !m_is_background_mining_started )
+        {
+          MGINFO("background mining is enabled, but not started, waiting until start triggers");
+          boost::unique_lock<boost::mutex> started_lock( m_is_background_mining_started_mutex );        
+          m_is_background_mining_started_cond.wait( started_lock );
+          if( m_stop ) break;
+        }
+        
+        if( m_stop ) continue;         
+      }
 
       if(local_template_ver != m_template_no)
       {
@@ -410,5 +464,344 @@ namespace cryptonote
     return true;
   }
   //-----------------------------------------------------------------------------------------------------
-}
+  bool miner::get_is_background_mining_enabled() const
+  {
+    return m_is_background_mining_enabled;
+  }
+  //-----------------------------------------------------------------------------------------------------
+  /**
+  * This has differing behaviour depending on if mining has been started/etc.
+  * Note: add documentation
+  */
+  bool miner::set_is_background_mining_enabled(bool is_background_mining_enabled)
+  {
+    m_is_background_mining_enabled = is_background_mining_enabled;
+    // Extra logic will be required if we make this function public in the future
+    // and allow toggling smart mining without start/stop
+    //m_is_background_mining_enabled_cond.notify_one();
+    return true;
+  }
+  //-----------------------------------------------------------------------------------------------------
+  uint64_t miner::get_min_idle_seconds() const
+  {
+    return m_min_idle_seconds;
+  }
+  //-----------------------------------------------------------------------------------------------------
+  bool miner::set_min_idle_seconds(uint64_t min_idle_seconds)
+  {
+    if(min_idle_seconds > BACKGROUND_MINING_MAX_MIN_IDLE_INTERVAL_IN_SECONDS) return false;
+    if(min_idle_seconds < BACKGROUND_MINING_MIN_MIN_IDLE_INTERVAL_IN_SECONDS) return false;
+    m_min_idle_seconds = min_idle_seconds;
+    return true;
+  }
+  //-----------------------------------------------------------------------------------------------------
+  uint8_t miner::get_idle_threshold() const
+  {
+    return m_idle_threshold;
+  }
+  //-----------------------------------------------------------------------------------------------------
+  bool miner::set_idle_threshold(uint8_t idle_threshold)
+  {
+    if(idle_threshold > BACKGROUND_MINING_MAX_IDLE_THRESHOLD_PERCENTAGE) return false;
+    if(idle_threshold < BACKGROUND_MINING_MIN_IDLE_THRESHOLD_PERCENTAGE) return false;
+    m_idle_threshold = idle_threshold;
+    return true;
+  }
+  //-----------------------------------------------------------------------------------------------------
+  uint8_t miner::get_mining_target() const
+  {
+    return m_mining_target;
+  }
+  //-----------------------------------------------------------------------------------------------------
+  bool miner::set_mining_target(uint8_t mining_target)
+  {
+    if(mining_target > BACKGROUND_MINING_MAX_MINING_TARGET_PERCENTAGE) return false;
+    if(mining_target < BACKGROUND_MINING_MIN_MINING_TARGET_PERCENTAGE) return false;
+    m_mining_target = mining_target;
+    return true;
+  }
+  //-----------------------------------------------------------------------------------------------------
+  bool miner::background_worker_thread()
+  {
+    uint64_t prev_total_time, current_total_time;
+    uint64_t prev_idle_time, current_idle_time;
+    uint64_t previous_process_time = 0, current_process_time = 0;
+    m_is_background_mining_started = false;
 
