wownero/contrib/epee/include/net/http_server_impl_base.h

130 lines
4.3 KiB
C
Raw Normal View History

// Copyright (c) 2006-2013, Andrey N. Sabelnikov, www.sabelnikov.net
2014-03-03 22:07:58 +00:00
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
// * Neither the name of the Andrey N. Sabelnikov nor the
// names of its contributors may be used to endorse or promote products
// derived from this software without specific prior written permission.
2014-07-23 13:03:52 +00:00
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
// ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
// WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER BE LIABLE FOR ANY
// DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
// ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
2014-07-23 13:03:52 +00:00
//
2014-03-03 22:07:58 +00:00
#pragma once
#include <boost/thread.hpp>
#include <boost/bind.hpp>
#include "net/http_server_cp2.h"
#include "net/http_server_handlers_map2.h"
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
#undef MONERO_DEFAULT_LOG_CATEGORY
#define MONERO_DEFAULT_LOG_CATEGORY "net.http"
2014-03-03 22:07:58 +00:00
namespace epee
{
2014-03-20 11:46:11 +00:00
template<class t_child_class, class t_connection_context = epee::net_utils::connection_context_base>
class http_server_impl_base: public net_utils::http::i_http_server_handler<t_connection_context>
2014-03-03 22:07:58 +00:00
{
public:
http_server_impl_base()
: m_net_server(epee::net_utils::e_connection_type_RPC)
2014-03-03 22:07:58 +00:00
{}
explicit http_server_impl_base(boost::asio::io_service& external_io_service)
: m_net_server(external_io_service)
{}
2017-12-21 11:45:01 +00:00
bool init(std::function<void(size_t, uint8_t*)> rng, const std::string& bind_port = "0", const std::string& bind_ip = "0.0.0.0",
std::vector<std::string> access_control_origins = std::vector<std::string>(),
boost::optional<net_utils::http::login> user = boost::none)
2014-03-03 22:07:58 +00:00
{
//set self as callback handler
m_net_server.get_config_object().m_phandler = static_cast<t_child_class*>(this);
2017-12-21 11:45:01 +00:00
m_net_server.get_config_object().rng = std::move(rng);
2014-03-03 22:07:58 +00:00
//here set folder for hosting reqests
m_net_server.get_config_object().m_folder = "";
//set access control allow origins if configured
std::sort(access_control_origins.begin(), access_control_origins.end());
m_net_server.get_config_object().m_access_control_origins = std::move(access_control_origins);
m_net_server.get_config_object().m_user = std::move(user);
MGINFO("Binding on " << bind_ip << ":" << bind_port);
2014-03-03 22:07:58 +00:00
bool res = m_net_server.init_server(bind_port, bind_ip);
if(!res)
{
LOG_ERROR("Failed to bind server");
return false;
}
return true;
}
bool run(size_t threads_count, bool wait = true)
{
//go to loop
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MINFO("Run net_service loop( " << threads_count << " threads)...");
2014-03-03 22:07:58 +00:00
if(!m_net_server.run_server(threads_count, wait))
{
LOG_ERROR("Failed to run net tcp server!");
}
if(wait)
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MINFO("net_service loop stopped.");
2014-03-03 22:07:58 +00:00
return true;
}
bool deinit()
{
return m_net_server.deinit_server();
}
bool timed_wait_server_stop(uint64_t ms)
{
return m_net_server.timed_wait_server_stop(ms);
}
bool send_stop_signal()
{
m_net_server.send_stop_signal();
return true;
}
int get_binded_port()
{
return m_net_server.get_binded_port();
}
long get_connections_count() const
{
return m_net_server.get_connections_count();
}
2014-03-03 22:07:58 +00:00
protected:
2014-03-20 11:46:11 +00:00
net_utils::boosted_tcp_server<net_utils::http::http_custom_handler<t_connection_context> > m_net_server;
2014-03-03 22:07:58 +00:00
};
2015-01-02 16:52:46 +00:00
}