+    if(!get_system_times(prev_total_time, prev_idle_time))
+    {
+      LOG_ERROR("get_system_times call failed, background mining will NOT work!");
+      return false;
+    }
+    
+    while(!m_stop)
+    {
+        
+      try
+      {
+        // Commenting out the below since we're going with privatizing the bg mining enabled
+        // function, but I'll leave the code/comments here for anyone that wants to modify the
+        // patch in the future
+        // -------------------------------------------------------------------------------------
+        // All of this might be overkill if we just enforced some simple requirements
+        // about changing this variable before/after the miner starts, but I envision
+        // in the future a checkbox that you can tick on/off for background mining after
+        // you've clicked "start mining". There's still an issue here where if background
+        // mining is disabled when start is called, this thread is never created, and so
+        // enabling after does nothing, something I have to fix in the future. However,
+        // this should take care of the case where mining is started with bg-enabled, 
+        // and then the user decides to un-check background mining, and just do
+        // regular full-speed mining. I might just be over-doing it and thinking up 
+        // non-existant use-cases, so if the concensus is to simplify, we can remove all this fluff.
+        /*
+        while( !m_is_background_mining_enabled )
+        {
+          MGINFO("background mining is disabled, waiting until enabled!");
+          boost::unique_lock<boost::mutex> enabled_lock( m_is_background_mining_enabled_mutex );        
+          m_is_background_mining_enabled_cond.wait( enabled_lock );
+        } 
+        */       
+        
+        // If we're already mining, then sleep for the miner monitor interval.
+        // If we're NOT mining, then sleep for the idle monitor interval
+        boost::this_thread::sleep_for( 
+          m_is_background_mining_started ? 
+            boost::chrono::seconds( BACKGROUND_MINING_MINER_MONITOR_INVERVAL_IN_SECONDS ) :
+            boost::chrono::seconds( get_min_idle_seconds() ) );
+      }
+      catch(const boost::thread_interrupted&)
+      {
+        MDEBUG("background miner thread interrupted ");
+        continue; // if interrupted because stop called, loop should end ..
+      }
+
+      bool on_ac_power = !on_battery_power();
+
+      if( m_is_background_mining_started )
+      {
+        // figure out if we need to stop, and monitor mining usage
+        
+        // If we get here, then previous values are initialized.
+        // Let's get some current data for comparison.
+
+        if(!get_system_times(current_total_time, current_idle_time))
+        {
+          MERROR("get_system_times call failed");
+          continue;
+        }
+
+        if(!get_process_time(current_process_time))
+        {
+          MERROR("get_process_time call failed!");
+          continue;
+        }
+
+        uint64_t total_diff = (current_total_time - prev_total_time);
+        uint64_t idle_diff = (current_idle_time - prev_idle_time);
+        uint64_t process_diff = (current_process_time - previous_process_time);
+        uint8_t idle_percentage = get_percent_of_total(idle_diff, total_diff);
+        uint8_t process_percentage = get_percent_of_total(process_diff, total_diff);
+
+        MGINFO("idle percentage is " << unsigned(idle_percentage) << "\%, miner percentage is " << unsigned(process_percentage) << "\%, ac power : " << on_ac_power);
+        if( idle_percentage + process_percentage < get_idle_threshold() || !on_ac_power )
+        {
+          MGINFO("cpu is " << unsigned(idle_percentage) << "% idle, idle threshold is " << unsigned(get_idle_threshold()) << "\%, ac power : " << on_ac_power << ", background mining stopping, thanks for your contribution!");
+          m_is_background_mining_started = false;
+
+          // reset process times
+          previous_process_time = 0;
+          current_process_time = 0;
+        }
+        else
+        {
+          previous_process_time = current_process_time;
+
+          // adjust the miner extra sleep variable
+          int64_t miner_extra_sleep_change = (-1 * (get_mining_target() - process_percentage) );
+          int64_t new_miner_extra_sleep = m_miner_extra_sleep + miner_extra_sleep_change;
+          // if you start the miner with few threads on a multicore system, this could
+          // fall below zero because all the time functions aggregate across all processors.
+          // I'm just hard limiting to 5 millis min sleep here, other options?
+          m_miner_extra_sleep = std::max( new_miner_extra_sleep , (int64_t)5 );
+          MDEBUG("m_miner_extra_sleep " << m_miner_extra_sleep);
+        }
+        
+        prev_total_time = current_total_time;
+        prev_idle_time = current_idle_time;
+      }
+      else if( on_ac_power )
+      {
+        // figure out if we need to start
+
+        if(!get_system_times(current_total_time, current_idle_time))
+        {
+          MERROR("get_system_times call failed");
+          continue;
+        }
+
+        uint64_t total_diff = (current_total_time - prev_total_time);
+        uint64_t idle_diff = (current_idle_time - prev_idle_time);
+        uint8_t idle_percentage = get_percent_of_total(idle_diff, total_diff);
+
+        MGINFO("idle percentage is " << unsigned(idle_percentage));
+        if( idle_percentage >= get_idle_threshold() && on_ac_power )
+        {
+          MGINFO("cpu is " << unsigned(idle_percentage) << "% idle, idle threshold is " << unsigned(get_idle_threshold()) << "\%, ac power : " << on_ac_power << ", background mining started, good luck!");
+          m_is_background_mining_started = true;
+          m_is_background_mining_started_cond.notify_all();
+
+          // Wait for a little mining to happen ..
+          boost::this_thread::sleep_for(boost::chrono::seconds( 1 ));
+
+          // Starting data ...
+          if(!get_process_time(previous_process_time))
+          {
+            m_is_background_mining_started = false;
+            MERROR("get_process_time call failed!");
+          }
+        }
+
+        prev_total_time = current_total_time;
+        prev_idle_time = current_idle_time;
+      }
+    }
+
+    return true;
+  }
+  //-----------------------------------------------------------------------------------------------------
+  bool miner::get_system_times(uint64_t& total_time, uint64_t& idle_time)
+  {
+    #ifdef _WIN32
+
+    	FILETIME idleTime;
+    	FILETIME kernelTime;
+    	FILETIME userTime;
+    	if ( GetSystemTimes( &idleTime, &kernelTime, &userTime ) != -1 )
+    	{
+        total_time =
+          ( (((uint64_t)(kernelTime.dwHighDateTime)) << 32) | ((uint64_t)kernelTime.dwLowDateTime) )
+          + ( (((uint64_t)(userTime.dwHighDateTime)) << 32) | ((uint64_t)userTime.dwLowDateTime) );
+
+        idle_time = ( (((uint64_t)(idleTime.dwHighDateTime)) << 32) | ((uint64_t)idleTime.dwLowDateTime) );
+
+        return true;
+    	}
+
+    #elif defined(__linux__)
+
+      const std::string STR_CPU("cpu");
+      const std::size_t STR_CPU_LEN = STR_CPU.size();
+      const std::string STAT_FILE_PATH = "/proc/stat";
+
+      if( !epee::file_io_utils::is_file_exist(STAT_FILE_PATH) )
+      {
+        LOG_ERROR("'" << STAT_FILE_PATH << "' file does not exist");
+        return false;
+      }
+
+      std::ifstream stat_file_stream(STAT_FILE_PATH);
+      if( stat_file_stream.fail() )
+      {
+        LOG_ERROR("failed to open '" << STAT_FILE_PATH << "'");
+        return false;
+      }
+
+      std::string line;
+      std::getline(stat_file_stream, line);
+      std::istringstream stat_file_iss(line);
+      stat_file_iss.ignore(65536, ' '); // skip cpu label ...
+      uint64_t utime, ntime, stime, itime;
+      if( !(stat_file_iss >> utime && stat_file_iss >> ntime && stat_file_iss >> stime && stat_file_iss >> itime) )
+      {
+        LOG_ERROR("failed to read '" << STAT_FILE_PATH << "'");
+        return false;
+      }
+
+      idle_time = itime;
+      total_time = utime + ntime + stime + itime;
+
+      return true;
+
+    #endif
+
+    return false; // unsupported systemm..
+  }
+  //-----------------------------------------------------------------------------------------------------
+  bool miner::get_process_time(uint64_t& total_time)
+  {
+    #ifdef _WIN32
+
+      FILETIME createTime;
+      FILETIME exitTime;
+      FILETIME kernelTime;
+      FILETIME userTime;
+      if ( GetProcessTimes( GetCurrentProcess(), &createTime, &exitTime, &kernelTime, &userTime ) != -1 )
+      {
+        total_time =
+          ( (((uint64_t)(kernelTime.dwHighDateTime)) << 32) | ((uint64_t)kernelTime.dwLowDateTime) )
+          + ( (((uint64_t)(userTime.dwHighDateTime)) << 32) | ((uint64_t)userTime.dwLowDateTime) );
+
+        return true;
+      }
+
+    #elif defined(__linux__) && defined(_SC_CLK_TCK)
+
+      struct tms tms;
+      if ( times(&tms) != (clock_t)-1 )
+      {
+    		total_time = tms.tms_utime + tms.tms_stime;
+        return true;
+      }
+
+    #endif
+
+    return false; // unsupported system..
+  }
+  //-----------------------------------------------------------------------------------------------------  
+  uint8_t miner::get_percent_of_total(uint64_t other, uint64_t total)
+  {
+    return (uint8_t)( ceil( (other * 1.f / total * 1.f) * 100) );    
+  }
+  //-----------------------------------------------------------------------------------------------------    
+  bool miner::on_battery_power()
+  {
+    #ifdef _WIN32
+
+      SYSTEM_POWER_STATUS power_status;
+    	if ( GetSystemPowerStatus( &power_status ) != 0 )
+    	{
+        return power_status.ACLineStatus != 1;
+    	}
+
+    #elif defined(__linux__)
+
+      // i've only tested on UBUNTU, these paths might be different on other systems
+      // need to figure out a way to make this more flexible
+      const std::string POWER_SUPPLY_STATUS_PATH = "/sys/class/power_supply/ACAD/online";
+
+      if( !epee::file_io_utils::is_file_exist(POWER_SUPPLY_STATUS_PATH) )
+      {
+        LOG_ERROR("'" << POWER_SUPPLY_STATUS_PATH << "' file does not exist, can't determine if on AC power");
+        return false;
+      }
+
+      std::ifstream power_stream(POWER_SUPPLY_STATUS_PATH);
+      if( power_stream.fail() )
+      {
+        LOG_ERROR("failed to open '" << POWER_SUPPLY_STATUS_PATH << "'");
+        return false;
+      }
+
+      return power_stream.get() != '1';
+
+    #endif
+    
+    LOG_ERROR("couldn't query power status");
+    return false; // shouldn't get here unless no support for querying battery status
+    // TODO: return enum with ability to signify failure in querying for power status
+    // and change bg-mining logic so that it stops. As @vtnerd states, with the current
+    // setup "If someone enabled background mining on a system that fails to grab ac
+    // status, it will just continually check with little hope of ever being resolved
+    // automagically". This is also the case for time/idle stats functions.
+  }
+}

src/cryptonote_basic/miner.h

@@ -35,7 +35,14 @@
 #include "cryptonote_basic.h"
 #include "difficulty.h"
 #include "math_helper.h"
-
+#ifdef _WIN32
+#include <windows.h>
+#elif defined(__linux__)
+#include <unistd.h>
+#include <sys/resource.h>
+#include <sys/times.h>
+#include <time.h>
+#endif
 
 namespace cryptonote
 {
@@ -60,7 +67,7 @@ namespace cryptonote
     static void init_options(boost::program_options::options_description& desc);
     bool set_block_template(const block& bl, const difficulty_type& diffic, uint64_t height);
     bool on_block_chain_update();
-    bool start(const account_public_address& adr, size_t threads_count, const boost::thread::attributes& attrs);
+    bool start(const account_public_address& adr, size_t threads_count, const boost::thread::attributes& attrs, bool do_background = false);
     uint64_t get_speed() const;
     uint32_t get_threads_count() const;
     void send_stop_signal();
@@ -74,6 +81,26 @@ namespace cryptonote
     void pause();
     void resume();
     void do_print_hashrate(bool do_hr);
+    bool get_is_background_mining_enabled() const;
+    uint64_t get_min_idle_seconds() const;
+    bool set_min_idle_seconds(uint64_t min_idle_seconds);
+    uint8_t get_idle_threshold() const;
+    bool set_idle_threshold(uint8_t idle_threshold);
+    uint8_t get_mining_target() const;
+    bool set_mining_target(uint8_t mining_target);
+
+    static constexpr uint8_t  BACKGROUND_MINING_DEFAULT_IDLE_THRESHOLD_PERCENTAGE       = 90;
+    static constexpr uint8_t  BACKGROUND_MINING_MIN_IDLE_THRESHOLD_PERCENTAGE           = 50;
+    static constexpr uint8_t  BACKGROUND_MINING_MAX_IDLE_THRESHOLD_PERCENTAGE           = 99;
+    static constexpr uint16_t BACKGROUND_MINING_DEFAULT_MIN_IDLE_INTERVAL_IN_SECONDS    = 10;
+    static constexpr uint16_t BACKGROUND_MINING_MIN_MIN_IDLE_INTERVAL_IN_SECONDS        = 10;
+    static constexpr uint16_t BACKGROUND_MINING_MAX_MIN_IDLE_INTERVAL_IN_SECONDS        = 3600;
+    static constexpr uint8_t  BACKGROUND_MINING_DEFAULT_MINING_TARGET_PERCENTAGE        = 40;
+    static constexpr uint8_t  BACKGROUND_MINING_MIN_MINING_TARGET_PERCENTAGE            = 5;
+    static constexpr uint8_t  BACKGROUND_MINING_MAX_MINING_TARGET_PERCENTAGE            = 50;
+    static constexpr uint8_t  BACKGROUND_MINING_MINER_MONITOR_INVERVAL_IN_SECONDS       = 10;
+    static constexpr uint64_t BACKGROUND_MINING_DEFAULT_MINER_EXTRA_SLEEP_MILLIS        = 400; // ramp up 
+    static constexpr uint64_t BACKGROUND_MINING_MIN_MINER_EXTRA_SLEEP_MILLIS            = 5;
 
   private:
     bool worker_thread();
@@ -119,8 +146,24 @@ namespace cryptonote
     bool m_do_print_hashrate;
     bool m_do_mining;
 
+    // background mining stuffs ..
+
+    bool set_is_background_mining_enabled(bool is_background_mining_enabled);
+    bool background_worker_thread();
+    std::atomic<bool> m_is_background_mining_enabled;
+    boost::mutex m_is_background_mining_enabled_mutex;
+    boost::condition_variable m_is_background_mining_enabled_cond;
+    std::atomic<bool> m_is_background_mining_started;
+    boost::mutex m_is_background_mining_started_mutex;
+    boost::condition_variable m_is_background_mining_started_cond;    
+    boost::thread m_background_mining_thread;
+    uint64_t m_min_idle_seconds;
+    uint8_t m_idle_threshold;
+    uint8_t m_mining_target;
+    std::atomic<uint64_t> m_miner_extra_sleep;
+    static bool get_system_times(uint64_t& total_time, uint64_t& idle_time);
+    static bool get_process_time(uint64_t& total_time);
+    static uint8_t get_percent_of_total(uint64_t some_time, uint64_t total_time);
+    static bool on_battery_power();
   };
 }
-
-
-

src/daemon/command_parser_executor.cpp

@@ -271,17 +271,24 @@ bool t_command_parser_executor::start_mining(const std::vector<std::string>& arg
   if(testnet)
     std::cout << "Mining to a testnet address, make sure this is intentional!" << std::endl;
   uint64_t threads_count = 1;
-  if(args.size() > 2)
+  bool do_background_mining = false;  
+  if(args.size() > 3)
   {
     return false;
   }
-  else if(args.size() == 2)
+  
+  if(args.size() == 3)
+  {
+    do_background_mining = args[2] == "true";
+  }
+  
+  if(args.size() >= 2)
   {
     bool ok = epee::string_tools::get_xtype_from_string(threads_count, args[1]);
     threads_count = (ok && 0 < threads_count) ? threads_count : 1;
   }
 
-  m_executor.start_mining(adr, threads_count, testnet);
+  m_executor.start_mining(adr, threads_count, testnet, do_background_mining);
 
   return true;
 }

src/daemon/command_server.cpp

@@ -96,7 +96,7 @@ t_command_server::t_command_server(
   m_command_lookup.set_handler(
       "start_mining"
     , std::bind(&t_command_parser_executor::start_mining, &m_parser, p::_1)
-    , "Start mining for specified address, start_mining <addr> [<threads>], default 1 thread"
+    , "Start mining for specified address, start_mining <addr> [<threads>] [do_background_mining], default 1 thread, no background mining"
     );
   m_command_lookup.set_handler(
       "stop_mining"

src/daemon/rpc_command_executor.cpp

@@ -377,7 +377,7 @@ bool t_rpc_command_executor::show_status() {
     % (unsigned long long)(ires.target_height >= ires.height ? ires.target_height : ires.height)
     % get_sync_percentage(ires)
     % (ires.testnet ? "testnet" : "mainnet")
-    % (mining_busy ? "syncing" : mres.active ? "mining at " + get_mining_speed(mres.speed) : "not mining")
+    % (mining_busy ? "syncing" : mres.active ? ( ( mres.is_background_mining_enabled ? "smart " : "" ) + std::string("mining at ") + get_mining_speed(mres.speed) ) : "not mining")
     % get_mining_speed(ires.difficulty / ires.target)
     % (unsigned)hfres.version
     % get_fork_extra_info(hfres.earliest_height, ires.height, ires.target)
@@ -929,11 +929,12 @@ bool t_rpc_command_executor::print_transaction_pool_stats() {
   return true;
 }
 
-bool t_rpc_command_executor::start_mining(cryptonote::account_public_address address, uint64_t num_threads, bool testnet) {
+bool t_rpc_command_executor::start_mining(cryptonote::account_public_address address, uint64_t num_threads, bool testnet, bool do_background_mining = false) {
   cryptonote::COMMAND_RPC_START_MINING::request req;
   cryptonote::COMMAND_RPC_START_MINING::response res;
   req.miner_address = cryptonote::get_account_address_as_str(testnet, address);
   req.threads_count = num_threads;
+  req.do_background_mining = do_background_mining;
 
   std::string fail_message = "Mining did not start";
 

src/daemon/rpc_command_executor.h

@@ -106,7 +106,7 @@ public:
 
   bool print_transaction_pool_stats();
 
-  bool start_mining(cryptonote::account_public_address address, uint64_t num_threads, bool testnet);
+  bool start_mining(cryptonote::account_public_address address, uint64_t num_threads, bool testnet, bool do_background_mining);
 
   bool stop_mining();
 

src/rpc/core_rpc_server.cpp

@@ -635,7 +635,7 @@ namespace cryptonote
     boost::thread::attributes attrs;
     attrs.set_stack_size(THREAD_STACK_SIZE);
 
-    if(!m_core.get_miner().start(adr, static_cast<size_t>(req.threads_count), attrs))
+    if(!m_core.get_miner().start(adr, static_cast<size_t>(req.threads_count), attrs, req.do_background_mining))
     {
       res.status = "Failed, mining not started";
       LOG_PRINT_L0(res.status);
@@ -663,6 +663,7 @@ namespace cryptonote
 
     const miner& lMiner = m_core.get_miner();
     res.active = lMiner.is_mining();
+    res.is_background_mining_enabled = lMiner.get_is_background_mining_enabled();
     
     if ( lMiner.is_mining() ) {
       res.speed = lMiner.get_speed();

src/rpc/core_rpc_server_commands_defs.h

@@ -500,10 +500,12 @@ namespace cryptonote
     {
       std::string miner_address;
       uint64_t    threads_count;
+      bool        do_background_mining;
 
       BEGIN_KV_SERIALIZE_MAP()
         KV_SERIALIZE(miner_address)
         KV_SERIALIZE(threads_count)
+        KV_SERIALIZE(do_background_mining)        
       END_KV_SERIALIZE_MAP()
     };
 
@@ -608,6 +610,7 @@ namespace cryptonote
       uint64_t speed;
       uint32_t threads_count;
       std::string address;
+      bool is_background_mining_enabled;
 
       BEGIN_KV_SERIALIZE_MAP()
         KV_SERIALIZE(status)
@@ -615,6 +618,7 @@ namespace cryptonote
         KV_SERIALIZE(speed)
         KV_SERIALIZE(threads_count)
         KV_SERIALIZE(address)
+        KV_SERIALIZE(is_background_mining_enabled)
       END_KV_SERIALIZE_MAP()
     };
   };